Tampa Fl Roll Call

Nut_N_Much · 06-18-2013, 11:14 PM

Quote:

Originally Posted by wildmark

Hi Joe, Good to meet you, I'm just up the road in Live Oak!

Sweet, thats close.. I'll PM you my cell so we can set up a meet.

Quote:

Originally Posted by OMGiGOTaZ

i'm in for a meet once I get the Z back

Should hopefully be next week

That would awesome, on 12 July USF is putting on another AutoX event. It's just for a good time, they have helmets to use, and the course wont tear up your cars. We should think about getting a big group of Z's out there. Entry fee isn't bad at all. When they post the event I'll stick the link to it in here if there is any interest.

Quote:

Originally Posted by wildmark

I don't suppose you still have this?

We need to talk, I may have my 2.5 inch Fast Intentions TDX, 18 inch resonators with Carbon Fiber cans for sell to a good home. The Stillen Exhaust went back to the owners car, so its off the market.

I also have a 3 inch Fast Intentions TDX, 12 inch resonators for sale as well. This is a hard to get exhaust and really should go to a Turbo/Super Charged car.

Huck · 06-18-2013, 11:44 PM

Hey Joe, just out of curiousity how would a 3" exhaust perform on an NA car? I don't know much about FI's 3" exhausts at all and thought they were only for turbo/SC applications.

I survived Zdayz 2013

(barely)

wildmark · 06-19-2013, 06:03 AM

Quote:

Originally Posted by Nut_N_Much

Sweet, thats close.. I'll PM you my cell so we can set up a meet.

That would awesome, on 12 July USF is putting on another AutoX event. It's just for a good time, they have helmets to use, and the course wont tear up your cars. We should think about getting a big group of Z's out there. Entry fee isn't bad at all. When they post the event I'll stick the link to it in here if there is any interest.

We need to talk, I may have my 2.5 inch Fast Intentions TDX, 18 inch resonators with Carbon Fiber cans for sell to a good home. The Stillen Exhaust went back to the owners car, so its off the market.

I also have a 3 inch Fast Intentions TDX, 12 inch resonators for sale as well. This is a hard to get exhaust and really should go to a Turbo/Super Charged car.

Hi Joe,

Thanks for that, the only two exhausts i'm interested in is the Stillen or the Invidia.

xxAGAVExx · 06-19-2013, 07:15 AM

Quote:

Originally Posted by Nut_N_Much

We need to talk, I may have my 2.5 inch Fast Intentions TDX, 18 inch resonators with Carbon Fiber cans for sell to a good home. The Stillen Exhaust went back to the owners car, so its off the market.

I also have a 3 inch Fast Intentions TDX, 12 inch resonators for sale as well. This is a hard to get exhaust and really should go to a Turbo/Super Charged car.

I might be interested in the FI cf 2.5" exhaust if its still around in a month or so

Nut_N_Much · 06-19-2013, 03:24 PM

Quote:

Originally Posted by Huck

Hey Joe, just out of curiousity how would a 3" exhaust perform on an NA car? I don't know much about FI's 3" exhausts at all and thought they were only for turbo/SC applications.
I survived Zdayz 2013 (barely)

For a none boost car the rule is you only want to go 1/4 over the stock size pipe. Our cars don't come with 2.5 inch exhaust from the factory a 3 inch would hurt your back pressure. You would have more flow but to a point that it would reduce performance instead of help it. Stillen starts out with the stock size up front and expands to 2.5 after the H_Pipe. 2.5 is the perfect size for our NA cars. Hope this helped some.

Quote:

Originally Posted by wildmark

Hi Joe,
Thanks for that, the only two exhausts i'm interested in is the Stillen or the Invidia.

Might look at the CNT too, good exhaust for a good price!

Quote:

Originally Posted by xxAGAVExx

I might be interested in the FI cf 2.5" exhaust if its still around in a month or so

Okay, sounds good. I need to do some research and find out what the right exhaust is for my set up. Month or so is good timing!!!!

xxAGAVExx · 06-19-2013, 04:34 PM

Quote:

Originally Posted by Nut_N_Much

Okay, sounds good. I need to do some research and find out what the right exhaust is for my set up. Month or so is good timing!!!!

Awesome!!!

Huck · 06-19-2013, 05:07 PM

Thanks man, I knew you can have too little back pressure but I didn't know if a 3" would be too much.

I survived Zdayz 2013

(barely)

wildmark · 06-19-2013, 06:44 PM

CNT..never heard of them?

Nut_N_Much · 06-19-2013, 08:34 PM

Quote:

Originally Posted by wildmark

CNT..never heard of them?

CNT RACING 09-11 Nissan 370z Bolt on catback Exhaust system

HKS/ARK Style Exhaust in stainless..

wildmark · 06-20-2013, 08:41 AM

I'm about to order the Invidia Gemini, can anyone recommend a good shop that's going to do a good shop, I don't like using the local chain shops, I have not had good experiences with them, its all about getting the work done a quick as possible and they cut corners, I want it done right the first time so I don't have to go back!!!

Mark

chpt11 · 06-20-2013, 08:09 PM

You will probably have the best luck with either:

Z Fever on N. Clark, or

S and R Performance on Hillsborough

Nut_N_Much · 06-20-2013, 08:25 PM

Quote:

Originally Posted by wildmark

I'm about to order the Invidia Gemini, can anyone recommend a good shop that's going to do a good shop, I don't like using the local chain shops, I have not had good experiences with them, its all about getting the work done a quick as possible and they cut corners, I want it done right the first time so I don't have to go back!!!

Mark

Good clean shop that does good work.
UNiTJDM - Welcome

Location:
13713 N. Nebraska Ave.
Tampa, FL 33613

Hours:
TUE - FRI 9:30 AM - 7:00 PM
SAT 9:00AM - 5:00 PM
SUN - MON CLOSED

or

You can bring it to my house and I'll install it for you. No charge, and I do good work for a few bucks.

OMGiGOTaZ · 06-21-2013, 09:19 AM

VANQUISH POWER SPORTS at 380 DOUGLAS RD E, OLDSMAR, FL, 34677

Here's My Rec...

FortuneLSX-TT · 06-21-2013, 11:17 AM

Quote:

Originally Posted by Nut_N_Much

Good clean shop that does good work.
UNiTJDM - Welcome
You can bring it to my house and I'll install it for you. No charge, and I do good work for a few bucks.

I'd take it to Nut_N_Much's. Save yourself a few bucks and use that money to have him do your headlights or buy some other mods.

wildmark · 06-21-2013, 11:20 AM

Quote:

Originally Posted by FortuneLSX-TT

I'd take it to Nut_N_Much's. Save yourself a few bucks and use that money to have him do your headlights or buy some other mods.

Thanks.

06-18-2013, 11:44 PM	#437 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	Hey Joe, just out of curiousity how would a 3" exhaust perform on an NA car? I don't know much about FI's 3" exhausts at all and thought they were only for turbo/SC applications. I survived Zdayz 2013 (barely) Nut_N_Much likes this. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

06-19-2013, 05:07 PM	#442 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 43 Posts: 5,075 Drives: Pantydropper machine Rep Power: 35	Thanks man, I knew you can have too little back pressure but I didn't know if a 3" would be too much. I survived Zdayz 2013 (barely) Nut_N_Much likes this. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

06-19-2013, 06:44 PM	#443 (permalink)
wildmark Base Member Join Date: Oct 2011 Location: Tampa, Florida Posts: 217 Drives: Chevy SS, FX50S Rep Power: 15	CNT..never heard of them? Nut_N_Much likes this.

06-20-2013, 08:41 AM	#445 (permalink)
wildmark Base Member Join Date: Oct 2011 Location: Tampa, Florida Posts: 217 Drives: Chevy SS, FX50S Rep Power: 15	I'm about to order the Invidia Gemini, can anyone recommend a good shop that's going to do a good shop, I don't like using the local chain shops, I have not had good experiences with them, its all about getting the work done a quick as possible and they cut corners, I want it done right the first time so I don't have to go back!!! Mark Nut_N_Much likes this.

06-20-2013, 08:09 PM	#446 (permalink)
chpt11 Enthusiast Member Join Date: Dec 2012 Location: Tampa Posts: 252 Drives: '13 SPT Magma 6M Rep Power: 14	You will probably have the best luck with either: Z Fever on N. Clark, or S and R Performance on Hillsborough Nut_N_Much likes this. __________________ FAST INTENTIONS CF CBE & TEST PIPES \| CARBON SIGNAL N-TYPE SPOILER \| FORGESTAR \|INJEN INTAKE \| EVO-R DIFFUSER \| TOMMY KAIRA \| MORE TO COME

06-21-2013, 09:19 AM	#448 (permalink)
OMGiGOTaZ Enthusiast Member Join Date: Jul 2012 Location: Florida Posts: 316 Drives: 12 370Z Auto Sport Rep Power: 14	VANQUISH POWER SPORTS at 380 DOUGLAS RD E, OLDSMAR, FL, 34677 Here's My Rec... Nut_N_Much likes this. __________________ all you gotta do is...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Western Washington Roll Call	NEWTOY370Z	North West Region	119	05-13-2020 09:04 PM
UK roll call	Paul_S	Europe	42	01-26-2016 01:33 AM
Roll Call!?!?	Rooskey	South East Region	2	08-30-2010 04:19 PM
San Diego Roll Call!	CrookedTeeth	New Forum Member	14	05-14-2009 01:19 AM