* NST Pulley Set 4 Sale *

VDC_OFF · 10-24-2012, 09:44 AM

Mike at NST says it should only take an hour and a half. If it takes longer, probably not a good mechanic. Also keep in mind that a small percentage of these pullies have to be sanded on the inside to get them to fit since they are already powdercoated and sometimes it could go on too thick. So if you powdercoat again, may want to make sure old powdercoat is completely removed first or else it will be too thick.

Nut_N_Much · 10-24-2012, 12:32 PM

Ooooooo yaaaaaa!!!!
Sale pending...

I was thinking about how the powder coat would affect the mounting and the Balance of the pulley. Your right about a second powder coat, i would soda blast them and tape off the mounting point. Mounting is a pain, ones I've done I heat up with a torch and they go on fairly easy. Getting them off of high mileage cars is a pain.

Ya brother I loved Guam, been there 6 times. Went out on a trail in a samurai back in some woods. I had a blast. That clay is hard to clean up. My back injuries are keeping me grounded so I am afraid I won't see Guam again. But dude if you need stuff bought and shipped I am your guy.

simota1 · 10-24-2012, 02:44 PM

Quote:

Originally Posted by Zoren 370

They took my pulley for just 1hr and half they had to clamp the flywheel though make sure they don't brake the gears.

BTW Nut n Much can even bring you ADOBO once he goes to Guam.

thats a HUGE difference.... ill probably check my friend who did my brakes and stillen header install

his really fast and does great work

but his shop rate is f-ing crazy lol thats why i checked my other guy and i think his just trying to make money OR just doesnt wanna do it

@ the adobo definitely man

if anything ill cook the adobo

Quote:

Originally Posted by VDC_OFF

Mike at NST says it should only take an hour and a half. If it takes longer, probably not a good mechanic. Also keep in mind that a small percentage of these pullies have to be sanded on the inside to get them to fit since they are already powdercoated and sometimes it could go on too thick. So if you powdercoat again, may want to make sure old powdercoat is completely removed first or else it will be too thick.

thanks for the tip VDC

Nut_N_Much · 10-25-2012, 11:27 AM

Pulley Set SOLD and SHIPPED!!!!
Thank you all for posting to the thread! Good buyer, quick and easy just the way I like it..

simota1 · 10-24-2012, 02:45 PM

Quote:

Originally Posted by Nut_N_Much

Ooooooo yaaaaaa!!!!
Sale pending...

I was thinking about how the powder coat would affect the mounting and the Balance of the pulley. Your right about a second powder coat, i would soda blast them and tape off the mounting point. Mounting is a pain, ones I've done I heat up with a torch and they go on fairly easy. Getting them off of high mileage cars is a pain.

Ya brother I loved Guam, been there 6 times. Went out on a trail in a samurai back in some woods. I had a blast. That clay is hard to clean up. My back injuries are keeping me grounded so I am afraid I won't see Guam again. But dude if you need stuff bought and shipped I am your guy.

thanks man

ill keep that in mind.... If your ever here again in the future dont hesistate to hit me up man

10-24-2012, 09:44 AM	#1 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 45 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	Mike at NST says it should only take an hour and a half. If it takes longer, probably not a good mechanic. Also keep in mind that a small percentage of these pullies have to be sanded on the inside to get them to fit since they are already powdercoated and sometimes it could go on too thick. So if you powdercoat again, may want to make sure old powdercoat is completely removed first or else it will be too thick. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

10-24-2012, 12:32 PM	#2 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Ooooooo yaaaaaa!!!! Sale pending... I was thinking about how the powder coat would affect the mounting and the Balance of the pulley. Your right about a second powder coat, i would soda blast them and tape off the mounting point. Mounting is a pain, ones I've done I heat up with a torch and they go on fairly easy. Getting them off of high mileage cars is a pain. Ya brother I loved Guam, been there 6 times. Went out on a trail in a samurai back in some woods. I had a blast. That clay is hard to clean up. My back injuries are keeping me grounded so I am afraid I won't see Guam again. But dude if you need stuff bought and shipped I am your guy. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 10-24-2012 at 12:43 PM.

10-25-2012, 11:27 AM	#4 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Sold Pulley Set SOLD and SHIPPED!!!! Thank you all for posting to the thread! Good buyer, quick and easy just the way I like it.. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB NST Pulley kit	370Zfeeler	Parts for sale (Private Classifieds)	4	02-24-2012 07:03 AM
Pulley help	hardroc86	Engine & Drivetrain	3	02-17-2012 09:39 PM
[WTB] NST UD pulley kit	ben1620	Parts for sale (Private Classifieds)	1	01-12-2012 06:25 PM
Fontana Nissan -- NST Pulley Kits Sale!	Scott@FontanaNissan	Nissanraceshop.com - Supporting Dealer	15	02-25-2010 06:13 PM
Pulley	>135I	Nissan 370Z General Discussions	4	05-22-2009 04:06 PM

*** NST Pulley Set 4 Sale ***

* NST Pulley Set 4 Sale *