40th anniversary seats

martin82 · 03-14-2012, 12:27 PM

I did a DIY so look for it. It is a simple plug and play all the harnesses are there. The only thing I still didn't finish was the heated seats (harness is there) just don't have the switches.

ga0887 · 03-14-2012, 01:17 PM

In for post cleaning/conditioning pics

shadoquad · 03-14-2012, 02:14 PM

Also, it's worth mentioning that the door cards are fairly easily removed. There are three bolts to remove, and you'll want to pop up the window/locking control area out, and then the door panel pops off with a gentle tug. The hardest part is feeding the window/locking control panel through the door card without scratching. The card is held on by a large number of phillips-head screws. It's very easy to do as a two-person job.

So, if you're considering the seats, consider shelling out for the door cards. IMO, it's worth it to make it all look consistent.

ask me how I know

diddy535 · 03-14-2012, 04:12 PM

So if you had a touring model (already heated seats, buttons for seats, etc.) would it be just a straight matter of unbolting and putting the new ones in?

shadoquad · 03-14-2012, 04:14 PM

Quote:

Originally Posted by diddy535

So if you had a touring model (already heated seats, buttons for seats, etc.) would it be just a straight matter of unbolting and putting the new ones in?

yes. You also have to deal with the wires for the electronics, but that's not too hard.

LafitteZ · 03-14-2012, 05:05 PM

Alright 1500 shipped!!!

LafitteZ · 03-14-2012, 05:08 PM

Ill do a clean swap on the door things too. Only if yours are black or red.

BeemaaZ · 03-14-2012, 05:10 PM

Quote:

Originally Posted by LafitteZ

Alright 1500 shipped!!!

I knew this one will be quick

hardroc86 · 03-14-2012, 05:33 PM

.....How would this look in a MB Z

LafitteZ · 03-14-2012, 06:22 PM

I'm sure it'll look good man.

Dallaz · 03-14-2012, 08:21 PM

I think some people are forgetting that they will be able to sell their touring seats to someone else with a base Z for a good chunk of change and hardly be spending any money. The swap would be extremely simple for the buyer. I want them also.

I'll PM you tomorrow I might take them after a discussion w/ the GF, assuming no one else got them.

Thechidz · 03-14-2012, 08:41 PM

you're killin me man I want these soooo bad, wish you were closer to NYC

BeemaaZ · 03-14-2012, 08:55 PM

Quote:

Originally Posted by diddy535

So if you had a touring model (already heated seats, buttons for seats, etc.) would it be just a straight matter of unbolting and putting the new ones in?

Correct. Someone with experience could switch seats between two cars in less than an hour.
You do not even have to switch the seat buckles

I unplugged the battery to reset the Airbags just in case.

LafitteZ · 03-14-2012, 09:22 PM

Yep easy easy switch.

Dallaz · 03-15-2012, 02:15 AM

PM'd

03-14-2012, 02:14 PM	#18 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	Also, it's worth mentioning that the door cards are fairly easily removed. There are three bolts to remove, and you'll want to pop up the window/locking control area out, and then the door panel pops off with a gentle tug. The hardest part is feeding the window/locking control panel through the door card without scratching. The card is held on by a large number of phillips-head screws. It's very easy to do as a two-person job. So, if you're considering the seats, consider shelling out for the door cards. IMO, it's worth it to make it all look consistent. ask me how I know Last edited by shadoquad; 03-14-2012 at 02:19 PM.

03-14-2012, 04:12 PM	#19 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 14	So if you had a touring model (already heated seats, buttons for seats, etc.) would it be just a straight matter of unbolting and putting the new ones in? __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

03-14-2012, 05:33 PM	#24 (permalink)
hardroc86 Base Member Join Date: Feb 2011 Location: Kansas City, MO Posts: 144 Drives: Nissan 370Z Blue AT Rep Power: 14	.....How would this look in a MB Z __________________ ~~~2010 MB 370Z 7AT 320HP - Top Speed Pro N-1 Exhaust, Top Speed Y-Pipe, CNT Resonated Racing Test Pipes, Stillen Gen3 Long Tube Cold Air Intake, Sport Spoiler and UpRev'd Tuned.~~~

03-14-2012, 08:21 PM	#26 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 15	I think some people are forgetting that they will be able to sell their touring seats to someone else with a base Z for a good chunk of change and hardly be spending any money. The swap would be extremely simple for the buyer. I want them also. I'll PM you tomorrow I might take them after a discussion w/ the GF, assuming no one else got them. __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

03-14-2012, 08:41 PM	#27 (permalink)
Thechidz A True Z Fanatic Join Date: Sep 2011 Location: NY Posts: 1,009 Drives: Nissan 370z Monti Bl Rep Power: 15	you're killin me man I want these soooo bad, wish you were closer to NYC __________________ I <3 my car

03-14-2012, 12:27 PM	#16 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	I did a DIY so look for it. It is a simple plug and play all the harnesses are there. The only thing I still didn't finish was the heated seats (harness is there) just don't have the switches.

03-14-2012, 01:17 PM	#17 (permalink)
ga0887 Base Member Join Date: May 2011 Location: Miami, FL Posts: 104 Drives: 2011 370Z KAD 6MT Rep Power: 13	In for post cleaning/conditioning pics

03-14-2012, 05:05 PM	#21 (permalink)
LafitteZ Track Member Join Date: Jan 2011 Location: lafitte, la Posts: 698 Drives: 40th anniversary Rep Power: 15	Alright 1500 shipped!!!

03-14-2012, 05:08 PM	#22 (permalink)
LafitteZ Track Member Join Date: Jan 2011 Location: lafitte, la Posts: 698 Drives: 40th anniversary Rep Power: 15	Ill do a clean swap on the door things too. Only if yours are black or red.

03-14-2012, 06:22 PM	#25 (permalink)
LafitteZ Track Member Join Date: Jan 2011 Location: lafitte, la Posts: 698 Drives: 40th anniversary Rep Power: 15	I'm sure it'll look good man.

03-14-2012, 09:22 PM	#29 (permalink)
LafitteZ Track Member Join Date: Jan 2011 Location: lafitte, la Posts: 698 Drives: 40th anniversary Rep Power: 15	Yep easy easy switch.

03-15-2012, 02:15 AM	#30 (permalink)
Dallaz A True Z Fanatic Join Date: Jun 2011 Location: North Dallas Posts: 1,272 Drives: 09MontereyBlu370z6MT Rep Power: 15	PM'd __________________ AeroJacket Lip Kit \| GTR switch \| NISMO S-Knob \| Blacked-Out-EVERYTHING\| 5% Tint \| Carbon Fangs/Upper Trim \| VOSSEN CV3's \| Painted Headlights \| CF Diffuser

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
40th seats?	LafitteZ	40th Anniversary 370Z	11	03-14-2012 11:46 PM
L.A. 40th Anniversary	ICENINE	40th Anniversary 370Z	9	02-08-2012 11:02 PM
feeler: nismo seats for 40th seats	IgleeI	Parts for sale (Private Classifieds)	12	03-14-2011 10:01 PM
WTT Gray leather seats+Cash for Red 40th Seats	Econ	Wanted	1	02-27-2011 03:24 PM
WTT: Black Leather/Suede Seats and Cash - for - Red 40th Anniversary 370Z Seats	'10Anamoly	Parts for sale (Private Classifieds)	8	08-14-2010 09:42 PM