Kinetix Intake Manifold - VQ37

Greedy · 03-04-2012, 08:12 PM

Price: Lower Price! - $800 - *Update - Will consider trades or trades + cash - Would have to fit a G37 coupe - maybe engine covers, electronics etc..*
Location: WA

I am selling my Kinetix Velocity Intake manifold for the VQ37HR. I purchased it from GTM while they were installing their TT kit on my 2008 coupe in 2010. Is was one of just two or three pre-production models available, and Kinetix still has not gone into production with them. After installation and some dyno tuning, it was apparent that it did not increase power over the stock intake manifold. I have a "function-over-form" mindset to my car and therefore decided to have them take it off and go back to stock. It has been sitting on my workbench since and I have finally decided to sell it.

Although it did not increase performance, this is a unique and rare engine dress up piece that you can't get anywhere else. It also has a nice metallic growl under acceleration.

Price includes shipping within the continental U.S. Here are some pics and a link to the thread I started about my TT install. Please contact me with any questions.

New G37 TT - MyG37

Thanks for Looking!

blackonorange · 03-04-2012, 08:14 PM

Jeez that's gorgeous

MattP725 · 03-04-2012, 08:23 PM

I think another benefit that isn't mentioned is this would probably make a direct port nitrous kit easier to route.

The runners are much more apparent on this manifold than the stock one.

eastwest2300 · 03-04-2012, 10:01 PM

Quote:

Originally Posted by blackonorange

Jeez that's gorgeous

Ni55anPat · 03-04-2012, 10:06 PM

Bling!!!!

happytheman · 03-04-2012, 10:31 PM

Whoa!

I would LOVE to see some mounted pics of this piece!

ccdominic · 03-04-2012, 10:51 PM

That's awesome looking. Glws.

cc370z · 03-04-2012, 11:24 PM

Wow that's looks good. Glws

Greedy · 03-04-2012, 11:58 PM

Updated with engine bay pic!

Skorch · 03-05-2012, 12:16 AM

Sick!

NoirG · 03-05-2012, 01:20 AM

Gorgeous

sixpax · 03-05-2012, 05:23 AM

damn that looks cool .... GLWS

DEpointfive0 · 03-05-2012, 06:01 AM

I must say, it looks amazing, but for NO gain in HP... A 350 intake can be retrofitted to make HP gains...

GLWS!!! Free bump

happytheman · 03-05-2012, 06:34 AM

So one should planning on swapping the front strut tower brace as well for this, correct? Thanks for the pic! Looks sick!

Jamaica · 03-05-2012, 07:21 AM

Major eye candy

03-04-2012, 08:12 PM	#1 (permalink)
Greedy Base Member Join Date: Jun 2010 Location: Woodinville, WA Posts: 46 Drives: G37 Rep Power: 14	Kinetix Intake Manifold - VQ37 Price: Lower Price! - $800 - Update - Will consider trades or trades + cash - Would have to fit a G37 coupe - maybe engine covers, electronics etc.. Location: WA I am selling my Kinetix Velocity Intake manifold for the VQ37HR. I purchased it from GTM while they were installing their TT kit on my 2008 coupe in 2010. Is was one of just two or three pre-production models available, and Kinetix still has not gone into production with them. After installation and some dyno tuning, it was apparent that it did not increase power over the stock intake manifold. I have a "function-over-form" mindset to my car and therefore decided to have them take it off and go back to stock. It has been sitting on my workbench since and I have finally decided to sell it. Although it did not increase performance, this is a unique and rare engine dress up piece that you can't get anywhere else. It also has a nice metallic growl under acceleration. Price includes shipping within the continental U.S. Here are some pics and a link to the thread I started about my TT install. Please contact me with any questions. New G37 TT - MyG37 Thanks for Looking! Last edited by Greedy; 05-01-2012 at 10:12 PM. Reason: Price Update

03-04-2012, 11:24 PM	#8 (permalink)
cc370z Enthusiast Member Join Date: Jan 2010 Location: AZ Posts: 467 Drives: 09 370z Rep Power: 15	Wow that's looks good. Glws Last edited by cc370z; 03-04-2012 at 11:28 PM.

03-05-2012, 12:16 AM	#10 (permalink)
Skorch Enthusiast Member Join Date: Feb 2009 Location: Phoenix, AZ Posts: 469 Drives: 2012 370Z Rep Power: 540	Sick! __________________ '12 370Z + Sport \| Stillen Gen3 Intakes \| Stillen UD Pulley \| Motordyne M370 \| FI Exhaust \| FI HFCs \| 4.08 Gears \| Uprev tuned

03-05-2012, 06:34 AM	#14 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	So one should planning on swapping the front strut tower brace as well for this, correct? Thanks for the pic! Looks sick! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kinetix 370Z/G37 Velocity Upper Intake Manifolds - Z1 Motorsports	Dustin@Z1	Intake/Exhaust	151	03-18-2013 09:37 AM
Kinetix 370Z Intake Plenum! Should i Buy it ?	Zedx	Intake/Exhaust	41	04-21-2012 12:59 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 06:17 PM
Kinetix Intake	Rooskey	Intake/Exhaust	6	12-09-2010 03:39 PM
Revshift Intake Manifold	Jamaica	Intake/Exhaust	22	07-13-2010 11:34 PM

03-04-2012, 08:14 PM	#2 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Jeez that's gorgeous

03-04-2012, 08:23 PM	#3 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	I think another benefit that isn't mentioned is this would probably make a direct port nitrous kit easier to route. The runners are much more apparent on this manifold than the stock one.

03-04-2012, 10:06 PM	#5 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,833 Drives: Zed Rep Power: 18	Bling!!!!

03-04-2012, 10:31 PM	#6 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Whoa! I would LOVE to see some mounted pics of this piece!

03-04-2012, 10:51 PM	#7 (permalink)
ccdominic Track Member Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 615 Drives: Built LS1/T56 RX7 FD Rep Power: 14	That's awesome looking. Glws.

03-04-2012, 11:58 PM	#9 (permalink)
Greedy Base Member Join Date: Jun 2010 Location: Woodinville, WA Posts: 46 Drives: G37 Rep Power: 14	Updated with engine bay pic!

03-05-2012, 01:20 AM	#11 (permalink)
NoirG A True Z Fanatic Join Date: Jun 2011 Location: West palm beach Posts: 1,113 Drives: G37S Rep Power: 15	Gorgeous

03-05-2012, 06:01 AM	#13 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	I must say, it looks amazing, but for NO gain in HP... A 350 intake can be retrofitted to make HP gains... GLWS!!! Free bump

03-05-2012, 07:21 AM	#15 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Major eye candy