FS: AccessPort for 09-10 370Z manual

omnomz · 06-19-2010, 12:16 AM

I have an accessport for sale, tuned by Cobb in dallas. Mine was the first one they tuned. car ran AMAZING! was tuned for Stillen gen 3 intakes, and invidia Q300 cat-back. I added test pipes later and it didnt affect it. The car made roughly 285whp on their dyno and almost 310 on another dyno with the test pipes, made 236lbs/ft from 3000 to redline nearly. Its redline is set at 8100 and it screams all the way there.

I'm looking for 350 shipped OBO.

I hardly got on here when I had my car, easiest to text me 903 944 8602

bumblez · 06-19-2010, 01:46 AM

Does this really support 2010 vehicle too??? I thought we don't have 2010 firmware yet.

omnomz · 06-19-2010, 02:04 AM

I figured it would be the same. I'll head down to the dealership next week if I havent sold it and slap it on one, see if it works.

AK370Z · 06-19-2010, 02:18 AM

Quote:

Originally Posted by omnomz

I figured it would be the same. I'll head down to the dealership next week if I havent sold it and slap it on one, see if it works.

Ok, cool. Keep us posted. Though I saw in another thread that 09 COBB probably WILL NOT work on 2010. Here's the small discussion:

Quote:

Originally Posted by bumblez

I just got mine today. While I was installing it, screen says This version of AP does not support this vehicle. So I couldn't install it. Does it matter if I have 2010 ECU??? My dealer had swap 09 ECU model to 10 ECU model because of the high pitch noise.

Quote:

Originally Posted by Kastley85891

Ya it matters dude, you need to pull that rom file with your AP and send it off to COBB to get it added to their 2010 release when it comes.
Although it wont install, you can pull the stock file from the ECU

OOI who here is running an AAM AP tune on a stock Z?

Quote:

Originally Posted by bumblez

Omg!!!

Quote:

Originally Posted by Red370

ahhh that sucks, sorry man, just might have to wait a bit,

shitty..

Quote:

Originally Posted by bumblez

So basically, 2009 and 2010 model use different firmware? Or different version of AP? If the only difference is firmware, better wait till they relase the firmware for 2010 model? Or I should return this. I searched a lot before I placed the order. But I couldn't find that 2010 model not work with this version of ap.

neway... I called Cobb support center and the Nissan programer will give answer tomorrow...

Quote:

Originally Posted by Kastley85891

Keep a hold of it, it happened to me on my 09, it was over Xmas break lol COBB sorted it for me NP. Its the same AP but it does not recognise the ECU id that is all.
Z is still relatively new and the new releases of ECU handles need to be incorperated to the 'accepted' database for the AP to see it and know it is able to install.

This will help

User Dump

Source: Just received my Accessport!

omnomz · 06-19-2010, 03:30 AM

The first accessport they (Neil at cobb) tried on my Z didnt work either, they had to grab another one.
Apparently each option on the car changes how the ECU is numbered or something like that. my car was a sport touring with leather and bose.

omnomz · 06-19-2010, 03:54 AM

Sorry for the grainy, iphone pics in bad lighting.

omnomz · 06-19-2010, 03:28 PM

Sale pending.

GoBoost · 06-20-2010, 04:02 PM

Very important --- BEFORE you sell your AP, make sure you uninstall it from your car! you have to go into the menu and click uninstall or it wont work on the next car.

I had that problem when i sold my evo.. luckily the guy that bought it brought it into the dealership and i got to uninstall it.

tomnavone · 06-20-2010, 04:52 PM

I also have a Cobb ap paper weight for sale also. Completely useless till the crack the vvel. good luck with the sale

06-19-2010, 12:16 AM	#1 (permalink)
omnomz Base Member Join Date: Apr 2009 Location: Tyler, Texas Posts: 30 Drives: 09 Nissan 370Z M6 Rep Power: 16	FS: AccessPort for 09-10 370Z manual I have an accessport for sale, tuned by Cobb in dallas. Mine was the first one they tuned. car ran AMAZING! was tuned for Stillen gen 3 intakes, and invidia Q300 cat-back. I added test pipes later and it didnt affect it. The car made roughly 285whp on their dyno and almost 310 on another dyno with the test pipes, made 236lbs/ft from 3000 to redline nearly. Its redline is set at 8100 and it screams all the way there. I'm looking for 350 shipped OBO. I hardly got on here when I had my car, easiest to text me 903 944 8602

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just received my Accessport!	Red370	Tuning	237	06-14-2010 09:01 PM
Accessport Maps?	Dr.Awkward	Tuning	25	05-26-2010 11:16 PM
Cobb AccessPort for 370Z!	drisko	Tuning	207	03-04-2010 08:07 PM
370Z AccessPORT Price Drop!	COBB Tuning	Tuning	23	02-14-2010 08:12 AM
Cobb AccessPort 07 - 08 Nissan 350Z & 09 370Z AP-NIS-003	nopistons	Parts for sale (Private Classifieds)	12	09-22-2009 12:35 AM

06-19-2010, 01:46 AM	#2 (permalink)
bumblez Enthusiast Member Join Date: Sep 2009 Location: VA Posts: 326 Drives: Amuse 370z Rep Power: 15	Does this really support 2010 vehicle too??? I thought we don't have 2010 firmware yet.

06-19-2010, 02:04 AM	#3 (permalink)
omnomz Base Member Join Date: Apr 2009 Location: Tyler, Texas Posts: 30 Drives: 09 Nissan 370Z M6 Rep Power: 16	I figured it would be the same. I'll head down to the dealership next week if I havent sold it and slap it on one, see if it works.

06-19-2010, 03:30 AM	#5 (permalink)
omnomz Base Member Join Date: Apr 2009 Location: Tyler, Texas Posts: 30 Drives: 09 Nissan 370Z M6 Rep Power: 16	The first accessport they (Neil at cobb) tried on my Z didnt work either, they had to grab another one. Apparently each option on the car changes how the ECU is numbered or something like that. my car was a sport touring with leather and bose.

06-19-2010, 03:54 AM	#6 (permalink)
omnomz Base Member Join Date: Apr 2009 Location: Tyler, Texas Posts: 30 Drives: 09 Nissan 370Z M6 Rep Power: 16	Sorry for the grainy, iphone pics in bad lighting.

06-19-2010, 03:28 PM	#7 (permalink)
omnomz Base Member Join Date: Apr 2009 Location: Tyler, Texas Posts: 30 Drives: 09 Nissan 370Z M6 Rep Power: 16	Sale pending.

06-20-2010, 04:02 PM	#8 (permalink)
GoBoost Base Member Join Date: Apr 2010 Location: Cabot, AR Posts: 51 Drives: '08 Evo X Rep Power: 15	Very important --- BEFORE you sell your AP, make sure you uninstall it from your car! you have to go into the menu and click uninstall or it wont work on the next car. I had that problem when i sold my evo.. luckily the guy that bought it brought it into the dealership and i got to uninstall it.

06-20-2010, 04:52 PM	#9 (permalink)
tomnavone Track Member Join Date: Apr 2009 Location: S.F. Bay Area Posts: 723 Drives: Supercharged 370z Rep Power: 17	I also have a Cobb ap paper weight for sale also. Completely useless till the crack the vvel. good luck with the sale