Nissan 370Z Forum - FS: AccessPort for 09-10 370Z manual

Nissan 370Z Forum (http://www.the370z.com/)

- Parts for sale (Private Classifieds) (http://www.the370z.com/parts-sale-private-classifieds/)

- - FS: AccessPort for 09-10 370Z manual (http://www.the370z.com/parts-sale-private-classifieds/20804-fs-accessport-09-10-370z-manual.html)

FS: AccessPort for 09-10 370Z manual

I have an accessport for sale, tuned by Cobb in dallas. Mine was the first one they tuned. car ran AMAZING! was tuned for Stillen gen 3 intakes, and invidia Q300 cat-back. I added test pipes later and it didnt affect it. The car made roughly 285whp on their dyno and almost 310 on another dyno with the test pipes, made 236lbs/ft from 3000 to redline nearly. Its redline is set at 8100 and it screams all the way there.

I'm looking for 350 shipped OBO.

I hardly got on here when I had my car, easiest to text me 903 944 8602

Does this really support 2010 vehicle too??? I thought we don't have 2010 firmware yet.

I figured it would be the same. I'll head down to the dealership next week if I havent sold it and slap it on one, see if it works.

Quote:

Originally Posted by omnomz (Post 584292)

I figured it would be the same. I'll head down to the dealership next week if I havent sold it and slap it on one, see if it works.

Ok, cool. Keep us posted. Though I saw in another thread that 09 COBB probably WILL NOT work on 2010. Here's the small discussion:

Quote:

Originally Posted by bumblez (Post 560910)

I just got mine today. While I was installing it, screen says This version of AP does not support this vehicle. So I couldn't install it. Does it matter if I have 2010 ECU??? My dealer had swap 09 ECU model to 10 ECU model because of the high pitch noise.

Quote:

Originally Posted by Kastley85891 (Post 560950)

Ya it matters dude, you need to pull that rom file with your AP and send it off to COBB to get it added to their 2010 release when it comes.
Although it wont install, you can pull the stock file from the ECU

OOI who here is running an AAM AP tune on a stock Z?

Quote:

Originally Posted by bumblez (Post 560960)

Omg!!!:eek:

Quote:

Originally Posted by Red370 (Post 560969)

ahhh that sucks, sorry man, just might have to wait a bit, :shakes head: shitty..

Quote:

Originally Posted by bumblez (Post 561112)

So basically, 2009 and 2010 model use different firmware? Or different version of AP? If the only difference is firmware, better wait till they relase the firmware for 2010 model? Or I should return this. I searched a lot before I placed the order. But I couldn't find that 2010 model not work with this version of ap.:shakes head: neway... I called Cobb support center and the Nissan programer will give answer tomorrow...

Quote:

Originally Posted by Kastley85891 (Post 561480)

Keep a hold of it, it happened to me on my 09, it was over Xmas break lol COBB sorted it for me NP. Its the same AP but it does not recognise the ECU id that is all.
Z is still relatively new and the new releases of ECU handles need to be incorperated to the 'accepted' database for the AP to see it and know it is able to install.

This will help

User Dump

Source: http://www.the370z.com/tuning/15851-...essport-6.html

The first accessport they (Neil at cobb) tried on my Z didnt work either, they had to grab another one.
Apparently each option on the car changes how the ECU is numbered or something like that. my car was a sport touring with leather and bose.

Very important --- BEFORE you sell your AP, make sure you uninstall it from your car! you have to go into the menu and click uninstall or it wont work on the next car.

I had that problem when i sold my evo.. luckily the guy that bought it brought it into the dealership and i got to uninstall it.

I also have a Cobb ap paper weight for sale also. Completely useless till the crack the vvel. good luck with the sale