Dallas: Bride x Cusco Zeta III Type-XL

tippZ · 11-20-2019, 01:05 PM

For sale in Dallas, TX:

Bride x Cusco Zeta III Type-XL (x1)
Street Faction Side Mount with Sliders (x1)

The seat is used, but barely. This is the XL version which should fit 36-38" waist. If local, you're welcome to come by and try it out. The seat is currently out of the car, but it's about a 10 minute process to throw it back in.

Seat is FIA certified, and valid until 06/2023. Purchased from Evasive Motorsports earlier this year.

The mounts are from street faction engineer, and do include sliders. I did not run the sliders, and they are not show in the pictures below.

I am willing to ship, but shipping expenses will be on the buyer.

Cash or paypal only.

Price: $1000 $850 Shipped & Paypal'd

OptionZero · 11-20-2019, 02:15 PM

can you tell if you were able to get it lower than stock height?

tippZ · 11-20-2019, 02:34 PM

It was probably an inch or so lower than stock but keep in mind that was without using the siders. So, if you needed the adjustability you probably wouldn't gain any clearance. I can put the seat in when I have some free time and take some measurements.

It is worth mentioning that with custom "L" brackets you could likely lower it significantly. There is a log of room on the brackets that could theoretically be removed.

NismoZ3409 · 11-20-2019, 04:57 PM

How was the installation? How was the driving feel with this after? What did you do to bypass the airbag light for the removed side airbag?

tippZ · 11-21-2019, 09:07 AM

Quote:

Originally Posted by NismoZ3409

How was the installation? How was the driving feel with this after? What did you do to bypass the airbag light for the removed side airbag?

Installation is easy. Since the bracked is in four pieces, and the base isn't connected, you need to line everything up in the car and then take it out and tighten it down. The seat keeps you planted and still offers decent leg movement. If you have never used a fixed bucket then getting in and out takes some getting used to. I did not install a resistor to trick the airbag light, but I am fairly certain it isn't hard to do.

JARblue · 11-21-2019, 09:52 AM

I wish I had seen this yesterday, when I was in Dallas

tippZ · 11-21-2019, 11:37 AM

Quote:

Originally Posted by JARblue

I wish I had seen this yesterday, when I was in Dallas

If you're back in the area just shoot me a PM! I work from home so I can meet up whenever.

Z Runner · 11-21-2019, 12:48 PM

TippZ can you review the seat a little? Why are you selling?
If you dont mined me asking what height and waist are you? Did seat fit you well?

tippZ · 11-21-2019, 04:08 PM

Quote:

Originally Posted by Z Runner

TippZ can you review the seat a little? Why are you selling?
If you dont mined me asking what height and waist are you? Did seat fit you well?

Seat holds you well... not sure how else you'd like me to review it. If you have any specific questions let me know. The seating position is comfortable and natural. I'm 6'3, 38" and it is tight on my hips. Went back to the OE seats.

tippZ · 11-23-2019, 03:46 PM

Bump.

tippZ · 11-27-2019, 03:20 PM

Bump.

DarkJak · 11-27-2019, 10:04 PM

For those interested, I have the Zeta III size regular and L and had the chance to sit in the Type XL at SEMA.

The regular Zetas will really only fit folks who are sub 34 waist sizes, and those at 34 will be a squeeze.

I'm around 34 now, and had a jacket and a belt on and the Type XL was very comfy, and had a bit of breathing room. Hold is fantastic, and the Cusco collab seats have a microsuedish type of fabric that feels MUCH nicer than the typical fuzzy fabric that Recaros and regular Brides have (what most race seats have). The fuzzy fabric is made of looped ends that really catch and hold on to anything. Like down from a puffer jacket for example. The fabric in the Cusco Brides are open ended and don't hold on to things as a result, making them far easier to clean.

Hold is excellent. Only thing I'd add for long trips would be a lumbar cushion for your lower back.

tippZ · 11-29-2019, 09:48 AM

Quote:

Originally Posted by DarkJak

For those interested, I have the Zeta III size regular and L and had the chance to sit in the Type XL at SEMA.

The regular Zetas will really only fit folks who are sub 34 waist sizes, and those at 34 will be a squeeze.

I'm around 34 now, and had a jacket and a belt on and the Type XL was very comfy, and had a bit of breathing room. Hold is fantastic, and the Cusco collab seats have a microsuedish type of fabric that feels MUCH nicer than the typical fuzzy fabric that Recaros and regular Brides have (what most race seats have). The fuzzy fabric is made of looped ends that really catch and hold on to anything. Like down from a puffer jacket for example. The fabric in the Cusco Brides are open ended and don't hold on to things as a result, making them far easier to clean.

Hold is excellent. Only thing I'd add for long trips would be a lumbar cushion for your lower back.

Thanks for review!

tippZ · 12-09-2019, 10:43 AM

Bump.

tippZ · 05-03-2020, 02:17 PM

Bump. Price lowered to $850 shipped.

11-20-2019, 01:05 PM	#1 (permalink)
tippZ Base Member Join Date: Mar 2017 Location: Dallas Posts: 71 Drives: 370Z Nismo Rep Power: 8	Dallas: Bride x Cusco Zeta III Type-XL For sale in Dallas, TX: Bride x Cusco Zeta III Type-XL (x1) Street Faction Side Mount with Sliders (x1) The seat is used, but barely. This is the XL version which should fit 36-38" waist. If local, you're welcome to come by and try it out. The seat is currently out of the car, but it's about a 10 minute process to throw it back in. Seat is FIA certified, and valid until 06/2023. Purchased from Evasive Motorsports earlier this year. The mounts are from street faction engineer, and do include sliders. I did not run the sliders, and they are not show in the pictures below. I am willing to ship, but shipping expenses will be on the buyer. Cash or paypal only. Price: $1000 $850 Shipped & Paypal'd 503.Zed likes this. Last edited by tippZ; 05-03-2020 at 02:17 PM.

11-20-2019, 02:15 PM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,159 Drives: 15 370Z Nismo 6MT Rep Power: 203226	can you tell if you were able to get it lower than stock height? Zezus likes this. __________________ OptionZero Build Thread

11-21-2019, 09:52 AM	#6 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I wish I had seen this yesterday, when I was in Dallas __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-21-2019, 12:48 PM	#8 (permalink)
Z Runner Enthusiast Member Join Date: Sep 2015 Location: Puerto Rico Posts: 331 Drives: 2016 370Z KAD M Base Rep Power: 26	TippZ can you review the seat a little? Why are you selling? If you dont mined me asking what height and waist are you? Did seat fit you well? Last edited by Trips; 11-27-2019 at 11:33 PM.

11-27-2019, 10:04 PM	#12 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	For those interested, I have the Zeta III size regular and L and had the chance to sit in the Type XL at SEMA. The regular Zetas will really only fit folks who are sub 34 waist sizes, and those at 34 will be a squeeze. I'm around 34 now, and had a jacket and a belt on and the Type XL was very comfy, and had a bit of breathing room. Hold is fantastic, and the Cusco collab seats have a microsuedish type of fabric that feels MUCH nicer than the typical fuzzy fabric that Recaros and regular Brides have (what most race seats have). The fuzzy fabric is made of looped ends that really catch and hold on to anything. Like down from a puffer jacket for example. The fabric in the Cusco Brides are open ended and don't hold on to things as a result, making them far easier to clean. Hold is excellent. Only thing I'd add for long trips would be a lumbar cushion for your lower back. tippZ likes this. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

11-20-2019, 02:34 PM	#3 (permalink)
tippZ Base Member Join Date: Mar 2017 Location: Dallas Posts: 71 Drives: 370Z Nismo Rep Power: 8	It was probably an inch or so lower than stock but keep in mind that was without using the siders. So, if you needed the adjustability you probably wouldn't gain any clearance. I can put the seat in when I have some free time and take some measurements. It is worth mentioning that with custom "L" brackets you could likely lower it significantly. There is a log of room on the brackets that could theoretically be removed.

11-20-2019, 04:57 PM	#4 (permalink)
NismoZ3409 Base Member Join Date: Apr 2017 Location: Illinois Posts: 42 Drives: Z34 Rep Power: 8	How was the installation? How was the driving feel with this after? What did you do to bypass the airbag light for the removed side airbag?

11-23-2019, 03:46 PM	#10 (permalink)
tippZ Base Member Join Date: Mar 2017 Location: Dallas Posts: 71 Drives: 370Z Nismo Rep Power: 8	Bump.

11-27-2019, 03:20 PM	#11 (permalink)
tippZ Base Member Join Date: Mar 2017 Location: Dallas Posts: 71 Drives: 370Z Nismo Rep Power: 8	Bump.

12-09-2019, 10:43 AM	#14 (permalink)
tippZ Base Member Join Date: Mar 2017 Location: Dallas Posts: 71 Drives: 370Z Nismo Rep Power: 8	Bump.

05-03-2020, 02:17 PM	#15 (permalink)
tippZ Base Member Join Date: Mar 2017 Location: Dallas Posts: 71 Drives: 370Z Nismo Rep Power: 8	Bump. Price lowered to $850 shipped.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Bride Zeta III Type-L - Gradation / FRP	ForceFed	Parts for sale (Private Classifieds)	4	09-10-2019 09:14 PM
Bride zeta II (ARE THESE REAL)?	Wonka2581	Exterior & Interior	9	03-28-2016 07:37 PM
[WTB] WTT BRIDE ZETA IIIs	Z_Society	Parts for sale (Private Classifieds)	0	10-08-2015 11:31 AM
[FOR SALE] Bride Zeta III with rails	rippedforce85	Parts for sale (Private Classifieds)	13	03-23-2015 11:44 PM
Bride Zeta 3 or Cusco Zeta 3 in CFRP	ckim64	Wanted	0	12-10-2014 03:02 PM