[Official] C7 Corvette Thread

KERMIT · 12-24-2012, 09:42 AM

Very nice! Thanks MC!

Mike · 12-24-2012, 09:51 AM

Taillights will probably kill it for me. Really have to see it in person though

b1adesofcha0s · 12-24-2012, 09:55 AM

How long before we will see an aftermarket rear bumper + tail light combo? We should just start designing one right now, we'd make so much money

m4a1mustang · 12-24-2012, 10:45 AM

Quote:

Originally Posted by b1adesofcha0s

How long before we will see an aftermarket rear bumper + tail light combo? We should just start designing one right now, we'd make so much money

b1adesofcha0s · 12-24-2012, 10:48 AM

All we'd really have to do is make round tail lights and replicate the factory bumper to fit them.

ImportConvert · 12-24-2012, 11:00 AM

Fix the interior and I'll buy a CPO in a year or two if they are gremlin free in a heartbeat!

ImportConvert · 12-24-2012, 11:02 AM

Quote:

Originally Posted by b1adesofcha0s

Maybe not, but you can spend that $20k difference in price to make the 5.0 outperform the C7.

Meh.

It still won't touch it.

It may handle as well, but it will ride like a log wagon. It may accelerate as hard, but it will get crap for mileage or be quirky (melt pistons).

I'm over modifying OEM vehicles.

b1adesofcha0s · 12-24-2012, 11:08 AM

Quote:

Originally Posted by ImportConvert

Meh.

It still won't touch it.

It may handle as well, but it will ride like a log wagon. It may accelerate as hard, but it will get crap for mileage or be quirky (melt pistons).

I'm over modifying OEM vehicles.

We won't know for sure until final details are revealed. I'm just getting started with modifying cars

Rui Z · 12-24-2012, 06:08 PM

I like how they went the LF-A route and did a digital RPM gauge.

Side profile looks good.

And yes 4 circular tail lights would have been better, but these square ones look nice as well

ImportConvert · 12-25-2012, 06:26 PM

Quote:

Originally Posted by b1adesofcha0s

We won't know for sure until final details are revealed. I'm just getting started with modifying cars

I tried to like modified stuff, but beyond a catback, or shocks/struts, I just can't get into it. It "unbalances" the factory package unless you have a LOT of money to dedicate to the project.

b1adesofcha0s · 12-25-2012, 08:23 PM

Yeah I've just done bolt ons, springs, and sways on the Z. Probably won't do too much more on my next car.

NeverBoneStck · 12-25-2012, 08:38 PM

It won't be that nice . Sure , the engine will rock but there will be tons of cheap plastic in the interior and same old corvette ******** .. C'mon , it's going to be 2013 and they still can't get it right ... I will pass ..

ImportConvert · 12-26-2012, 03:14 AM

Quote:

Originally Posted by NeverBoneStck

It won't be that nice . Sure , the engine will rock but there will be tons of cheap plastic in the interior and same old corvette ******** .. C'mon , it's going to be 2013 and they still can't get it right ... I will pass ..

The only issue I had with my Z06 was the interior. The handling dynamics were amazing compared to my 370Z Sport, and the transmission was much smoother. It was a much more precise suspension that somehow handled better on rough roads in corners, even with the run-flats. Obviously power wasn't an issue.

However, GM has come right out and admitted that the C6 interior was an embarrassment, and we know GM can make an interior (Cadillac CTS-V has a nice one, IMO.

I'm holding off on casting my stones until I see it.

Mike · 12-26-2012, 08:22 AM

I thought my C6 interior was as good as my 350z, and about on par with the 370. Maybe I'm just not too picky.

m4a1mustang · 12-26-2012, 08:25 AM

Quote:

Originally Posted by Mike

I thought my C6 interior was as good as my 350z, and about on par with the 370. Maybe I'm just not too picky.

I feel this way too. Materials are pretty good. It's just the design that is lacking... but that's largely subjective.

I, for one, find the 370Z's interior a bit tacky, albeit well made.

12-24-2012, 09:51 AM	#107 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	Taillights will probably kill it for me. Really have to see it in person though b1adesofcha0s likes this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

12-24-2012, 09:55 AM	#108 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	How long before we will see an aftermarket rear bumper + tail light combo? We should just start designing one right now, we'd make so much money __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

12-24-2012, 10:48 AM	#110 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	All we'd really have to do is make round tail lights and replicate the factory bumper to fit them. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

12-24-2012, 06:08 PM	#114 (permalink)
Rui Z Track Member Join Date: Feb 2010 Location: (.)(.) Posts: 931 Drives: 8====D Rep Power: 16	I like how they went the LF-A route and did a digital RPM gauge. Side profile looks good. And yes 4 circular tail lights would have been better, but these square ones look nice as well __________________

12-25-2012, 08:23 PM	#116 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Yeah I've just done bolt ons, springs, and sways on the Z. Probably won't do too much more on my next car. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

12-24-2012, 09:42 AM	#106 (permalink)
KERMIT Enthusiast Member Join Date: Apr 2012 Location: Republic of Wadiya Posts: 301 Drives: Ms. Daisy Rep Power: 13	Very nice! Thanks MC!

12-24-2012, 11:00 AM	#111 (permalink)
ImportConvert A True Z Fanatic Join Date: Jun 2010 Location: SWMO Posts: 4,454 Drives: 2019 CX5 GT Reserve Rep Power: 7626	Fix the interior and I'll buy a CPO in a year or two if they are gremlin free in a heartbeat!

12-25-2012, 08:38 PM	#117 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	It won't be that nice . Sure , the engine will rock but there will be tons of cheap plastic in the interior and same old corvette ******** .. C'mon , it's going to be 2013 and they still can't get it right ... I will pass .. __________________ Juiced! That is all you need to know !!

12-26-2012, 08:22 AM	#119 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	I thought my C6 interior was as good as my 350z, and about on par with the 370. Maybe I'm just not too picky. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official NBA Thread	nmjaxx9	Sports	949	07-13-2019 10:45 AM
Official What Are You Looking For Thread?	THMotorsports	THMotorsports	10	02-21-2017 06:24 PM
Official UFC Thread	b1adesofcha0s	Sports	985	08-11-2016 12:51 PM
Official Z33 to Z34 thread!	SmoothZ	Nissan 370Z General Discussions	64	11-17-2011 08:34 PM
Yet Another Corvette Thread.	ninous26	Other Vehicles	32	11-17-2010 11:56 AM