2001 BMW 7 series audio install

bigaudiofanat · 03-03-2010, 03:56 PM

Yes they are 3 ways, I hope this weekend I can start installing them. the tweeter and 4 inch mid already have a space in the door. The woofer however will be fiberglassed into the kick panel.

Today I got a little bit done, got another piece of the sub box fitted to the trunk, as it is not a straight forward square trunk it takes some time.

vipor · 03-03-2010, 04:48 PM

At least you won't have to work around trunk springs in this car

Kind of weird that the door speakers aren't bigger. Crazy aftermarket stereos.

Are you doing like 1/2 the trunk with the box or all of it?

bigaudiofanat · 03-03-2010, 04:55 PM

It is pretty much going to be the back board is going to be where the 2 12's are going to be. The new floor is 3 inches above from the old one allowing both amps to be flush mounted into it. Thus allowing a little more than half of the trunk space to remain. The other thing is the rear deck speakers will be removed totally and new ones installed in the rear doors where there is already pre existing ones.

bigaudiofanat · 03-07-2010, 07:01 PM

With other stuff going on I still was able to get the JL clean sweep in.

Started out taking the panels off.

Cat always lending a hand.

I HATE WIRE TAPS

Soldering all the wires

Wrapped the JL's wires up to clean up the look.

vipor · 03-07-2010, 07:39 PM

How much current is available from the factory amp wiring? How much does the JL pull?

bigaudiofanat · 03-07-2010, 07:57 PM

Not much at all, all the JL clean sweep does it analyze and clean the signal and drop it to low level for the new amps.

vipor · 03-07-2010, 08:02 PM

Ah cool I looked for it but couldn't find it. Nice looking product.

bigaudiofanat · 03-08-2010, 04:32 PM

Today i worked on the kick panels. The reason for this is there is no stock location for a 6.5 inch speaker in the door. Also this will help imaging a bit by having them facing the drive and passenger.

Drilled holes to help the fiberglass hold to the stock panel.

Laying down the foil and tape to protect the carpet.

Laying the cloth and resin

While that was curing I took off the door panel to take a look at the mid and tweeters.

The owner said that the speakers were upgraded but he did not know what they were. All that was upgraded was the tweeter.

Have to make a bracket to hold the smaller mid but will be well worth it.

The new tweeter

bigaudiofanat · 03-08-2010, 05:02 PM

Still waiting on the subs and amps. Speaker wire should be here tomorrow so I can at least get 2 of the 3 speakers installed in the front and the two in the rear doors.

bigaudiofanat · 03-09-2010, 03:51 PM

Today got a good deal done.

Dynamat was installed

Fedex and ups dropped off the reming stuff needed.

Ran the new speaker wire threw the doors.

Lube anyone?

bigaudiofanat · 03-09-2010, 03:52 PM

Fish wire slid pretty well

Trimmed the fiberglass will wrap it tomorrow

New rear speakers

bigaudiofanat · 03-09-2010, 03:56 PM

shabarivas · 03-09-2010, 04:07 PM

wow sick project matt - looks like you really love what you do ..

bigaudiofanat · 03-11-2010, 02:18 PM

Today I got a few things done even though it was raining.

One of the head rest tv's in.

Rear speaker in it's bazel.

Subs

Got the openings cut.

Box starting to come together

Sub box done "except for wrapping with cloth"

speedfreak28 · 03-11-2010, 02:45 PM

that box looks too big for those IDQ's, they dont like much more than 1 cubic ft. How come he went with the V2 IDQs? Be careful with that amp and those subs in a box that size.

03-03-2010, 03:56 PM	#16 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Yes they are 3 ways, I hope this weekend I can start installing them. the tweeter and 4 inch mid already have a space in the door. The woofer however will be fiberglassed into the kick panel. Today I got a little bit done, got another piece of the sub box fitted to the trunk, as it is not a straight forward square trunk it takes some time. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-03-2010, 04:48 PM	#17 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	At least you won't have to work around trunk springs in this car Kind of weird that the door speakers aren't bigger. Crazy aftermarket stereos. Are you doing like 1/2 the trunk with the box or all of it? __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

03-03-2010, 04:55 PM	#18 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	It is pretty much going to be the back board is going to be where the 2 12's are going to be. The new floor is 3 inches above from the old one allowing both amps to be flush mounted into it. Thus allowing a little more than half of the trunk space to remain. The other thing is the rear deck speakers will be removed totally and new ones installed in the rear doors where there is already pre existing ones. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-07-2010, 07:01 PM	#19 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	With other stuff going on I still was able to get the JL clean sweep in. Started out taking the panels off. Cat always lending a hand. I HATE WIRE TAPS Soldering all the wires Wrapped the JL's wires up to clean up the look. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-07-2010, 07:39 PM	#20 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	How much current is available from the factory amp wiring? How much does the JL pull? __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers Last edited by vipor; 03-07-2010 at 07:42 PM.

03-07-2010, 07:57 PM	#21 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Not much at all, all the JL clean sweep does it analyze and clean the signal and drop it to low level for the new amps. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-07-2010, 08:02 PM	#22 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	Ah cool I looked for it but couldn't find it. Nice looking product. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

03-08-2010, 04:32 PM	#23 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Today i worked on the kick panels. The reason for this is there is no stock location for a 6.5 inch speaker in the door. Also this will help imaging a bit by having them facing the drive and passenger. Drilled holes to help the fiberglass hold to the stock panel. Laying down the foil and tape to protect the carpet. Laying the cloth and resin While that was curing I took off the door panel to take a look at the mid and tweeters. The owner said that the speakers were upgraded but he did not know what they were. All that was upgraded was the tweeter. Have to make a bracket to hold the smaller mid but will be well worth it. The new tweeter __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-08-2010, 05:02 PM	#24 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Still waiting on the subs and amps. Speaker wire should be here tomorrow so I can at least get 2 of the 3 speakers installed in the front and the two in the rear doors. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-09-2010, 03:51 PM	#25 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Today got a good deal done. Dynamat was installed Fedex and ups dropped off the reming stuff needed. Ran the new speaker wire threw the doors. Lube anyone? __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-09-2010, 03:52 PM	#26 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Fish wire slid pretty well Trimmed the fiberglass will wrap it tomorrow New rear speakers __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-09-2010, 03:56 PM	#27 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	__________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-09-2010, 04:07 PM	#28 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	wow sick project matt - looks like you really love what you do ..

03-11-2010, 02:18 PM	#29 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Today I got a few things done even though it was raining. One of the head rest tv's in. Rear speaker in it's bazel. Subs Got the openings cut. Box starting to come together Sub box done "except for wrapping with cloth" __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-11-2010, 02:45 PM	#30 (permalink)
speedfreak28 Base Member Join Date: Jul 2009 Location: south jersey Posts: 247 Drives: 05 ram, 79 z28 Rep Power: 15	that box looks too big for those IDQ's, they dont like much more than 1 cubic ft. How come he went with the V2 IDQs? Be careful with that amp and those subs in a box that size. Last edited by speedfreak28; 03-11-2010 at 04:02 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audio install on my Z!	takimbe	Audio & Video	22	03-16-2011 04:47 PM
Audio Install	Graybullet	Audio & Video	18	11-02-2009 03:30 AM
Audio/Video Install in Florida	370book	Audio & Video	3	09-17-2009 07:24 AM
Audio - Install Labor Cost	355890	Audio & Video	7	03-25-2009 09:53 AM