Need Help? Let me know!

fairladyZ34 · 10-30-2012, 08:39 PM

pm'd

bigaudiofanat · 10-31-2012, 10:19 AM

Hello everyone, my name is Matt, I have been an installer for 8 years now. My audio installs is a part time side job, however I work as a I.T. guy. We got our new van a few weeks ago and the stock system was not cutting it for me.

Stage 1 Head unit install

I decided to go with something that could give me expandability and features but also not something that would blow the budget. The JVC KW-R900BT fit the bill nicely. I am a alpine guy all day and kenwood is a close runner up, but I decided to step out of my comfort zone on this one and go with a different brand all together.

On to the pictures.

Few of the parts

Ran the mic on top of the A pillar, no problem with echo or noise.

As I do all my work, I soldered and marine grade heat shrunk all the wires, sadly I was in a rush and did not take a picture of this.

Wires ready to go.

Routed the USB #2 port to the glove box, very simple to do.

Head unit installed in the metra dash kit.

Installed with trim ring

10-30-2012, 08:39 PM	#1 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 20	pm'd __________________ From Z to G to BMW and back to a G! Nismo for life

10-31-2012, 10:19 AM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 855	Hello everyone, my name is Matt, I have been an installer for 8 years now. My audio installs is a part time side job, however I work as a I.T. guy. We got our new van a few weeks ago and the stock system was not cutting it for me. Stage 1 Head unit install I decided to go with something that could give me expandability and features but also not something that would blow the budget. The JVC KW-R900BT fit the bill nicely. I am a alpine guy all day and kenwood is a close runner up, but I decided to step out of my comfort zone on this one and go with a different brand all together. On to the pictures. Few of the parts Ran the mic on top of the A pillar, no problem with echo or noise. As I do all my work, I soldered and marine grade heat shrunk all the wires, sadly I was in a rush and did not take a picture of this. Wires ready to go. Routed the USB #2 port to the glove box, very simple to do. Head unit installed in the metra dash kit. Installed with trim ring __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 10-31-2012 at 10:23 AM.