Need Help? Let me know!

bigaudiofanat · 01-07-2012, 10:58 PM

Solder and heat shrink connections

Rubber tape to wrap them all nice

Rear seats out

Battery ground upgrade

Factory mid location now home to tweeter. Not pretty but very strong. Gorilla epoxy

Sub wiring

bigaudiofanat · 01-07-2012, 10:58 PM

Subs ready

Most cables ran for tomorrow

MS8 home

bigaudiofanat · 01-11-2012, 12:49 PM

Ok got the owner to send me the pics, have some more to come so please be patient!!!

Trimmed the battery terminal cover to allow for the power wire to come out.

Work in progress pics of the power wire wake up wire and so on.

Organizing all the wires, zip tied every 6 inches or so. The two grommets towards the top of the rear seats provide great locations to run wires. NOTE make sure to cover them with some kind ot rubber rap and or shielding.

Labeled all the outputs for the amps as for quick reference.

Battery grounded, made sure there was no resistance for this ground.

Amps installed on new rack

Owner wanted easy access to his bass knob and radar

Wiring up all the power wires!!

Equinox · 01-11-2012, 06:59 PM

saa-wheat

cookZmonster · 01-12-2012, 12:39 AM

Great work Matt, not that I am surprised to see it

I am really looking forward to phase 2 of my own setup! I will be certain to take lots of pics this time..I promise! lol

Also.. great avatar pic

bigaudiofanat · 01-25-2012, 08:13 PM

Quote:

Originally Posted by Equinox

saa-wheat

Quote:

Originally Posted by cookZmonster

Great work Matt, not that I am surprised to see it

I am really looking forward to phase 2 of my own setup! I will be certain to take lots of pics this time..I promise! lol

Also.. great avatar pic

Thanks guys, he will be back for some fine tuning and some clean up. We got done at 12:30 Monday morning so I was beat.

cookzmonster looking forward to seeing you soon buddy.

bigaudiofanat · 03-01-2012, 12:26 PM

Bump to spring!!!

New website as well

bigAudioFanatic.com

bigaudiofanat · 03-09-2012, 05:45 PM

Can not remember off the top of my head. I know I measured the width of the opening and subtracted about a 1/2 inch

TommyL · 03-09-2012, 07:13 PM

thanks... but by the look of that pic... dont think my amps will fit like that... due to the JL jx360/4 and 500/1 slash 2 are bigger....

Vertigo · 03-11-2012, 03:32 PM

I visited Matt over the weekend to have my Kenwood double DIN installed, as well as JL component speakers for my 370. The job was done in a few hours and I left very happy that I decided to hit him up instead of a local stereo shop. Matt's prices are fair and on top of that, he's a personable guy that knows his stuff. I'll be giving him my repeat business for future projects.

Vertigo · 03-11-2012, 05:48 PM

Here is the install. Came out very nice IMO

bigaudiofanat · 03-21-2012, 02:03 PM

Thanks man hope your enjoying it.

Equinox · 03-22-2012, 05:10 PM

installed a double DIN DVD/Garmin unit in the Porsche and mounted the antenna as well as bluetooth mic. Yay for lilaudiofanat(me).

bigaudiofanat · 04-04-2012, 01:54 PM

Forget the model but it is the OEM face plate.

bigaudiofanat · 04-07-2012, 08:40 AM

Another 370z this one was revisited for upgrades

Custom speaker pods

Made the rings

Pulled the carpet off the panels

Started finding the right angle to mout the rings.

Starting to epoxy the supports

So far

01-07-2012, 10:58 PM	#1 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Solder and heat shrink connections Rubber tape to wrap them all nice Rear seats out Battery ground upgrade Factory mid location now home to tweeter. Not pretty but very strong. Gorilla epoxy Sub wiring __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-07-2012, 10:58 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Subs ready Most cables ran for tomorrow MS8 home __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-11-2012, 12:49 PM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Ok got the owner to send me the pics, have some more to come so please be patient!!! Trimmed the battery terminal cover to allow for the power wire to come out. Work in progress pics of the power wire wake up wire and so on. Organizing all the wires, zip tied every 6 inches or so. The two grommets towards the top of the rear seats provide great locations to run wires. NOTE make sure to cover them with some kind ot rubber rap and or shielding. Labeled all the outputs for the amps as for quick reference. Battery grounded, made sure there was no resistance for this ground. Amps installed on new rack Owner wanted easy access to his bass knob and radar Wiring up all the power wires!! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-11-2012, 06:59 PM	#4 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 19	saa-wheat __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD)

03-01-2012, 12:26 PM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Bump to spring!!! New website as well bigAudioFanatic.com __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

01-12-2012, 12:39 AM	#5 (permalink)
cookZmonster Base Member Join Date: May 2010 Location: West Virginia Posts: 39 Drives: 2010 40thAn 370Z Rep Power: 17	Great work Matt, not that I am surprised to see it I am really looking forward to phase 2 of my own setup! I will be certain to take lots of pics this time..I promise! lol Also.. great avatar pic

03-09-2012, 05:45 PM	#8 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Can not remember off the top of my head. I know I measured the width of the opening and subtracted about a 1/2 inch __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

03-09-2012, 07:13 PM	#9 (permalink)
TommyL Base Member Join Date: Jul 2010 Location: Chandler Posts: 50 Drives: fairlady Z34 Rep Power: 16	thanks... but by the look of that pic... dont think my amps will fit like that... due to the JL jx360/4 and 500/1 slash 2 are bigger....

03-11-2012, 03:32 PM	#10 (permalink)
Vertigo A True Z Fanatic Join Date: Dec 2011 Location: Philadelphia Posts: 15,476 Drives: 370z / R32 Rep Power: 222	I visited Matt over the weekend to have my Kenwood double DIN installed, as well as JL component speakers for my 370. The job was done in a few hours and I left very happy that I decided to hit him up instead of a local stereo shop. Matt's prices are fair and on top of that, he's a personable guy that knows his stuff. I'll be giving him my repeat business for future projects. Last edited by Vertigo; 03-11-2012 at 06:35 PM.

03-11-2012, 05:48 PM	#11 (permalink)
Vertigo A True Z Fanatic Join Date: Dec 2011 Location: Philadelphia Posts: 15,476 Drives: 370z / R32 Rep Power: 222	Here is the install. Came out very nice IMO Last edited by Vertigo; 03-11-2012 at 09:57 PM.

03-21-2012, 02:03 PM	#12 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Thanks man hope your enjoying it. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

04-04-2012, 01:54 PM	#14 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Forget the model but it is the OEM face plate. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

04-07-2012, 08:40 AM	#15 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 854	Another 370z this one was revisited for upgrades Custom speaker pods Made the rings Pulled the carpet off the panels Started finding the right angle to mout the rings. Starting to epoxy the supports So far __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode