Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs (http://www.the370z.com/nissan-370z-warranty-scheduled-maintenance-servicing-repairs/)
-   -   Help: Oil changes!!!! (http://www.the370z.com/nissan-370z-warranty-scheduled-maintenance-servicing-repairs/100095-help-oil-changes.html)

SouthArk370Z 01-22-2015 04:01 PM

Quote:

Originally Posted by Jsolo (Post 3089459)
Word to the wise, don't over torque the drain plug or double gasket the filter.

That sounds like the voice of experience. Hard won experience.

kenchan 01-22-2015 04:03 PM

Quote:

Originally Posted by Jsolo (Post 3089459)
Word to the wise, don't over torque the drain plug or double gasket the filter.

lol'ed @ double gasket the filter

Jsolo 01-22-2015 04:13 PM

^^LOL.. Nope, never bitten by these myself but remember the choice words from the instructor when one kid did both to the same car back in HS. That was some decades ago... Best lessons are those learned at someone else's expense. :)

kenchan 01-22-2015 04:19 PM

yah, i do check just in case though, when i remove the oil filter to make sure the o-ring is still on the filter and not left on the engine. haha

Spooler 01-22-2015 10:24 PM

Quote:

Originally Posted by kenchan (Post 3089486)
yah, i do check just in case though, when i remove the oil filter to make sure the o-ring is still on the filter and not left on the engine. haha

Best practice is to wipe the oil filter matting surface just in case the person
before you double gasket it. :eek:

Limeybastard 02-19-2015 03:29 AM

I did a write up on my first oil change on here somewhere.

So true about over tighting the sump drain plug, after over tightening my BMW once back in the UK I always just hand tight then a quart turn.

The last time I changed my oil in my Z was last week, I actually under tightened the oil filter as there was some oil weeping out of it. No biggie as not much oil was lost. I just use my hands to tighten the oil filter. Makes it so much easier to remove next time around.

Haters gonna hate, I used Mobil 1 0-40 euro spec again this time ;-)

Dreadnaught 02-19-2015 11:17 PM

^ I hand tighten my oil filter until it nice and snug then turn it just a tad more. I also torque my drain bolt to 29 foot lbs as stated in the manual.


All times are GMT -5. The time now is 04:47 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2