Anyone having issues with top liner?

Ubetit · 04-10-2013, 10:03 AM

I'll take some pics tonight but just above the window on each side i have an issue. One side actually has a hole in it. If i put the top half way down I notice there are many sharp things along the path that the liner takes when going up and down. A few of them are wire ties and the cut ends are sharp. I've put electrical tape on some of that stuff but it doesn't seem to stay in place.

bvl · 04-11-2013, 09:26 AM

Quote:

Originally Posted by Ubetit

I'll take some pics tonight but just above the window on each side i have an issue. One side actually has a hole in it. If i put the top half way down I notice there are many sharp things along the path that the liner takes when going up and down. A few of them are wire ties and the cut ends are sharp. I've put electrical tape on some of that stuff but it doesn't seem to stay in place.

On the drivers side of ours, you can see the soft material hook on a wire tie end from one of the hydraulic motors as the top closes. It hooks on, then pops over it just as the top closes. Its creating a slight wear mark for sure and I am looking to soften its journey this spring (rotate wire tie, perhaps some electrical tape to smooth it over but that can be challenging to adhere depending on location). Sounds like you are seeing something similar.

- b

Ubetit · 04-12-2013, 09:52 AM

That's exactly what happened to mine. I rotated the wire tie last fall but i guess the damage had already been done.

gr8-wrx · 04-12-2013, 10:15 AM

Is the issue near a seam? Just curious...

Ubetit · 04-12-2013, 05:23 PM

^ Nope

Ubetit · 06-24-2013, 07:22 PM

Dealership is going to replace my top whenever I want before my warranty is up next May. No reason to get it replaced yet as the hole is on the inside liner.

04-10-2013, 10:03 AM	#1 (permalink)
Ubetit Track Member Join Date: May 2012 Location: Ohio Posts: 527 Drives: the women lazy Rep Power: 13	Anyone having issues with top liner? I'll take some pics tonight but just above the window on each side i have an issue. One side actually has a hole in it. If i put the top half way down I notice there are many sharp things along the path that the liner takes when going up and down. A few of them are wire ties and the cut ends are sharp. I've put electrical tape on some of that stuff but it doesn't seem to stay in place.

04-12-2013, 10:15 AM	#4 (permalink)
gr8-wrx Track Member Join Date: Apr 2011 Location: Nor Cal Posts: 607 Drives: 10 370z Roadster 7AT Rep Power: 15	Is the issue near a seam? Just curious... __________________ Me: 2022 Toyota Tacoma SR5 Double-Cab SB, 2023 Toyota Corolla Wifey: 2013 Toyota Highlander Limited AWD Weekends: 2010 Nissan 370z Roadster

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Cargo Liner, Yes, No, or Other?	Bonzo	Exterior & Interior	12	10-21-2013 01:18 PM
Fender Liner Compatability	gurneyeagle	Exterior & Interior	0	08-01-2012 05:34 PM
fender liner issue	Xsad	Exterior & Interior	3	11-30-2011 05:10 PM
Fender Liner Removal?	blinkme323	DIY Section (Do-It-Yourself)	1	02-01-2010 06:32 AM
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ??	Christopher	Nissan 370Z General Discussions	19	10-16-2009 03:55 PM

04-12-2013, 09:52 AM	#3 (permalink)
Ubetit Track Member Join Date: May 2012 Location: Ohio Posts: 527 Drives: the women lazy Rep Power: 13	That's exactly what happened to mine. I rotated the wire tie last fall but i guess the damage had already been done.

04-12-2013, 05:23 PM	#5 (permalink)
Ubetit Track Member Join Date: May 2012 Location: Ohio Posts: 527 Drives: the women lazy Rep Power: 13	^ Nope

06-24-2013, 07:22 PM	#6 (permalink)
Ubetit Track Member Join Date: May 2012 Location: Ohio Posts: 527 Drives: the women lazy Rep Power: 13	Dealership is going to replace my top whenever I want before my warranty is up next May. No reason to get it replaced yet as the hole is on the inside liner.