Pop up Engine Hood indicator

jaze55 · 11-08-2013, 10:39 PM

Many members in Australia have experienced the same issue. It happens when you turn the car on and the 3 front impact sensors are still disconnected i.e. when you install an oil cooler and check for leaks with the bumper removed and sensors disconnected or install intakes which require bumper removal.

You are in luck as there is a simple procedure to follow to turn the light off. I have done it successfully twice now.

http://uprev.com/documentation/Popup%20Hood%20Reset.png

Trips · 11-08-2013, 10:47 PM

Quote:

Originally Posted by jaze55

Many members in Australia have experienced the same issue. It happens when you turn the car on and the 3 front impact sensors are still disconnected i.e. when you install an oil cooler and check for leaks with the bumper removed and sensors disconnected or install intakes which require bumper removal.

You are in luck as there is a simple procedure to follow to turn the light off. I have done it successfully twice now.

http://uprev.com/documentation/Popup%20Hood%20Reset.png

THANK YOU for sharing

axmea? · 11-09-2013, 07:54 AM

Quote:

Originally Posted by jaze55

Many members in Australia have experienced the same issue. It happens when you turn the car on and the 3 front impact sensors are still disconnected i.e. when you install an oil cooler and check for leaks with the bumper removed and sensors disconnected or install intakes which require bumper removal.

You are in luck as there is a simple procedure to follow to turn the light off. I have done it successfully twice now.

http://uprev.com/documentation/Popup%20Hood%20Reset.png

Thanks. I saved this. It could come in handy someday.

11-08-2013, 10:39 PM	#1 (permalink)
jaze55 Base Member Join Date: Jun 2010 Location: Sydney Posts: 30 Drives: MY10 370Z 6M Rep Power: 17	Many members in Australia have experienced the same issue. It happens when you turn the car on and the 3 front impact sensors are still disconnected i.e. when you install an oil cooler and check for leaks with the bumper removed and sensors disconnected or install intakes which require bumper removal. You are in luck as there is a simple procedure to follow to turn the light off. I have done it successfully twice now. http://uprev.com/documentation/Popup%20Hood%20Reset.png SouthArk370Z, Bummer, jlo370z and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pop-up engine hood indicator~~need help	niznizbobo	Engine & Drivetrain	3	06-18-2011 11:37 AM
Pop up Engine Hood indicator - After bumper removal	AH370Z	Nissan 370Z General Discussions	15	06-13-2011 11:01 AM
3M DiNoc Carbon Fiber Wrap for engine hood how much?	2ndChance	Exterior & Interior	4	04-14-2011 10:26 AM
Aftermarket engine hood	355890	Exterior & Interior	14	10-18-2009 06:53 PM