|
Hey guys, Note: the wires to the back of the mirrors have to soldered and routed through the harness conduit to the first connector. There you will find only 3
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
12-07-2011, 04:44 PM
|
#10 (permalink) |
|
Base Member
Join Date: Jan 2010
Location: Illinois
Posts: 40
Drives: 09 nissan 370z
Rep Power: 10140   |
Hey guys, Note: the wires to the back of the mirrors have to soldered and routed through the harness conduit to the first connector. There you will find only 3 pins, you need to add 2 pins # 4 which is the power pin and # 8 is the ground pin at connector "D3" . The door harness side you need to add POWER PIN # 44 on connector "D1" to PIN # 4 on connector "D3". The ground pin # 13 is already there at connector "D1", so you will have to take the wire from pin # 8 from connector "D3" run it through the conduit to connector "D1" and splice it to pin # 13. This is for the drivers side mirror.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| heated mirrors | cheese | Exterior & Interior | 9 | 04-30-2011 03:55 PM |
| Question about the heated mirrors | MY1STZ | Exterior & Interior | 2 | 11-19-2010 07:57 PM |
| Heated Mirrors? | Mr Foxwolf | Exterior & Interior | 3 | 05-20-2010 02:13 PM |
| Is 2009 heated mirrors install possible? | NewYorkJon34 | Exterior & Interior | 2 | 08-23-2009 09:26 PM |
| Heated Side Mirrors | spearfish25 | DIY Section (Do-It-Yourself) | 2 | 05-24-2009 09:30 PM |
3Likes
Threaded Mode
