Nissan 370Z Forum - View Single Post

Javier · 12-07-2011, 04:44 PM

Hey guys, Note: the wires to the back of the mirrors have to soldered and routed through the harness conduit to the first connector. There you will find only 3 pins, you need to add 2 pins # 4 which is the power pin and # 8 is the ground pin at connector "D3" . The door harness side you need to add POWER PIN # 44 on connector "D1" to PIN # 4 on connector "D3". The ground pin # 13 is already there at connector "D1", so you will have to take the wire from pin # 8 from connector "D3" run it through the conduit to connector "D1" and splice it to pin # 13. This is for the drivers side mirror.

12-07-2011, 04:44 PM	#9 (permalink)
Javier Base Member Join Date: Jan 2010 Location: Illinois Posts: 40 Drives: 09 nissan 370z Rep Power: 10138	Hey guys, Note: the wires to the back of the mirrors have to soldered and routed through the harness conduit to the first connector. There you will find only 3 pins, you need to add 2 pins # 4 which is the power pin and # 8 is the ground pin at connector "D3" . The door harness side you need to add POWER PIN # 44 on connector "D1" to PIN # 4 on connector "D3". The ground pin # 13 is already there at connector "D1", so you will have to take the wire from pin # 8 from connector "D3" run it through the conduit to connector "D1" and splice it to pin # 13. This is for the drivers side mirror.