Nissan 370Z Illuminated Door Kick Plates Installation Instructions

AK370Z · 02-12-2009, 11:28 PM

Courtesy of Z1Motorsports.com

Source: Z1motorsports :: Illuminated Door Sills

brakedrift12 · 04-05-2010, 08:30 PM

i got a question. does the z that has illuminated kick plates already also come with the wires works as i see on the paper above? or the one that already comes with the illuminated plate has like more clean wire works done? I mean, is it possible to determine which was built with the illuminated plate or not?

vipor · 04-05-2010, 11:51 PM

Evidently it appears that the illuminated kickplates were only designed to be an addon. The cars that "come with them" should have the same jumper/splice harness in them, not a different body harness alltogether.

phonesystem · 04-18-2010, 09:27 PM

Quote:

Originally Posted by vipor

Evidently it appears that the illuminated kickplates were only designed to be an addon. The cars that "come with them" should have the same jumper/splice harness in them, not a different body harness alltogether.

yes thanks for your comment. i will come back to see

Diocletian · 04-25-2010, 03:43 PM

Im trying to disconnect the connector from the BCM shown in Picture 10 Fig 4 and I can't seem to do it. There's no place to grip the connector to safely pull on the plug to release it. I tried to move the clip to help it loose of course but it's not budging.

Does someone have a pic of it being removed? Or even have a technique to remove it?

Diocletian · 04-25-2010, 10:20 PM

Should have posted this earlier but shortly after my last post I was able to remove the plug needed. The kickplates are in and working fine, nice touch to the interior.

02-12-2009, 11:28 PM	#1 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Nissan 370Z Illuminated Door Kick Plates Installation Instructions Courtesy of Z1Motorsports.com Source: Z1motorsports :: Illuminated Door Sills __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

04-05-2010, 11:51 PM	#3 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	Evidently it appears that the illuminated kickplates were only designed to be an addon. The cars that "come with them" should have the same jumper/splice harness in them, not a different body harness alltogether. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

04-25-2010, 03:43 PM	#5 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	Im trying to disconnect the connector from the BCM shown in Picture 10 Fig 4 and I can't seem to do it. There's no place to grip the connector to safely pull on the plug to release it. I tried to move the clip to help it loose of course but it's not budging. Does someone have a pic of it being removed? Or even have a technique to remove it? __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

04-25-2010, 10:20 PM	#6 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	Should have posted this earlier but shortly after my last post I was able to remove the plug needed. The kickplates are in and working fine, nice touch to the interior. __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Blinder installation and radar detector hardwire	semtex	DIY Section (Do-It-Yourself)	65	07-29-2012 07:49 PM
370z Illuminated Kick Plates	Educ8r	Nissan 370Z General Discussions	93	07-19-2009 12:58 PM
Interior Door Panel on Base differs from Touring?	The Geek	Nissan 370Z General Discussions	21	01-13-2009 09:28 PM
Illuminated Kick Panels?	Crash	Nissan 370Z General Discussions	9	01-03-2009 01:44 PM
Nissan 370Z Illuminated Kick Plates?	shizzawha	Nissan 370Z General Discussions	1	11-26-2008 10:04 PM

04-05-2010, 08:30 PM	#2 (permalink)
brakedrift12 Enthusiast Member Join Date: Dec 2009 Location: virginia Posts: 266 Drives: 10 Nissan 370z 4G M6 Rep Power: 15	i got a question. does the z that has illuminated kick plates already also come with the wires works as i see on the paper above? or the one that already comes with the illuminated plate has like more clean wire works done? I mean, is it possible to determine which was built with the illuminated plate or not?