What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

mishuko · 11-11-2015, 09:45 AM

Using the Z as a chauffeur for my mom.

Quote from her "I like how you don't make the car go *juggajuggajuga* anymore"

Lol thanks mom.... would hope I could drive more smoothly after a year hahaha

HulaGirl · 11-11-2015, 04:43 PM

Quote:

Originally Posted by mishuko

Using the Z as a chauffeur for my mom.

Quote from her "I like how you don't make the car go *juggajuggajuga* anymore"

Lol thanks mom.... would hope I could drive more smoothly after a year hahaha

Good one mom!!

D.Stillwell · 11-13-2015, 05:36 AM

Quote:

Originally Posted by HulaGirl

Good one mom!!

My dad got a ride in the Z, during which point he told me that my grandpa's 1970 Fiat with 4speed and 90hp was smoother shifting.

Some people, you give em ride in sports car and they crap on it. Haha

Sent from my SM-G860P using Tapatalk

Christothep · 11-11-2015, 08:25 PM

Just received my EBC slotted rotors and red stuff pads. Hopefully installing soon!

carlitos_370z · 11-12-2015, 12:41 PM

Quote:

Originally Posted by Christothep

Just received my EBC slotted rotors and red stuff pads. Hopefully installing soon!

nice!!! i have my EBC USR Slotted rotors in my house about two months ago loooool! still have to buy the brake pads

D.Stillwell · 11-12-2015, 12:29 PM

UpRev tuned. Made 304whp with just Stillen intake and exhaust.

Baseline was 289whp with just the mods, before the tune. So I figure the mods gained ~9whp with no tune since most stock Z's dyno ~280whp.

Sent from my SM-G860P using Tapatalk

onzedge · 11-13-2015, 04:21 PM

New plates...

JARblue · 11-13-2015, 05:20 PM

Quote:

Originally Posted by onzedge

New plates...

I figured you were actually serious ... they look good

b15 · 11-13-2015, 05:15 PM

Changed the oil today. Will keep her out through the weekend and hopefully weather permits a detail before I put her in storage. If not, then she'll go to sleep dirty

Davey · 11-13-2015, 05:38 PM

The hell is wrong with the forum today?

Davey · 11-13-2015, 05:38 PM

Pages only load halfway most of the time, if they even load... Every other site works fine.

pokeyl · 11-13-2015, 07:07 PM

XP-10/Front XP-8/Rear Brake Pads, Stillen Sway Bars, pulled the crap BC-ER leaking coilovers, put the HKS Hypermax III back on. Results were outstanding. This happened over the last few days as my car is a DD.

need4speed255 · 11-14-2015, 09:39 AM

Quote:

Originally Posted by Davey

Pages only load halfway most of the time, if they even load... Every other site works fine.

I am having the same problem too. I usually notice it in the evening. I am glad it's not just me. I posted the same question in the "feedback and questions" section.

Davey · 11-14-2015, 09:46 AM

It seems to be better today... I wonder if the server is just overloaded.

/off topic

Jinx101 · 11-14-2015, 10:36 PM

Finally got around to replacing the CSC. My cousin (mechanic) actually did the work..I supervised.

Replaced every thing from the Master Cylinder to the flywheel and MAN, what a difference! Goodbye soggy pedal feel! The JWT flywheel is really chatty but doesn't bother me too much. Only bad thing was the damn shift knob was insanely hard to get off. Ended up pulling the leather cover off.

Oh well, inspiration to get a new knob now. Here's the culprit!!

11-13-2015, 04:21 PM	#7 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684737	New plates... __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

11-13-2015, 07:07 PM	#12 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	XP-10/Front XP-8/Rear Brake Pads, Stillen Sway Bars, pulled the crap BC-ER leaking coilovers, put the HKS Hypermax III back on. Results were outstanding. This happened over the last few days as my car is a DD. __________________ It's not my fault I'm old, I was born a very long time ago!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

11-11-2015, 09:45 AM	#1 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	Using the Z as a chauffeur for my mom. Quote from her "I like how you don't make the car go juggajuggajuga anymore" Lol thanks mom.... would hope I could drive more smoothly after a year hahaha

11-11-2015, 08:25 PM	#4 (permalink)
Christothep Base Member Join Date: Nov 2013 Location: Jacksonville Posts: 30 Drives: 2016 370 NISMO Rep Power: 12	Just received my EBC slotted rotors and red stuff pads. Hopefully installing soon!

11-12-2015, 12:29 PM	#6 (permalink)
D.Stillwell Enthusiast Member Join Date: Sep 2015 Location: Snakeden Branch, VA Posts: 396 Drives: Fairlady Z34/6MT Rep Power: 19	UpRev tuned. Made 304whp with just Stillen intake and exhaust. Baseline was 289whp with just the mods, before the tune. So I figure the mods gained ~9whp with no tune since most stock Z's dyno ~280whp. Sent from my SM-G860P using Tapatalk

11-13-2015, 05:15 PM	#9 (permalink)
b15 A True Z Fanatic Join Date: Feb 2010 Location: Chicago Posts: 3,229 Drives: 4drz Rep Power: 36572	Changed the oil today. Will keep her out through the weekend and hopefully weather permits a detail before I put her in storage. If not, then she'll go to sleep dirty

11-13-2015, 05:38 PM	#10 (permalink)
Davey A True Z Fanatic Join Date: Apr 2011 Location: Indiana Posts: 3,766 Drives: '15 NISMO 6MT Rep Power: 117172	The hell is wrong with the forum today?

11-13-2015, 05:38 PM	#11 (permalink)
Davey A True Z Fanatic Join Date: Apr 2011 Location: Indiana Posts: 3,766 Drives: '15 NISMO 6MT Rep Power: 117172	Pages only load halfway most of the time, if they even load... Every other site works fine.

11-14-2015, 09:46 AM	#14 (permalink)
Davey A True Z Fanatic Join Date: Apr 2011 Location: Indiana Posts: 3,766 Drives: '15 NISMO 6MT Rep Power: 117172	It seems to be better today... I wonder if the server is just overloaded. /off topic

11-14-2015, 10:36 PM	#15 (permalink)
Jinx101 Premium Member Join Date: Feb 2015 Location: Maryland Posts: 55 Drives: 10 40th 370Z #17 Rep Power: 11	Finally got around to replacing the CSC. My cousin (mechanic) actually did the work..I supervised. Replaced every thing from the Master Cylinder to the flywheel and MAN, what a difference! Goodbye soggy pedal feel! The JWT flywheel is really chatty but doesn't bother me too much. Only bad thing was the damn shift knob was insanely hard to get off. Ended up pulling the leather cover off. Oh well, inspiration to get a new knob now. Here's the culprit!!