What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

Spooler · 05-08-2016, 12:30 PM

Quote:

Originally Posted by jchammond

Anybody had this happen; this is R/R tire w/40 psi air,,,did one 15mph roll start & it hooked up....notice valve stem dot.

Sent from my iPhone using Tapatalk

Did they install that valve stem in backwards? What the heck did they do. That doesn't look like a valve stem cap.

jchammond · 05-08-2016, 03:21 PM

I do all of my repairs/including tire mounting & balancing....wheels spun inside of tires,about 3" on each side.

barncobob · 05-08-2016, 03:23 PM

that yellow dot on tire should line up with the valve stem.....im thinking u spun the tire too hard after install, take few hundred miles to get the tire/rim married together

jchammond · 05-08-2016, 03:29 PM

Quote:

Originally Posted by barncobob

that yellow dot on tire should line up with the valve stem.....im thinking u spun the tire too hard after install, take few hundred miles to get the tire/rim married together

yes,they were lined up,,,only used a bit of Murphy's tire soap & still had to bout break tire changer from floor to twist the tire to exact spot....drove on them 40miles with 40 psi air & made 1 15mph roll start from 1st-2nd gear....felt no wheel spin at all.
These tires are 32lbs. The Goodyears weighed in at 28
Both sides turned equal amounts/Thank's to my new Quaife

sgosh · 05-08-2016, 05:17 PM

Gutted the hatch, and installed sound-insulating material (5mm rubber material used for underneath laminate flooring)!

The reduction in road-noise is noticeable.

mishuko · 05-08-2016, 05:49 PM

Quote:

Originally Posted by sgosh

Gutted the hatch, and installed sound-insulating material (5mm rubber material used for underneath laminate flooring)!

The reduction in road-noise is noticeable.

did you also do the rear wall, little bump part both sides and on top of the wheel wells?

also you should consider the door panals. very easy to do!

Leingod · 05-09-2016, 07:24 AM

I'm getting nervous/excited for the Swift spring install this Saturday. Looking at how-to videos and the forum like crazy. Really don't want to mess this up badly.

Wheels3309 · 05-09-2016, 08:23 AM

Quote:

Originally Posted by Leingod

I'm getting nervous/excited for the Swift spring install this Saturday. Looking at how-to videos and the forum like crazy. Really don't want to mess this up badly.

hey did you end up making the drive to Buff to get the exhaust??

Nice sunny day today, and I'm on vacation this week, so I think the wife & I are gonna take a little trip on some backroads through the finger lakes in the Z... Grab some lunch and head back!

b15 · 05-09-2016, 09:06 AM

Quote:

Originally Posted by Leingod

I'm getting nervous/excited for the Swift spring install this Saturday. Looking at how-to videos and the forum like crazy. Really don't want to mess this up badly.

You'll be fine. It's ridiculously easy, given you have the right tools. And beer.

DeliriousClam · 05-09-2016, 09:09 AM

Quote:

Originally Posted by Leingod

I'm getting nervous/excited for the Swift spring install this Saturday. Looking at how-to videos and the forum like crazy. Really don't want to mess this up badly.

I'll be honest the hardest part was using the spring compressor. And that was more stressful than difficult

Leingod · 05-09-2016, 09:38 AM

Quote:

Originally Posted by Wheels3309

hey did you end up making the drive to Buff to get the exhaust??

Nice sunny day today, and I'm on vacation this week, so I think the wife & I are gonna take a little trip on some backroads through the finger lakes in the Z... Grab some lunch and head back!

He's shipping it to me thankfully. No idea when though. That'll be an hr tops to install. How's your Top Speed exhaust? I want to hear it Saturday!!!

And be sure to stop at a few wineries also hahahaha

Quote:

Originally Posted by b15

You'll be fine. It's ridiculously easy, given you have the right tools. And beer.

Beer is easy. Tools might be a different story. Hopefully we can get our hands on an air compressor and some power tools.

Quote:

Originally Posted by DeliriousClam

I'll be honest the hardest part was using the spring compressor. And that was more stressful than difficult

Stressful? I'm just paranoid it'll decompress into my face or something.

DeliriousClam · 05-09-2016, 01:11 PM

Quote:

Originally Posted by Leingod

He's shipping it to me thankfully. No idea when though. That'll be an hr tops to install. How's your Top Speed exhaust? I want to hear it Saturday!!!

And be sure to stop at a few wineries also hahahaha

Beer is easy. Tools might be a different story. Hopefully we can get our hands on an air compressor and some power tools.

Stressful? I'm just paranoid it'll decompress into my face or something.

Exactly why it was stressful

Leingod · 05-09-2016, 01:13 PM

Quote:

Originally Posted by DeliriousClam

Exactly why it was stressful

Yea.... You're making me feel super confident....

DeliriousClam · 05-09-2016, 02:13 PM

Quote:

Originally Posted by Leingod

Yea.... You're making me feel super confident....

I was holding the strut in a vice that was held to a small metal table with C-clamps AND used an impact gun to compress the spring (super retarded) and managed to not get a spring through the brain. You'll be fine.

imjello · 05-09-2016, 03:32 PM

Quote:

Originally Posted by Leingod

Yea.... You're making me feel super confident....

https://www.youtube.com/watch?v=kY56ib3I-ew

05-08-2016, 03:21 PM	#7112 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	I do all of my repairs/including tire mounting & balancing....wheels spun inside of tires,about 3" on each side. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

05-08-2016, 03:23 PM	#7113 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 589	that yellow dot on tire should line up with the valve stem.....im thinking u spun the tire too hard after install, take few hundred miles to get the tire/rim married together jchammond likes this.

05-09-2016, 07:24 AM	#7117 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	I'm getting nervous/excited for the Swift spring install this Saturday. Looking at how-to videos and the forum like crazy. Really don't want to mess this up badly. Memphis370Z and Wheels3309 like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM