What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)

kenchan · 03-02-2016, 12:39 PM

probably want to make or get a finisher for dat knob to make it more complete.

njobe89 · 03-02-2016, 01:45 PM

Quote:

Originally Posted by mishuko

well I wish more mileage upon your block!!!!!

it was LOOKING good and then turned for the worst. but again looking bright again. apparently we broke the 'record' for snowfall on march 1 yesterday lol.

about 5 inches of snow in the city. on the bright side the cleaners actually did their job fairly well this time.

lol i drive my car everyday, in 2 years i have 44k miles

Quote:

Originally Posted by Leingod

I don't feel as bad anymore. The itch to drive is insane. The itch to install all the stuff I am ordering is even worse!

INGS+1 Rep Lip
OEM Spoiler with N-Type add-on
20/25MM Spacers
3 new shift knobs to play with
And now looking at some CAI's. A little hesitant though sicne finding a tuner in CNY is damn near impossible.

sicne?
but you don't need to tune your car after you just install intakes. so you can get intakes.

Quote:

Originally Posted by Leingod

oooo, so it's a whole overlay across the rear. And sicne when do Z's come with rear windshield wipers now? 0_o

sicne? lol
i believe european Z's and japanese models come with the rear wipers

Quote:

Originally Posted by kenchan

oh, dat was just photoshopped.. lol

not photoshopped chanken

berrydingle · 03-02-2016, 08:14 PM

Quote:

Originally Posted by kenchan

probably want to make or get a finisher for dat knob to make it more complete.

Already did from Zeetoys! In the mail by now!

onzedge · 03-02-2016, 08:55 PM

Quote:

Originally Posted by berrydingle

Already did from Zeetoys! In the mail by now!

Your user name is quite interesting.

Z_ealot · 03-02-2016, 09:00 PM

Quote:

Originally Posted by kenchan

probably want to make or get a finisher for dat knob to make it more complete.

Is the finisher the part that covers up the nasty skinny looking stick that the knob screws down on to? Just wondering cause i was actually looking for something since i also changed my shift knob lol

mishuko · 03-03-2016, 08:11 AM

looking at the 14-day forecast for the weather. next week has a LOT of rain midweek with nice double digit temps!

I MIGHT be able to bring her out in about 2 weeks assuming the temps stay above 0 and no snow in the forecast!

oh and started inquiring about a tune to compare ecutek/uprev prices (or availability in my case). time to clean up my AFR and get rid of that throttle lag!

imjello · 03-03-2016, 09:12 AM

Y'all are missing out on all the cheap premium gas, paid $1.70ish the other day, and just combusted it without a care in the world

kenchan · 03-03-2016, 11:15 AM

Quote:

Originally Posted by Z_ealot

Is the finisher the part that covers up the nasty skinny looking stick that the knob screws down on to? Just wondering cause i was actually looking for something since i also changed my shift knob lol

to cover the shaft u need to make a spacer inside the boot to keep the top of the boot from sliding down the shaft. i have a bunch of these plastic collars dat came with my wireshelves as packing material to separate the shelves during shipping. those work great for this purpose.

the finisher is to make the knob appear more fluid to the boot, and to cover the factory boot's creased top from the stock knob. you see a creased ring around bdingo's boot just under the knob. that looks unfinished.. well, at least to me. he apparently bought a finisher for it.

i made mine out of a ballcock shank washer. its my favorite homedepot mod..

JSur · 03-03-2016, 11:33 AM

Ordered parts to replace banjo connector on driver side turbo and clutch slave

11' 370z TT

mishuko · 03-03-2016, 12:19 PM

csc/msc/oil change = booked

tune = booked

insurance = pending to be active again

berrydingle · 03-03-2016, 05:25 PM

Ordered GTR Start button and did mine just now! Took 2 minutes, literally.

A.Alva · 03-03-2016, 06:04 PM

I dropped off my Z to get a clear bra for the front end and also to get limo tint on all the windows and a sun strip

Z in the 6 · 03-03-2016, 07:52 PM

Drove it and priced out a stock to nismo exhaust conversion through a local dealer

Z_ealot · 03-03-2016, 07:55 PM

Quote:

Originally Posted by A.Alva

I dropped off my Z to get a clear bra for the front end and also to get limo tint on all the windows and a sun strip

You wouldn't happen to drive a gunmetal color Z would you?

D.Stillwell · 03-03-2016, 08:04 PM

Quote:

Originally Posted by berrydingle

Ordered GTR Start button and did mine just now! Took 2 minutes, literally.

Sweet. I've been looking at doing that as a quick and not expensive mod. How does the stock start button come out? Is it really that easy?

In other news I covered up Z again for the forcasted snow tonight. Then tomorrow it should be fine again...man am I ever tired of this March weather.

But I have been able to get thru winter just with a good cover and driving it in between all the storms, wash all the time to get salt off, and I did treat my underbody with 3M rust proof/sound deadener spray...

6 months of ownership, 11500k miles, oil change coming up (every 3k), bought with 6 miles =

03-03-2016, 12:19 PM	#6520 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9434	csc/msc/oil change = booked tune = booked insurance = pending to be active again Ghostvette, Memphis370Z and imjello like this.

03-03-2016, 05:25 PM	#6521 (permalink)
berrydingle Base Member Join Date: Feb 2016 Location: Atlanta, GA Posts: 128 Drives: 2012 370z Rep Power: 9	Ordered GTR Start button and did mine just now! Took 2 minutes, literally. Ghostvette, falicfr, HulaGirl and 1 others like this.

03-03-2016, 06:04 PM	#6522 (permalink)
A.Alva Base Member Join Date: Feb 2016 Location: Huntington Beach Posts: 11 Drives: 2016 370z Base M6 Rep Power: 9	I dropped off my Z to get a clear bra for the front end and also to get limo tint on all the windows and a sun strip HulaGirl likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) X	eastwest2300	The Lounge (Off Topic)	10036	02-18-2014 06:26 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

03-02-2016, 12:39 PM	#6511 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	probably want to make or get a finisher for dat knob to make it more complete.

03-03-2016, 08:11 AM	#6516 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9434	looking at the 14-day forecast for the weather. next week has a LOT of rain midweek with nice double digit temps! I MIGHT be able to bring her out in about 2 weeks assuming the temps stay above 0 and no snow in the forecast! oh and started inquiring about a tune to compare ecutek/uprev prices (or availability in my case). time to clean up my AFR and get rid of that throttle lag!

03-03-2016, 11:33 AM	#6519 (permalink)
JSur Base Member Join Date: Mar 2016 Location: Orlando Posts: 84 Drives: 2011 370z TT Rep Power: 9	Ordered parts to replace banjo connector on driver side turbo and clutch slave 11' 370z TT

03-03-2016, 07:52 PM	#6523 (permalink)
Z in the 6 Base Member Join Date: Sep 2015 Location: Etobicoke"West Toronto" Posts: 99 Drives: 2016 370z Rep Power: 9	Drove it and priced out a stock to nismo exhaust conversion through a local dealer