[Official] Which 1st mod(s) for my Z thread.

Econ · 04-01-2011, 09:14 AM

Quote:

Originally Posted by jazz

if you cant do a lot at once i agree!

ark is very nice! but the finish on the HKS is better i think.

that it is, but i got the ark for $900

jazz · 04-02-2011, 10:06 AM

for 900 i would do the same! good buy.

tonythetiger · 04-03-2011, 05:39 PM

get an oil cooler!!

jazz · 04-12-2011, 05:26 PM

Quote:

Originally Posted by tonythetiger

get an oil cooler!!

not sure if he needs an oilcooler in his state...only a few days a year of hot weather! i dont think i will need it....we get like a week of +90 temps

daisuke149 · 04-12-2011, 05:29 PM

Quote:

Originally Posted by jazz

if you cant do a lot at once i agree!

ark is very nice! but the finish on the HKS is better i think.

having seen ARK and HKS in person, i dont think there is a difference in the finish.

And while i cannot speak for the HKS on this, the ARK is sturdy as heck. Mine had hit the ground a couple of times (thanks driveway) but it never cracked, or anything. Just looks like a tiny scrape.

JayYoon · 04-12-2011, 05:55 PM

ask yourself... how much money are you willing to spend?

Nismo221 · 04-12-2011, 05:57 PM

ClearBra should be your first mod. I wish I would have gotten one when I first got the car.

Dre22 · 04-13-2011, 10:28 PM

i just bought my Z a week ago and been asking myself the same question but i think i ma go with intake first and then with an exhaust system =D

FromG2Z · 04-13-2011, 11:04 PM

Quote:

Originally Posted by Red__Zed

I like exhaust as a first mod. The car sounds entirely too tame from the factory.

Quote:

Originally Posted by OldGuy

ClearBra on the hood, bumper and mirrors. Do it before before the chips hit. Don't put it off, it will only cost you more for chip removal as the prep to the ClearBra.

Quote:

Originally Posted by definitionxmk

shift knob =)

with all 3 above. I have done the clear bra (immediately after purchase... my front end is CHIP FREE), then shift knob (nismo titanium....loooooooove the look and snickety feel it now gives me). This weekend I install my invidia exhaust!!!

Mt Tam I am · 04-14-2011, 12:23 AM

Quote:

Originally Posted by KillerBee370

Wow. On page three and nobody mentioned what the real first mod should be. The first "mod" that went onto my car.... The oil cooler.

What good is everything listed above when you're in limp mode?

This was my first mod as well. Had them install it with the new short block. I forgot all about sitting on the side of the road, cooling down. I forgot about it because it works so well. Limp mode or worrying about it stinks, the oil cooler is sound advice if you push your car at all.

RC 370z · 06-18-2011, 11:18 PM

Just something i thought of while reading and looking at pictures of different Z's. i was curious to know what kind of mod was first done/installed, how much it was (if you guys don't mind me asking), and maybe if you still have it or has been removed and why?

im a new Z owner and im looking to see what you guys did with yours. thanks

christian370z · 06-18-2011, 11:22 PM

The first mod I did was to install VLED LED parking light bulbs about 3 days after I drove the car back from the dealer, but the first major mod I did were my Berk high flow cats and Stillen sway bars at the same time about a week after I bought the car haha.

TruKoi · 06-18-2011, 11:22 PM

Car's about 3 weeks old..waiting on HFC to arrive on Tuesday and first mods will be onWednesday..installation of CBE and HFC.

And grats on the new Z.

Lemers · 06-18-2011, 11:28 PM

Are drop ins considered a mod?

RC 370z · 06-18-2011, 11:32 PM

Quote:

Originally Posted by christian370z

The first mod I did was to install VLED LED parking light bulbs about 3 days after I drove the car back from the dealer, but the first major mod I did were my Berk high flow cats and Stillen sway bars at the same time about a week after I bought the car haha.

ohh nice! haha
im hoping to get something done soon.

04-02-2011, 10:06 AM	#152 (permalink)
jazz Track Member Join Date: Feb 2011 Location: barrie ON Posts: 910 Drives: 11Zcab/12venzaV6awd Rep Power: 15	for 900 i would do the same! good buy. __________________ One part rubber, three parts Krazy Glue.

04-03-2011, 05:39 PM	#153 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 192	get an oil cooler!! __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

04-12-2011, 05:57 PM	#157 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 35 Posts: 489 Drives: 2010 370z Nismo Rep Power: 14	ClearBra should be your first mod. I wish I would have gotten one when I first got the car. __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

06-18-2011, 11:18 PM	#161 (permalink)
RC 370z Base Member Join Date: Jun 2011 Location: GA Posts: 106 Drives: 2011 370Z Black 7MT Rep Power: 13	What was the first mod done to your Z? Just something i thought of while reading and looking at pictures of different Z's. i was curious to know what kind of mod was first done/installed, how much it was (if you guys don't mind me asking), and maybe if you still have it or has been removed and why? im a new Z owner and im looking to see what you guys did with yours. thanks __________________ 2011 370Z Magnetic Black 7AT. E, ' \' ' ,F

06-18-2011, 11:22 PM	#162 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	The first mod I did was to install VLED LED parking light bulbs about 3 days after I drove the car back from the dealer, but the first major mod I did were my Berk high flow cats and Stillen sway bars at the same time about a week after I bought the car haha. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

04-12-2011, 05:55 PM	#156 (permalink)
JayYoon Enthusiast Member Join Date: Jul 2010 Location: san diego Posts: 452 Drives: 2010 370z Rep Power: 14	ask yourself... how much money are you willing to spend?

04-13-2011, 10:28 PM	#158 (permalink)
Dre22 Base Member Join Date: Apr 2011 Location: New York Posts: 15 Drives: 2010-370Z Rep Power: 14	i just bought my Z a week ago and been asking myself the same question but i think i ma go with intake first and then with an exhaust system =D

06-18-2011, 11:22 PM	#163 (permalink)
TruKoi Base Member Join Date: Aug 2009 Location: NJ Posts: 49 Drives: '11 Z Touring Sport Rep Power: 15	Car's about 3 weeks old..waiting on HFC to arrive on Tuesday and first mods will be onWednesday..installation of CBE and HFC. And grats on the new Z.

06-18-2011, 11:28 PM	#164 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	Are drop ins considered a mod? __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OFFICIAL NHL Thread	FPenvy	Sports	409	12-29-2020 07:44 AM
Official NBA Thread	nmjaxx9	Sports	949	07-13-2019 10:45 AM
Official What Are You Looking For Thread?	THMotorsports	THMotorsports	10	02-21-2017 06:24 PM
The official: oops i started a "Steering lock recall!!!" Thread; thread	AWSneer	Nissan 370Z General Discussions	31	06-04-2013 10:23 PM
Official Z33 to Z34 thread!	SmoothZ	Nissan 370Z General Discussions	64	11-17-2011 08:34 PM