How high to rev before shifting in each gear?

Chuck33079 · 11-27-2013, 02:51 PM

Feel free to hit redline after its broken in. Anyone who tells you that there's any danger to the motor when you hit fuel cut is unclear about the purpose of the rev limiter. If 7500 rpm would hurt the motor in any way, Nissan would have set the rev limiter lower.

I broke my car in just like the manual called for. There's a lot of opinions out there on how to do it, and its damn near impossible to prove one is better than another.

alcheng · 11-27-2013, 05:01 PM

Quote:

Originally Posted by eurojjj19

I dont plan on driving it like i stole it all the time. But everyone likes to open it up once in a while. So can you, or anyone else, give me a rough estimate of max MPH for each gear (ie. what NOT to go over, if such numbers exist). I dont plan on coming close to those ranges, i just want to know for informations sake.

The reason all of these questions sound so noobish is because my first manual was a 94 Civic and it did NOT have a tachometer, so i had to base everything off of mph and engine sound. So im now trying to wrap my head around RPM being the main gauge of when to shift. So, sorry for the simplistic questions, but i am learning.

^that's fine to do with the Z too, when you DD it, you don't need to redline it on every gear, why'd you need to look at the number when you can feel the car...??

synolimit · 11-27-2013, 06:03 PM

Quote:

Originally Posted by Magic Bus

Minsu was a noob to a stick when he got his Z. It looks like he's gotten it down pretty well, so good advice to follow.

Since you're in the break in period, I'd keep the revs under 5K. Many different opinions on here about breaking in a car, but I feel better safe than sorry.

Break in period is a myth. The cars seen redline plenty before it even left Japan.

Joepro · 11-27-2013, 06:35 PM

Quote:

Originally Posted by synolimit

Break in period is a myth. The cars seen redline plenty before it even left Japan.

I agree with this for the most part, remember why an engine needed to break it, to wear some parts in and at one time get all the left over bits of metal from poor machining, manufacturing is so much better now that I have only seen one locked up motor under 5k miles presumably from not breaking it in, it was a brand new Pontiac gran prix, a 1996. That said, there are many other moving parts in the trans and diff as well, so IMO(I did not buy mine new) I would drive it 1k easy change all the fluids and red line away..JMO. On topic I agree with others there is no perfect rpm, you will learn your car and engine and shift by sound, it will become second nature, not all situations are identical, we have hills everywhere, nothing it flat, which sometimes it requires more engine power to achieve the desired acceleration. I know when my car is going to hit red line without looking at the tach, you simply learn the car. Drive it and see what feels good, thats all.

BeemaaZ · 11-27-2013, 06:55 PM

To be honest, I hardly ever see the RPM during gear shifts. You could hear the engine and feel it when it's time to shift, especially if you have an after market exhaust. Pay attention to the surroundings is more important.

synolimit · 11-28-2013, 05:33 AM

Quote:

Originally Posted by Joepro

I agree with this for the most part, remember why an engine needed to break it, to wear some parts in and at one time get all the left over bits of metal from poor machining, manufacturing is so much better now that I have only seen one locked up motor under 5k miles presumably from not breaking it in, it was a brand new Pontiac gran prix, a 1996. That said, there are many other moving parts in the trans and diff as well, so IMO(I did not buy mine new) I would drive it 1k easy change all the fluids and red line away..JMO. On topic I agree with others there is no perfect rpm, you will learn your car and engine and shift by sound, it will become second nature, not all situations are identical, we have hills everywhere, nothing it flat, which sometimes it requires more engine power to achieve the desired acceleration. I know when my car is going to hit red line without looking at the tach, you simply learn the car. Drive it and see what feels good, thats all.

Driving easy, if there are some parts left needing to break in still, will hold them back from their potential. The GTR is practically raced before it leaves the factory. It sees redline, full redline shifts, brakes are glowing orange etc. bikes are also no different when they leave Japan. The 370 will not get this treatment. You need to do full 60 to 10 mph breaks over and over 6-7 times to bed them in, you need to flex the motor and swell the piston rings to get them to seat more, and you need to drain all fluids and refill. Cars fully done in under 200 miles. Leaving the fluids in for 1k is to long. The diff at least has a piss poor magnet to catch metal. My tranny didn't.

jaedub · 11-28-2013, 03:39 PM

370Z is a rough car to shift with. It takes a long time to get used to. But I believe shifting between 2.2k~2.5k is ideal for daily driving because the gear locks in a lot more smoother and it's easier to control without much rocking back and forth. Shifting past 3k causes a lot of jerking/rocking motion with gears going in significantly rougher and forceful.

DOOMMONKEY777 · 11-28-2013, 11:03 PM

Well... i just feel the touqe. If the car feels slow in a gear and speed that am in, i just shift down. If the car feels too roughf i just shift up and if am racing thats a whole other story.

TreeSemdyZee · 12-02-2013, 11:32 AM

Quote:

Originally Posted by Haboob

Daily putt-puttin' around I shift 3500-4000.

I don't remember what I have the shift light set at, though I still need to perfect the shift at redline as to it not bouncing off rev limiter (haven't bounced it yet, but I think I can still shift a little bit later).

I don't take it to redline very much though.

Same here. Don't understand shifting much lower. Sometimes 3,000, but any lower gets into a "bogging" range.

TreeSemdyZee · 12-02-2013, 11:34 AM

Quote:

Originally Posted by jaedub

370Z is a rough car to shift with. It takes a long time to get used to. But I believe shifting between 2.2k~2.5k is ideal for daily driving because the gear locks in a lot more smoother and it's easier to control without much rocking back and forth. Shifting past 3k causes a lot of jerking/rocking motion with gears going in significantly rougher and forceful.

? Not my experience at all.

jlo370z · 12-02-2013, 01:55 PM

So far everyone has this wrong, wrong, wrong!!!!

I recommend you take your Z to your local dyno and look at the chart they print out for you. where you see your power begin to drop off, that is your new shift point.

why not spend a couple bucks to find the most optimal shift point I say

Troyz · 12-02-2013, 04:40 PM

My shifting points are...

1st to 2nd - 43 mph
2nd to 3rd - 74 mph
3rd to 4th - 104 mph
4th to 5th - 124 mph
5th to 6th - 159 mph

But i couldn't wrap my head around the point of having to shift in 25-30mph increments (4-->5-->6). That just seems to make 6th gear pretty worthless imho. I'm not trying to argue, just explaining my thought process.

Quote:

Originally Posted by eurojjj19

I did see those numbers in the manual, they are:

1st to 2nd - 15mph
2nd to 3rd - 25 mph
3rd to 4th - 40 mph
4th to 5th - 45 mph
5th to 6th - 50 mph

But i couldnt wrap my head around the point of having to shift in 5mph increments (4-->5-->6). That just seems to make 4th and 5th gear pretty worhtless imo. Im not trying to argue, just explaining my thought process.

TreeSemdyZee · 12-02-2013, 04:57 PM

Quote:

Originally Posted by jlo370z

So far everyone has this wrong, wrong, wrong!!!!

I recommend you take your Z to your local dyno and look at the chart they print out for you. where you see your power begin to drop off, that is your new shift point.

why not spend a couple bucks to find the most optimal shift point I say

Pretty strong statement without backing it up with some numbers.

jlo370z · 12-02-2013, 04:59 PM

Quote:

Originally Posted by TreeSemdyZee

Pretty "sarcastic" statement without backing it up with some numbers.

there fixed it for you

andre12031948 · 12-02-2013, 05:11 PM

Quote:

Originally Posted by jlo370z

So far everyone has this wrong, wrong, wrong!!!!

I recommend you take your Z to your local dyno and look at the chart they print out for you. where you see your power begin to drop off, that is your new shift point.

why not spend a couple bucks to find the most optimal shift point I say

"where you see the power begin to drop off"

11-27-2013, 02:51 PM	#31 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	How high to rev before shifting in each gear? Feel free to hit redline after its broken in. Anyone who tells you that there's any danger to the motor when you hit fuel cut is unclear about the purpose of the rev limiter. If 7500 rpm would hurt the motor in any way, Nissan would have set the rev limiter lower. I broke my car in just like the manual called for. There's a lot of opinions out there on how to do it, and its damn near impossible to prove one is better than another. IDZRVIT and DEpointfive0 like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

11-27-2013, 06:55 PM	#35 (permalink)
BeemaaZ A True Z Fanatic Join Date: Sep 2011 Location: Irvine, CA Posts: 2,594 Drives: 40thAE#472 Rep Power: 507	To be honest, I hardly ever see the RPM during gear shifts. You could hear the engine and feel it when it's time to shift, especially if you have an after market exhaust. Pay attention to the surroundings is more important. Streetlife likes this. __________________ SoCal 40th Meet Old & New Mods Steering Lock RECALL**** Own 40th 370Z? Get the build # and the Manuf. date here

11-28-2013, 11:03 PM	#38 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Sep 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 20	Well... i just feel the touqe. If the car feels slow in a gear and speed that am in, i just shift down. If the car feels too roughf i just shift up and if am racing thats a whole other story. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

12-02-2013, 01:55 PM	#41 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43426	So far everyone has this wrong, wrong, wrong!!!! I recommend you take your Z to your local dyno and look at the chart they print out for you. where you see your power begin to drop off, that is your new shift point. why not spend a couple bucks to find the most optimal shift point I say __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shifting 1st gear to 2nd at 7500rpm	lauj	Engine & Drivetrain	26	05-13-2014 01:19 AM
Short lasting burning smell high RPM shifting.	XquisiteTaste	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	10	06-09-2013 12:02 AM
Shifting into gear while moving???	Tward	Nissan 370Z General Discussions	50	07-30-2012 06:20 PM
shifting gear problems. burning the clutch?	res0zsfa	Nissan 370Z General Discussions	10	04-29-2010 01:53 PM

11-28-2013, 03:39 PM	#37 (permalink)
jaedub Track Member Join Date: Aug 2010 Location: Los Angeles Posts: 906 Drives: 2010 Black 370Z MT Rep Power: 304	370Z is a rough car to shift with. It takes a long time to get used to. But I believe shifting between 2.2k~2.5k is ideal for daily driving because the gear locks in a lot more smoother and it's easier to control without much rocking back and forth. Shifting past 3k causes a lot of jerking/rocking motion with gears going in significantly rougher and forceful.