does removeing oil pan cover help oil temp?

jerboy · 09-10-2013, 08:08 AM

I have searched but can not find the answer, does leaving off the plastic oil pan cover help the oil run cooler? The one that you must remove to change the oil. Thanks

onzedge · 09-10-2013, 08:28 AM

Quote:

Originally Posted by jerboy

I have searched but can not find the answer, does leaving off the plastic oil pan cover help the oil run cooler? The one that you must remove to change the oil. Thanks

It might help a little bit, but the first time you catch a rock or other road debris up into the engine compartment you may wish you had not removed the shield.

Chuck33079 · 09-10-2013, 08:42 AM

Replace it with the ZSpeed metal one. It's got cooling vents (although it's hard to say if they do anything), and it's much tougher than the stock plastic one.

onzedge · 09-10-2013, 08:47 AM

Quote:

Originally Posted by Chuck33079

Replace it with the ZSpeed metal one. It's got cooling vents (although it's hard to say if they do anything), and it's much tougher than the stock plastic one.

I have one as well.

2011 Nismo#91 · 09-10-2013, 08:49 AM

Quote:

Originally Posted by jerboy

I have searched but can not find the answer, does leaving off the plastic oil pan cover help the oil run cooler? The one that you must remove to change the oil. Thanks

No noticeable difference. My oil pan cover, nismo version, fell off for the third time now and this time I wasn't able to retrieve it. I have the Zspeed metal one on order, hopefully it arrives soon. But for the last few weeks I have not seen any change from the norm.

I still can't believe Nissan charges 900 for the stupid little piece of plastic.

onzedge · 09-10-2013, 08:50 AM

Quote:

Originally Posted by 2011 Nismo#91

No noticeable difference. My oil pan cover, nismo version, fell off for the third time now and this time I wasn't able to retrieve it. I have the Zspeed metal one on order, hopefully it arrives soon. But for the last few weeks I have not seen any change from the norm.

I still can't believe Nissan charges 900 for the stupid little piece of plastic.

Are you serious? That thing is held on with 16 fasteners (or so) and it has fallen off 3 times???

DavidInIndy · 09-10-2013, 08:53 AM

Quote:

Originally Posted by 2011 Nismo#91

No noticeable difference. My oil pan cover, nismo version, fell off for the third time now and this time I wasn't able to retrieve it. I have the Zspeed metal one on order, hopefully it arrives soon. But for the last few weeks I have not seen any change from the norm.

I still can't believe Nissan charges 900 for the stupid little piece of plastic.

Whoa. That's crazy.

kenchan · 09-10-2013, 09:22 AM

without the lower shroud i read that the front bumper can not handle the air and starts deforming at speed.

and yah, tighten those bolts snug tight. i lost a few screws on my G when i let my dealer do the first 2 free oil change while new.

was a big mistake. (they gave me replacements).

Chuck33079 · 09-10-2013, 09:27 AM

Quote:

Originally Posted by kenchan

without the lower shroud i read that the front bumper can not handle the air and starts deforming at speed.

Another good point. It keeps the bottom of the bumper in place. Plus, the car was designed to be run with it on. With it off, couldn't air force its way up into the engine compartment from underneath and slow airflow through the radiator?

onzedge · 09-10-2013, 09:36 AM

Quote:

Originally Posted by kenchan

without the lower shroud i read that the front bumper can not handle the air and starts deforming at speed.

and yah, tighten those bolts snug tight. i lost a few screws on my G when i let my dealer do the first 2 free oil change while new.

was a big mistake. (they gave me replacements).

DEpointfive0 · 09-10-2013, 09:38 AM

Quote:

Originally Posted by Chuck33079

Another good point. It keeps the bottom of the bumper in place. Plus, the car was designed to be run with it on. With it off, couldn't air force its way up into the engine compartment from underneath and slow airflow through the radiator?

^Yessir, exactly!

Mt Tam I am · 09-10-2013, 09:43 AM

Quote:

Originally Posted by onzedge

Are you serious? That thing is held on with 16 fasteners (or so) and it has fallen off 3 times???

Their are an awful lot of those screws alright holding on the cover. If it fell off, something is wrong.

onzedge · 09-10-2013, 09:46 AM

Quote:

Originally Posted by Mt Tam I am

Their are an awful lot of those screws alright holding on the cover. If it fell off, something is wrong.

Trips · 09-10-2013, 09:49 AM

Have an Oil Cooler installed and end of issue.

kenchan · 09-10-2013, 09:54 AM

just for the hell of it though, i kinda want that metal shroud.

wont do any good performance wise for me, i know, but just because.

09-10-2013, 08:08 AM	#1 (permalink)
jerboy Base Member Join Date: Aug 2013 Location: lebanon mo Posts: 22 Drives: 2013 red 370z roadst Rep Power: 11	does removeing oil pan cover help oil temp? I have searched but can not find the answer, does leaving off the plastic oil pan cover help the oil run cooler? The one that you must remove to change the oil. Thanks

09-10-2013, 08:42 AM	#3 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Replace it with the ZSpeed metal one. It's got cooling vents (although it's hard to say if they do anything), and it's much tougher than the stock plastic one. onzedge likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

09-10-2013, 09:22 AM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	without the lower shroud i read that the front bumper can not handle the air and starts deforming at speed. and yah, tighten those bolts snug tight. i lost a few screws on my G when i let my dealer do the first 2 free oil change while new. was a big mistake. (they gave me replacements). Trips likes this.

09-10-2013, 09:49 AM	#14 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Have an Oil Cooler installed and end of issue. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] RJM Clutch Pedal, Tonneau Cover, 40th floor mats, under tray, Engine cover	DEpointfive0	Parts for sale (Private Classifieds)	41	11-21-2013 10:36 AM
[FOR SALE] SOCAL ARK DTS EXHAUST , JDM Key Cover, KN filters, Genuine Nismo Engine Cover	FairladyZ	Parts for sale (Private Classifieds)	35	05-22-2013 06:54 PM
[FOR SALE] 350z Battery Cover, Floor Mats, Engine Cover, Head Unit, & Center Console	Nism0	Parts for sale (Private Classifieds)	10	10-01-2012 09:48 PM
[FOR SALE] OEM bulbs, cargo cover, 5mm spacers, fitted sun shade, 40th car cover	98intrigue	Parts for sale (Private Classifieds)	28	08-23-2012 10:49 PM
fs: Megan Racing Oil Temp/Water Temp/Oil Psi Gauge	cossie1600	Parts for sale (Private Classifieds)	0	04-13-2010 09:17 PM

09-10-2013, 09:54 AM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	just for the hell of it though, i kinda want that metal shroud. wont do any good performance wise for me, i know, but just because.