Carbon Fiber B pillars

SpawnAeroJohn · 07-16-2009, 01:07 PM

We do have the right materials now and we knew we had to have some great working epoxy here. We do work out of the garage as its been said before which we prefer because its the right size environment we need as of right now and all of our post work is done at an actual shop that is on the same block as our place so it all works out just great for us. No over head, spray booth half way down the block we can use freely, enough room to work, what more can we ask for as of right now? 4 walls and a roof does not make the parts. Workers make the parts.

And yes when we do have steady sales then we will be getting a shop just to have a more professional stance as far as the facility.

And we did state CF doors if there is enough time but we said there probably wont be. And the wide body wouldn’t have been until later on this year. The Z also went back stock due to the FACT that the epoxy was just no good so we talked it through with bullitt and we all decided the best thing to do is send the parts the following week or 2 to get everything done right the first time.

We refuse to send inferior products or products we know wont last. We want nothing but the best for your products.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber B pillars ready to order!	SpawnAeroJohn	Exterior & Interior	174	10-12-2009 08:50 AM
Carbon Fiber Fenders	SpawnAeroJohn	Exterior & Interior	20	06-16-2009 08:42 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM
Paint carbon fiber?	eXo5	Exterior & Interior	5	05-15-2009 02:59 PM
Carbon Fiber Exhaust	nogoodname	Intake/Exhaust	33	02-04-2009 07:14 AM

07-16-2009, 01:07 PM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 18	We do have the right materials now and we knew we had to have some great working epoxy here. We do work out of the garage as its been said before which we prefer because its the right size environment we need as of right now and all of our post work is done at an actual shop that is on the same block as our place so it all works out just great for us. No over head, spray booth half way down the block we can use freely, enough room to work, what more can we ask for as of right now? 4 walls and a roof does not make the parts. Workers make the parts. And yes when we do have steady sales then we will be getting a shop just to have a more professional stance as far as the facility. And we did state CF doors if there is enough time but we said there probably wont be. And the wide body wouldn’t have been until later on this year. The Z also went back stock due to the FACT that the epoxy was just no good so we talked it through with bullitt and we all decided the best thing to do is send the parts the following week or 2 to get everything done right the first time. We refuse to send inferior products or products we know wont last. We want nothing but the best for your products.