Reduce Brake Temperatures : Ideas ??

shadoquad · 10-09-2012, 01:35 PM

I also rock the Motul 600 fluid, but I've heard that if you drive hard enough, even that won't cut it. It worked for me on my track day with no drama.

You can look into the Stillen brake cooling ducts. They run from the space next to the fangs directly back to the rotors in front.

And it probably goes without saying that you should upgrade the pads from stock.

jcosta79 · 10-09-2012, 01:40 PM

For track use you want Castrol SRF. It's not cheap, but then you get what you pay for.

You will also want to look into getting some brake cooling ducts.

10-09-2012, 01:40 PM	#2 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 16	For track use you want Castrol SRF. It's not cheap, but then you get what you pay for. You will also want to look into getting some brake cooling ducts. shadoquad likes this. __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake Air Temperatures	jpit	Intake/Exhaust	65	02-07-2013 07:28 AM
Want to reduce weight need ideas	Mino	Track / Autocross / Drifting / Dragstrip	3	06-30-2012 01:16 PM
near-freezing temperatures	Mt Tam I am	Wheels & Tires	15	12-13-2011 01:15 AM
Forced Induction oil temperatures	xbigb4ller69z	Forced Induction	46	08-18-2010 08:45 PM

10-09-2012, 01:35 PM	#1 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3888	I also rock the Motul 600 fluid, but I've heard that if you drive hard enough, even that won't cut it. It worked for me on my track day with no drama. You can look into the Stillen brake cooling ducts. They run from the space next to the fangs directly back to the rotors in front. And it probably goes without saying that you should upgrade the pads from stock.