Anyone have 20 inch rims?

future370zzz · 07-12-2012, 07:30 PM

Quote:

Originally Posted by DjSquall

I run 255/35/20 fronts (20x10) and 305/25/20 rears (20x12)

Every bump and pothole is scary.

OMG! I'm going to be running this same setup except on 20x9.5 front and 20x10.5 rears.

I hope the ride isn't too harsh and bumps too bad.

Z11 · 07-12-2012, 07:32 PM

Quote:

Originally Posted by Csquared

I'm on 255/30/20 - 285/30/20

Closest I have to a side shot. I'm on stock height though.

ya ill have stock suspension as well, only changing tires and rims, might go with the falken FK452? since toyo discontinued the proxes T1R, 1 flat and im stuck with 3, no one will buy 3... and too much work to sell it unless its local

Fabio88 · 07-12-2012, 07:32 PM

Quote:

Originally Posted by Z11

does anyone have 20 inch wheels on? and what tire size?

here are some pics of a car with 20 inch rims and low pro tires i believe, i want 20's with similar tires, but look at how close the tires are to the fenders all around.. one TINY bump and there goes all four fenders... thats what im worried about.

here are pics.

Strasse Forged Wheels Supercharged 370z | Flickr - Photo Sharing!

Strasse Forged Wheels Supercharged 370Z | Flickr - Photo Sharing!

Google Image Result for http://farm8.static.flickr.com/7196/6926006006_95c85dc1aa.jpg

Google Image Result for http://farm8.static.flickr.com/7123/6939948030_3802c5302d.jpg

http://www.google.ca/imgres?q=370z+s...r:10,s:0,i:105

heres my rims

http://sphotos-a.xx.fbcdn.net/hphoto...63722085_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...64426261_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...18715937_n.jpg

Z11 · 07-12-2012, 07:34 PM

Quote:

Originally Posted by DjSquall

I run 255/35/20 fronts (20x10) and 305/25/20 rears (20x12)

Every bump and pothole is scary.

your scaring me dude. i wash my car every week by hand, and rims and calipers and inside, i pretty much spend over an hour every time before i ride it, im a perfectionist.. so you can only imagine how ill react if i F up my fender..

dammit... what to do now..

Z11 · 07-12-2012, 07:38 PM

Quote:

Originally Posted by Fabio88

heres my rims

http://sphotos-a.xx.fbcdn.net/hphoto...63722085_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...64426261_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...18715937_n.jpg

what size are they?

Liquid_G · 07-12-2012, 07:50 PM

20x9.5 +6 20x10.5 -12 225/35 255/35. Some camber, rolled fenders in the front and front bumper tabs re-done. No rubbing at all. Chicago roads suck but had these wheels for over a year now and no bends.. I think the step lip helps the strength because I've hit some potholes that made my butthole pucker and they've been fine.

Z11 · 07-12-2012, 08:06 PM

Quote:

Originally Posted by Liquid_G

20x9.5 +6 20x10.5 -12 225/35 255/35. Some camber, rolled fenders in the front and front bumper tabs re-done. No rubbing at all. Chicago roads suck but had these wheels for over a year now and no bends.. I think the step lip helps the strength because I've hit some potholes that made my butthole pucker and they've been fine.

pic didnt work

DjSquall · 07-12-2012, 08:30 PM

Quote:

Originally Posted by Z11

what do you mean by properly set up, in which way? and what bends?

also, i see your in thornhill, have you done any mods like speakers and alarm to your ride? or anything else?

By properly set up, I mean ride height & camber. 20x12's dont fit the stock height, theyll stick out. (At least with my offset) I dropped mine and currently run -4.8 camber. This is on KWV3 coilovers and SPC camber & control arms.

The ride is stiff as hell, but when it bumps, the wheels tuck into the fenders. On a full tank, I can barely fit 3 pennies between the rears and the quarterpanels.

Liquid_G · 07-12-2012, 08:31 PM

reuploaded to photobucket.. maybe dropbox link wasn't working for you.

snea · 07-12-2012, 08:53 PM

You're not gonna f'up your fender since you'd most likely hit the inner plastics which are somewhat durable and replaceable. If you did happen to sustain a little dent on the lip on your wheel it is typically repairable without any noticeable effect for around $100 - $150.

I think most people who put 20s on their cars are also lowered and so are much more likely to run in to trouble than you would be. Just be cautious as to where you drive.

Fabio88 · 07-12-2012, 09:39 PM

Quote:

Originally Posted by Z11

what size are they?

mine is 275 30 20 rear front is 245 35 20

sfearl1 · 07-12-2012, 10:19 PM

Quote:

Originally Posted by Fabio88

mine is 275 30 20 rear front is 245 35 20

Same as my setup... Toyo T1 Sport 245/35/20, 275/30/20

future370zzz · 07-12-2012, 10:45 PM

Quote:

Originally Posted by Liquid_G

20x9.5 +6 20x10.5 -12 225/35 255/35. Some camber, rolled fenders in the front and front bumper tabs re-done. No rubbing at all. Chicago roads suck but had these wheels for over a year now and no bends.. I think the step lip helps the strength because I've hit some potholes that made my butthole pucker and they've been fine.

That looks sick! Ordered the same exact rims except in bronze lip with black face. Offset is not as aggressive though.

The Work barrels are also forged so they are stronger than your standard wheel.

Hopefully I will have the same luck with mine.

Z-Girl 12 · 07-13-2012, 04:56 AM

Quote:

Originally Posted by Liquid_G

reuploaded to photobucket.. maybe dropbox link wasn't working for you.

Liquid_G your set up is sick...your on coilovers right? Why did you have the front tabs redone? Can't we just go without them? I'm still trying to decide if I want to take the jump to 20s or go as aggressive I can with 19s. The step lip is so enticing...

W.O.W. 370Z · 07-13-2012, 07:11 AM

Step lips for sure!

Sent from my SPH-D710 using Tapatalk 2

07-12-2012, 07:50 PM	#21 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 43	20x9.5 +6 20x10.5 -12 225/35 255/35. Some camber, rolled fenders in the front and front bumper tabs re-done. No rubbing at all. Chicago roads suck but had these wheels for over a year now and no bends.. I think the step lip helps the strength because I've hit some potholes that made my butthole pucker and they've been fine. __________________ Last edited by Liquid_G; 07-12-2012 at 08:30 PM.

07-12-2012, 08:31 PM	#24 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 43	reuploaded to photobucket.. maybe dropbox link wasn't working for you. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
lightweight 18 inch rims for track use	MD-370z	Track / Autocross / Drifting / Dragstrip	6	05-07-2013 04:01 PM
Lightwieght 18 inch rims	harman.khinda	Wanted	0	04-18-2012 12:01 PM
19 inch Nismo Rims	Z Monster	Wanted	0	03-02-2011 12:48 AM
FS: 18 inch stock rims and tires	triadz	Parts for sale (Private Classifieds)	19	02-09-2011 09:56 PM
19 Inch Volk Racing TE 37 Rims	macrone629	Parts for sale (Private Classifieds)	5	10-26-2009 05:44 PM

07-12-2012, 08:53 PM	#25 (permalink)
snea Base Member Join Date: May 2012 Location: Panama City Posts: 44 Drives: Blue 370Z 6M Rep Power: 13	You're not gonna f'up your fender since you'd most likely hit the inner plastics which are somewhat durable and replaceable. If you did happen to sustain a little dent on the lip on your wheel it is typically repairable without any noticeable effect for around $100 - $150. I think most people who put 20s on their cars are also lowered and so are much more likely to run in to trouble than you would be. Just be cautious as to where you drive.

07-13-2012, 07:11 AM	#30 (permalink)
W.O.W. 370Z A True Z Fanatic Join Date: Mar 2010 Location: Miami Posts: 1,757 Drives: 2010 Touring Sport Z Rep Power: 19	Step lips for sure! Sent from my SPH-D710 using Tapatalk 2