What did you do with your Z today III

ZMan8 · 04-17-2012, 09:52 AM

Quote:

Originally Posted by EazyD

Morning, all. Any insight into my smelly A/C predicament?

Today, I used the California Duster to get it back to shiny. Live on a dusty road that blows dust on things over night :/ Oh, and pollen.

Run the air with the A/c off for a couple minutes before you turn of your car, this should help with the smell

GaleForce · 04-17-2012, 09:53 AM

Quote:

Originally Posted by m4a1mustang

Wait for it...

Ahh, there we go.

yep, predictable yet comforting.

kenchan · 04-17-2012, 10:06 AM

Quote:

Originally Posted by GaleForce

Yeah, my previous employer was nice enough to buy me a bunch of tools. 1000v Cat 4 rated screw drivers....

wow, that's nice!

yah, i was eyeing the wera's green/black set which is the non-electrical one. but then again, my driver set is still okay so...

maybe for pop's day i will ask for the set.

how is the metal on the wera screw drivers? is it super strong or equivalent to about a professional line craftsman?

weha also makes nice drivers. their metals are super strong.

bbigby64 · 04-17-2012, 11:02 AM

Quote:

Originally Posted by TheGreatOne

Morning Everyone

I got my first ticket speeding ticket in maybe 10 years

I speed sometimes but do it smartly and in intervals, usually.

I was driving back from Ottawa (1.5 hrs away form Montreal) and was flying, 130km

...it was pitch black...cop was nice, marked it down to 120 and $98 instead of $260

However the trip was not in vain...I picked up a pair of Motordyne ART pipes in mint condition with only 1000km on them

TheGreatOne: What was the speed limit? I go 80 mph (130 kph) on a 65 mph (104 kph) interstate road here in Upstate, NY, and the troopers don't bother you. 80/130 is probably near the edge though. I even blew by a trooper while going 82 mph. If you're going to speed, you can't do it during conditions where the troopers can hide ... night ... around blind spots, or bends/curves ... behind obstacles. You need clear straight visibility.

By the way, my last 2 speeding tickets were July of 1991 (70 mph in a 55 mph) on I81 in NY, and December of 1990 (77 mph in a 55 mph) on I90. The speed limits have increased to 65 mph on most segments since then ... thank goodness.

kenchan · 04-17-2012, 11:34 AM

hey anyone in midwest selling nismo wheels?

i think i want to have a second set of wheels for my Z and my choice is nismo wheels with PSS...

if not, i will just buy new probably.

dont need tires or tpms.
do need lugs and center caps. flawless is ideal, but not required as i will have them fixed and painted a different color as needed.

or 40th sport wheels. those are cool too, but these will need to be flawless.

GaleForce · 04-17-2012, 12:20 PM

Quote:

Originally Posted by kenchan

wow, that's nice!

yah, i was eyeing the wera's green/black set which is the non-electrical one. but then again, my driver set is still okay so...

maybe for pop's day i will ask for the set.

how is the metal on the wera screw drivers? is it super strong or equivalent to about a professional line craftsman?

weha also makes nice drivers. their metals are super strong.

The Wera tools do the trick but not quite as nice finish as I'm used to. The metals are good, I haven't snapped the tip on a flat head and wear on the Philips/Robertson heads are normal (very little). I do like that the tips on the flats (not the jeweller screwdrivers) have small grooves etched into them for added bite, it does make a difference. Normally I avoid using flat head screwdrivers and fasteners, unfortunately much of the equipment (relays, starters, overloads, etc) used in panel builds for industrial settings have slotted hardware.

kenchan · 04-17-2012, 12:23 PM

Quote:

Originally Posted by GaleForce

The Wera tools do the trick but not quite as nice finish as I'm used to. The metals are good, I haven't snapped the tip on a flat head and wear on the Philips/Robertson heads are normal (very little). I do like that the tips on the flats (not the jeweller screwdrivers) have small grooves etched into them for added bite, it does make a difference. Normally I avoid using flat head screwdrivers and fasteners, unfortunately much of the equipment (relays, starters, overloads, etc) used in panel builds for industrial settings have slotted hardware.

Mr.gale- thank you for the info once again.

I should look into wera next.

I think my ratchet driver should do the trick for the most part. At least I can use impact driver bits if needed.

m4a1mustang · 04-17-2012, 12:27 PM

Well I ordered my Recaros.

onzedge · 04-17-2012, 12:28 PM

Quote:

Originally Posted by m4a1mustang

Well I ordered my Recaros.

m4a1mustang · 04-17-2012, 12:29 PM

Quote:

Originally Posted by onzedge

Those Michelins made it a necessity.

kenchan · 04-17-2012, 12:29 PM

Quote:

Originally Posted by m4a1mustang

Well I ordered my Recaros.

oh wow!

Quote:

Originally Posted by onzedge

hello, mr.onzedge!

btw, if anyone's interested, tirerack's doing a special on continentals...get a free nook when you buy 4. lol

Continental - Drive Your Imagination

onzedge · 04-17-2012, 12:32 PM

Quote:

Originally Posted by m4a1mustang

Those Michelins made it a necessity.

Ha. I am buying a Recaro baby seat for my upcoming Grandchild in a few weeks.

Morning, Mr. Kenchan!

GaleForce · 04-17-2012, 12:32 PM

Quote:

Originally Posted by m4a1mustang

Those Michelins made it a necessity.

ZMan8 · 04-17-2012, 12:46 PM

Quote:

Originally Posted by kenchan

hey anyone in midwest selling nismo wheels?

i think i want to have a second set of wheels for my Z and my choice is nismo wheels with PSS...

if not, i will just buy new probably.

dont need tires or tpms.
do need lugs and center caps. flawless is ideal, but not required as i will have them fixed and painted a different color as needed.

or 40th sport wheels. those are cool too, but these will need to be flawless.

Nismo wheels on the regular Z looks really nice.

kenchan · 04-17-2012, 12:51 PM

Quote:

Originally Posted by onzedge

Ha. I am buying a Recaro baby seat for my upcoming Grandchild in a few weeks.

Morning, Mr. Kenchan!

i have the recaro sports (2 in Fit) and boosters (2 in G).

the sport is like $250 each, but it's well worth it.

the boosters are only like $80 each.

Quote:

Originally Posted by ZMan8

Nismo wheels on the regular Z looks really nice.

yep, you know anyone selling their nismo wheels by chance?

04-17-2012, 12:27 PM	#788 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6964	Well I ordered my Recaros. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 07:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 12:30 AM

04-17-2012, 11:34 AM	#785 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141523	hey anyone in midwest selling nismo wheels? i think i want to have a second set of wheels for my Z and my choice is nismo wheels with PSS... if not, i will just buy new probably. dont need tires or tpms. do need lugs and center caps. flawless is ideal, but not required as i will have them fixed and painted a different color as needed. or 40th sport wheels. those are cool too, but these will need to be flawless.