What did you do with your Z today III

brucelidat · 05-19-2012, 04:15 PM

hey pint, is what finish is that, satin?

Pintsize725 · 05-19-2012, 04:42 PM

Quote:

Originally Posted by happytheman

That sounds like it should work. Good luck Pint. Sorry to hear about the paint.

Phew, came right off luckily! Still need to get under and check to see if it ended up on the carbon fiber as well.

Quote:

Originally Posted by brucelidat

hey pint, is what finish is that, satin?

Mr. brucelidat, it is a satin black. Here are some pictures with sunlight! Please excuse the dead bugs on the front end, haven't had a chance to clean her up.

brucelidat · 05-19-2012, 05:16 PM

Quote:

Originally Posted by Pintsize725

Phew, came right off luckily! Still need to get under and check to see if it ended up on the carbon fiber as well.

Mr. brucelidat, it is a satin black. Here are some pictures with sunlight! Please excuse the dead bugs on the front end, haven't had a chance to clean her up.

Nice! Perfect timing. I was trying to figure out what finish I wanted to and was leaning towards satin. Seeing your picture shave confirmed it for me. Thanks! Looks good!

Pintsize725 · 05-19-2012, 05:24 PM

Quote:

Originally Posted by brucelidat

Nice! Perfect timing. I was trying to figure out what finish I wanted to and was leaning towards satin. Seeing your picture shave confirmed it for me. Thanks! Looks good!

Thank you sir and glad I could help!

kenchan · 05-19-2012, 05:34 PM

Quote:

Originally Posted by alcheng

Mr.kenchan, looks like the Roadster2 is the way to go, speaking of In-Car speakerphone, you may also consider the Blueant S4, I personally don't use speaker phone because I am driving a roadster, but I use a bluetooth headset, and so far I am on my 4th Blueant and they are so far so good, the noise cancellation performance is excellent and I would suggest you look into that too.

hi mr.alcheng!

thanks for the linky, i will check it out.

yah, i think for my car i will use a roaster2 for now unless there are others that can auto on/off.

Quote:

Originally Posted by GaleForce

Just checking in. Taking a Break from correcting the Z. I was hoping I could get away with a one step but my PO106FA just isn't enough to meet my standards. Looks like a two step will work. Did a test spot with D300 on a MF cutting pad, followed up with the PO106FA on an Über green pad, this is the

combo.

Have a great day guys, I'll be in the garage if you need me.

sounds good, mr.gale!

when done.

Quote:

Originally Posted by Nick911sc

Quick post before I have to get off the computer. Just got to my fiance's house with my Z. beautiful day, but I'm not sure if any of you remember me talking about this problem a few months ago...

I'm sitting waiting at a light, car in neutral. Lights about to change, I clutch in, put in first. Car begins to rev to 5k RPMS without touching gas pedal. Stays there revving. I put my car into neutral release the clutch, still revving... clutch in a few times. Still revving, turn off the car, turn back on(while still in traffic), still revving. Finally after I lift my foot off the break pedal it stops revving. Keep in mind it didn't start till the initial clutch in and then didn't stop until my foot was off the break. My foot was no where near the gas and my mats don't even touch the gas pedal. I have to bring it into nissan to get it checked out.

hummm...that is weird indeed. at least you have a MT where you can control the engagement.

i saw a vid of a hyundai that crashed into another car after blowing through 2 traffic signals in downtown korea due to sudden acceleration. hope they recall all the hyundai's before someone dies.

looking good, pint!

nice job with staying up late and getting rid of the overspray.

alcheng · 05-19-2012, 05:30 PM

Quote:

Originally Posted by Pintsize725

Phew, came right off luckily! Still need to get under and check to see if it ended up on the carbon fiber as well.

Mr. brucelidat, it is a satin black. Here are some pictures with sunlight! Please excuse the dead bugs on the front end, haven't had a chance to clean her up.

Ms.Pintsize725... nice PW... I really want to put my Z beside yours...

happytheman · 05-19-2012, 05:53 PM

Quote:

Originally Posted by Pintsize725

Phew, came right off luckily! Still need to get under and check to see if it ended up on the carbon fiber as well.

Mr. brucelidat, it is a satin black. Here are some pictures with sunlight! Please excuse the dead bugs on the front end, haven't had a chance to clean her up.

Glad that paint came off!

I gotta say, that exhaust and satin valance looks mighty

happytheman · 05-19-2012, 05:54 PM

A little PSS and undamaged wheel love!

( Click to show/hide )

Pintsize725 · 05-19-2012, 05:58 PM

Quote:

Originally Posted by happytheman

A little PSS and undamaged wheel love!

( Click to show/hide )

Can I

your car?

They look great!

GaleForce · 05-19-2012, 05:59 PM

Quote:

Originally Posted by happytheman

A little PSS and undamaged wheel love!

( Click to show/hide )

That's a thing of beauty!

onzedge · 05-19-2012, 06:02 PM

Quote:

Originally Posted by happytheman

A little PSS and undamaged wheel love!

( Click to show/hide )

Very very nice.

kenchan · 05-19-2012, 05:56 PM

happy -

happytheman · 05-19-2012, 06:00 PM

Thanks everyone!

Yes Pint you can, but you must allow photography!

I love the way the reflection is showing off the fender well!

happytheman · 05-19-2012, 06:03 PM

I swear, I think a little alarm goes off in your head when anyone mentions PSS!

onzedge · 05-19-2012, 06:32 PM

Quote:

Originally Posted by happytheman

I swear, I think a little alarm goes off in your head when anyone mentions PSS!

Hmm...

Maybe I wrote myself a little script that monitors entries in the forum. Maybe that little script looks for various character strings in new posts -- character strings like "Koni", "Michelin", "PSS" or "boobs". Maybe that little script has a simple algorithm that will trigger an SMS to my phone and an IM to my messenger account when it finds these user-defined strings.

Then again, maybe not.

It's really only a little voice in my head that tells me someone has posted something cool/excellent.

05-19-2012, 04:15 PM	#1 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	hey pint, is what finish is that, satin? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

05-19-2012, 05:54 PM	#8 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	A little PSS and undamaged wheel love! ( Click to show/hide ) __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

05-19-2012, 06:00 PM	#13 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	Thanks everyone! Yes Pint you can, but you must allow photography! I love the way the reflection is showing off the fender well! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

05-19-2012, 06:03 PM	#14 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1823	I swear, I think a little alarm goes off in your head when anyone mentions PSS! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Today was the day.....	Investr	Introduction	7	01-21-2012 07:56 PM
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM
Got My Car Today	PJ370Z	New 370Z Owner	2	03-01-2009 12:30 AM

05-19-2012, 05:56 PM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	happy -