vdc off and slippery light is always on, HELP

Salem · 02-26-2012, 10:23 PM

Hi
I just got my PPE LTH and HKS exhaust installed and when i step on it the vdc off light goes on and te slippery light as well. I have no idea what happened and don't know what to do. Since I have minimum knowledge about cars i thought it might be a fuse problem or something. Another thing, the steering wheel is tilted to the left for he car to go straight. I've read that I can repaid this my self but I'm kinda lost

can anyone help me with this? is it a big thing? I'm afraid if i took it to the dealership they will rip me off.

Thanks in advance.

TerribleONE · 02-26-2012, 10:44 PM

The steering issue can be fixed with an alightment.. And your getting the light cause your spinning the tires!

Jordo! · 02-26-2012, 10:57 PM

The VDC off light shouldn't flash tho'. Could be a bad sensor.

modme · 02-26-2012, 11:13 PM

Quote:

Originally Posted by Jordo!

The VDC off light shouldn't flash tho'. Could be a bad sensor.

Where did the OP say it was flashing?

The shop probably took of the steering coupler to install the headers. They missed the original spline when they put the coupler back on. When the car detects the steering wheel is not straight when going in a straight line, it will turn on the VDC and Slip lights.

Two ways to fix this:

Reconnect the steering coupler to the correct spline.
Get an alignment.

I would recommend going with repositioning the coupler.

Liquid_G · 02-27-2012, 02:03 PM

Had this issue on my Cube after installing coilovers. Toe was WAYYY off, steering wheel 12'oclock was like at 3'oclock position. You definitely need an alignment.

ChipsWithDips · 02-27-2012, 02:09 PM

Quote:

Originally Posted by Salem

Hi
I just got my PPE LTH and HKS exhaust installed and when i step on it the vdc off light goes on and te slippery light as well. I have no idea what happened and don't know what to do. Since I have minimum knowledge about cars i thought it might be a fuse problem or something.

Maybe one of your wheel speed sensors is bad?

Quote:

Originally Posted by Salem

Another thing, the steering wheel is tilted to the left for he car to go straight. I've read that I can repaid this my self but I'm kinda lost

The steering column has to be removed to get the headers in, sounds like whoever installed it didn't line it up properly when they put it back. Don't get a whole new suspension alignment, just align the steering column. They shop that did install should fix this. This sounds like an unrelated issue from the slip light thing.

AWX Z34 · 02-27-2012, 05:03 PM

Quote:

Originally Posted by modme

Where did the OP say it was flashing?

The shop probably took of the steering coupler to install the headers. They missed the original spline when they put the coupler back on. When the car detects the steering wheel is not straight when going in a straight line, it will turn on the VDC and Slip lights.

Two ways to fix this:

Reconnect the steering coupler to the correct spline.
Get an alignment.

I would recommend going with repositioning the coupler.

vividracing · 02-27-2012, 05:07 PM

DO NOT GET AN ALIGNMENT!

An alignment is a band-aid. There is no reason for your alignment to be off after an exhaust install. take your car back to whoever installed the exhaust and ask them to reposition the steering yoke. That will fix all of your problems.

SPOHN · 02-27-2012, 07:43 PM

Quote:

Originally Posted by vividracing

DO NOT GET AN ALIGNMENT!

An alignment is a band-aid. There is no reason for your alignment to be off after an exhaust install. take your car back to whoever installed the exhaust and ask them to reposition the steering yoke. That will fix all of your problems.

I said this one time but someone deleted my post for some reason

7419sundat · 05-25-2012, 06:55 PM

Hey guys I'm having the same problem after I put on my headers but i made it straight and the lights still come on?? Do you need it to be on the exact spline?

kellyefields · 05-25-2012, 07:26 PM

If you have not disconnected the battery try doing that and letting it sit overnight if possible then reconnect. sometimes if they did not disconnect the battery during their install odd things happen. I would try this first. Also for the OP like everyone else has said ensure the spline is redone and this will fix your steering wheel problem. your alignment is not in issue as long as it was good before you had the work done.

7419sundat · 05-25-2012, 10:10 PM

I figured it out.. once the the steering wheel is straight with the wheels and if the lights are still on un-spline the steering shaft, and from center you can spin the steering wheel 3 times to left of right and that is center. It'll hit like a sensor or something?

02-26-2012, 10:23 PM	#1 (permalink)
Salem Base Member Join Date: Jul 2011 Location: state college Posts: 50 Drives: 09 370Z Rep Power: 13	vdc off and slippery light is always on, HELP Hi I just got my PPE LTH and HKS exhaust installed and when i step on it the vdc off light goes on and te slippery light as well. I have no idea what happened and don't know what to do. Since I have minimum knowledge about cars i thought it might be a fuse problem or something. Another thing, the steering wheel is tilted to the left for he car to go straight. I've read that I can repaid this my self but I'm kinda lost can anyone help me with this? is it a big thing? I'm afraid if i took it to the dealership they will rip me off. Thanks in advance.

02-26-2012, 10:44 PM	#2 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	The steering issue can be fixed with an alightment.. And your getting the light cause your spinning the tires! __________________ 638WHP 541WTQ @ 13.5PSI Build thread

02-26-2012, 10:57 PM	#3 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	The VDC off light shouldn't flash tho'. Could be a bad sensor. __________________ Enjoy it. Destroy it.

02-27-2012, 02:03 PM	#5 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 43	Had this issue on my Cube after installing coilovers. Toe was WAYYY off, steering wheel 12'oclock was like at 3'oclock position. You definitely need an alignment. __________________

02-27-2012, 05:07 PM	#8 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	DO NOT GET AN ALIGNMENT! An alignment is a band-aid. There is no reason for your alignment to be off after an exhaust install. take your car back to whoever installed the exhaust and ask them to reposition the steering yoke. That will fix all of your problems. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

05-25-2012, 06:55 PM	#10 (permalink)
7419sundat Base Member Join Date: Aug 2011 Location: colorado Posts: 145 Drives: 09 370z Gtm TT 2 Rep Power: 13	Hey guys I'm having the same problem after I put on my headers but i made it straight and the lights still come on?? Do you need it to be on the exact spline?

05-25-2012, 07:26 PM	#11 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 47 Posts: 1,149 Drives: Supercharged Rep Power: 16	If you have not disconnected the battery try doing that and letting it sit overnight if possible then reconnect. sometimes if they did not disconnect the battery during their install odd things happen. I would try this first. Also for the OP like everyone else has said ensure the spline is redone and this will fix your steering wheel problem. your alignment is not in issue as long as it was good before you had the work done. __________________ MY 2009 SC BUILD.

05-25-2012, 10:10 PM	#12 (permalink)
7419sundat Base Member Join Date: Aug 2011 Location: colorado Posts: 145 Drives: 09 370z Gtm TT 2 Rep Power: 13	I figured it out.. once the the steering wheel is straight with the wheels and if the lights are still on un-spline the steering shaft, and from center you can spin the steering wheel 3 times to left of right and that is center. It'll hit like a sensor or something?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports JDM Fog Light Light Installation Kit (Starting @ $18.00 w/ out Light)	Dustin@Z1	Body Interior/Exterior	4	11-04-2016 05:16 AM
10' nismo on yokohama advan sport = very slippery	scottnismo	Wheels & Tires	12	12-21-2011 03:30 PM
Local 370z needed for smoked tail light and head light fitting	dantegts	Southern California Region	11	04-07-2010 07:55 PM
Question about fog light for the guys with the factory fog light from Canada/Europe	Jowe	Exterior & Interior	28	09-27-2009 12:50 PM
smoked tail light and head light volunteer covina, ca area	dantegts	Exterior & Interior	0	08-29-2009 12:33 PM