What did you do with your Z today II

alcheng · 02-13-2012, 02:43 AM

Ordered the K&N Typhoon at 3:38am!!!

happytheman · 02-13-2012, 06:51 AM

Quote:

Originally Posted by alcheng

Ordered the K&N Typhoon at 3:38am!!!

In for results! I wonder how well that setup keeps heat from getting sucked into the manifold?

onzedge · 02-13-2012, 08:29 AM

Quote:

Originally Posted by alcheng

Ordered the K&N Typhoon at 3:38am!!!

I am thinking about these as well.

Alchemy · 02-13-2012, 06:24 PM

Quote:

Originally Posted by onzedge

I am thinking about these as well.

All those mods and no intake

Keep me posted on the Koni install. Hope your master tech recovers quickly

onzedge · 02-13-2012, 06:40 PM

Quote:

Originally Posted by Alchemy

All those mods and no intake

Keep me posted on the Koni install. Hope your master tech recovers quickly

I do have an intake -- the Stillen Gen 2. I seriously researched intakes (and this was my first mod) before I settled on the Gen 2. My rationale was that I did not want to remove the front fascia just to clean air filters. Turns out, though, the fascia removal is child's play (meaning even I can do it) and checking the filters on the Gen 2 take just as long. Live and learn.

Anyway, to make a long story short, I am very happy with the Gen 2 performance, but the Typhoon intrigues me. HP gains are good and the filters are totally accessible. I might do it (meaning once I seriously start thinking about something, I usually pull the trigger on it -- it is just another part of my disease).

On to the Koni's. They sit in their boxes on my table saw in the garage. Colin's hand is definitely broken and we will not have an estimate on the repair duration for a couple of days. Plan B is to take it to Taylor's (my other son) shop over in Davis, but this presents a couple of challenges. First, the owner is not as loosey-goosey with the shop rates as Colin's and I will pay more. Note that they have a very sweet alignment rack there that more easily accommodates lowered cars than Colin’s does.

Second, they are not open on weekends at all so it would require calling in "sick" one day. Then I will feel guilty the rest of the day for calling in "not feeling well" and our company policy does not have a provision for Paid Time Off for Koni's. They should, God knows, but they do not.

Plan C is to do them myself, but it would have to be in my garage and without a lift. I would have to go for an alignment anyway when completed.

So there you go. Please let me know if you have any questions or comments and, as always, have a great day.

KingZee · 02-13-2012, 07:31 PM

Quote:

Originally Posted by onzedge

I do have an intake -- the Stillen Gen 2. I seriously researched intakes (and this was my first mod) before I settled on the Gen 2. My rationale was that I did not want to remove the front fascia just to clean air filters. Turns out, though, the fascia removal is child's play (meaning even I can do it) and checking the filters on the Gen 2 take just as long. Live and learn.

Anyway, to make a long story short, I am very happy with the Gen 2 performance, but the Typhoon intrigues me. HP gains are good and the filters are totally accessible. I might do it (meaning once I seriously start thinking about something, I usually pull the trigger on it -- it is just another part of my disease).

On to the Koni's. They sit in their boxes on my table saw in the garage. Colin's hand is definitely broken and we will not have an estimate on the repair duration for a couple of days. Plan B is to take it to Taylor's (my other son) shop over in Davis, but this presents a couple of challenges. First, the owner is not as loosey-goosey with the shop rates as Colin's and I will pay more. Note that they have a very sweet alignment rack there that more easily accommodates lowered cars than Colin’s does.

Second, they are not open on weekends at all so it would require calling in "sick" one day. Then I will feel guilty the rest of the day for calling in "not feeling well" and our company policy does not have a provision for Paid Time Off for Koni's. They should, God knows, but they do not.

Plan C is to do them myself, but it would have to be in my garage and without a lift. I would have to go for an alignment anyway when completed.

So there you go. Please let me know if you have any questions or comments and, as always, have a great day.

I say you make your son Taylor go in on a Saturday since you're his father (Darth Vader Voice)

happytheman · 02-13-2012, 09:07 PM

Quote:

Originally Posted by onzedge

I do have an intake -- the Stillen Gen 2. I seriously researched intakes (and this was my first mod) before I settled on the Gen 2. My rationale was that I did not want to remove the front fascia just to clean air filters. Turns out, though, the fascia removal is child's play (meaning even I can do it) and checking the filters on the Gen 2 take just as long. Live and learn.

Anyway, to make a long story short, I am very happy with the Gen 2 performance, but the Typhoon intrigues me. HP gains are good and the filters are totally accessible. I might do it (meaning once I seriously start thinking about something, I usually pull the trigger on it -- it is just another part of my disease).

On to the Koni's. They sit in their boxes on my table saw in the garage. Colin's hand is definitely broken and we will not have an estimate on the repair duration for a couple of days. Plan B is to take it to Taylor's (my other son) shop over in Davis, but this presents a couple of challenges. First, the owner is not as loosey-goosey with the shop rates as Colin's and I will pay more. Note that they have a very sweet alignment rack there that more easily accommodates lowered cars than Colin’s does.

Second, they are not open on weekends at all so it would require calling in "sick" one day. Then I will feel guilty the rest of the day for calling in "not feeling well" and our company policy does not have a provision for Paid Time Off for Koni's. They should, God knows, but they do not.

Plan C is to do them myself, but it would have to be in my garage and without a lift. I would have to go for an alignment anyway when completed.

So there you go. Please let me know if you have any questions or comments and, as always, have a great day.

Mr. Onzedge, I know I just bought a set of K&N drop-ins, but got them for a really good price and could easily offload them at cost and buy a short ram intake like the Gen II or the Typhoon.... I just don't know what to dooooooo!!

I know...I've got it!!

You buy the Typhoon, and tell me which you like better! Then I can choose vicariously through your trial (and error?)!

onzedge · 02-13-2012, 09:13 PM

Quote:

Originally Posted by happytheman

Mr. Onzedge, I know I just bought a set of K&N drop-ins, but got them for a really good price and could easily offload them at cost and buy a short ram intake like the Gen II or the Typhoon.... I just don't know what to dooooooo!!

I know...I've got it!!

You buy the Typhoon, and tell me which you like better! Then I can choose vicariously through your trial (and error?)!

Ummm... OK.

alcheng · 02-13-2012, 09:25 PM

Quote:

Originally Posted by happytheman

Mr. Onzedge, I know I just bought a set of K&N drop-ins, but got them for a really good price and could easily offload them at cost and buy a short ram intake like the Gen II or the Typhoon.... I just don't know what to dooooooo!!

I know...I've got it!!

You buy the Typhoon, and tell me which you like better! Then I can choose vicariously through your trial (and error?)!

Mr.happytheman, I am using the drop-in and the K&N Typhoon is on the way. While Mr.onzedge is scretching his head as hell about the Koni, I will let you know the before&after about the Typhoon as soon as I can.

LOL

onzedge · 02-13-2012, 09:43 PM

Quote:

Originally Posted by alcheng

Mr.happytheman, I am using the drop-in and the K&N Typhoon is on the way. While Mr.onzedge is scretching his head as hell about the Koni, I will let you know the before&after about the Typhoon as soon as I can.

LOL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

02-13-2012, 02:43 AM	#1 (permalink)
alcheng A True Z Fanatic Join Date: Jun 2011 Location: Toronto Posts: 28,894 Drives: 2011 ZR PW w/Clutch Rep Power: 418354	Ordered the K&N Typhoon at 3:38am!!!