What did you do with your Z today II

happytheman · 03-10-2012, 12:25 PM

Quote:

Originally Posted by ZForce

Whitelines, heard good things about them. Will need to check into the end links and brush up on them. Any threads on them? Basic 101 threads.

Good evening all, or is it morning (moaning) haha.

I am back....sorta. Skimming the headlines only.....posting one liners here and there. All is good in the house for those keeping up with ZForce Times.

The bro has an extended warranty if you catch my drift. Life is Good!

I have not been keeping up with this thread and of course what that means after awhile I stop receiving em feeds. Any new great mods on the market I should be aware of?

The PG caught the notorious CEL, same as the bro's a few months back. Engine idle stays around 1k-1250k and knocks a lot under light acceleration. It will probably be the same issue that I wrote up awhile back. Has anybody else had these symptoms? Probably have to break down and start a thread after this if not already documented. Turned out on the bros car to be an engine wall ground terminal that was rusted causing the ecu to act up. Will see tomorrow after a trip down dealer lane.

Other than that, will be waiting for delivery of washer/dryer tomorrow morning, have some under the counter appliances to install. Need some suggestions for the bro's b-day this Thursday 3/15.

Off to Mr. onzedge' house on Sunday for a look into the whirling sound coming from the oil cooler install on the bros car.

Happy Saturday to the Z community!!

Zforce, so glad to hear Hal is doin better! Family is sooo important! I'm not just talking blood relations, close friends can be considered family too!

kenchan · 03-10-2012, 07:14 AM

Hi zforce! Glad to hear your bro is doing well.

Hope you find the solution to the Z issues noted above.

Morning everyone!

I'm off to my first drive in 45.

. Ordered up a new impact 18v milwaukee last night along with full impact set for 3/8 drive. Got tired of chunky 1/2 corded or breaker bar to do clumsy smaller projects.

onzedge · 03-10-2012, 07:28 AM

Quote:

Originally Posted by kenchan

Hi zforce! Glad to hear your bro is doing well.

Hope you find the solution to the Z issues noted above.

Morning everyone!

I'm off to my first drive in 45.

. Ordered up a new impact 18v milwaukee last night along with full impact set for 3/8 drive. Got tired of chunky 1/2 corded or breaker bar to do clumsy smaller projects.

Happy motoring!!!

alcheng · 03-10-2012, 11:59 AM

Quote:

Originally Posted by onzedge

Happy motoring!!!

Heppy Junk Day Mr.onzedge!!

alcheng · 03-10-2012, 12:08 PM

Quote:

Originally Posted by Skeeterbop

I picked up a package for my other hobby. The one in the middle is my new one (new to me, bought it used with a ton of spare parts on another forum). For anyone that is in the hobby as well; from left to right: Team Associated TC6 FT, Corally 10SL WGT, Team Losi XXX-SCT. I have a fourth but since it is being repaired I decided not to include it in the picture

Quote:

Originally Posted by Alchemy

370z body

XR10 is a serious rig. The guy with the red truck above is building a XR10 from the ground up right now. I love crawling, its so much fun. Its AMAZING the terrain it can conquer.

R/C.....

Used to run an on-road indoor track for 1/10th sedan in here Toronto... So much fun and such an addiction.

Streetlife · 03-10-2012, 12:10 PM

Wiped her down with my Four star spray wax, wiped wheels and polished the stainless steel canisters underneath her on my Tanabe exhaust, forgot to do that when i did the tips on a full detail last week.

GaleForce · 03-10-2012, 07:41 AM

Good morning fellow Z'ers.

Have a safe drive Mr.Kenchan

Mr.Onzedge, when are you posting pics of the new Juke?

onzedge · 03-10-2012, 07:45 AM

Quote:

Originally Posted by GaleForce

Good morning fellow Z'ers.

Have a safe drive Mr.Kenchan

Mr.Onzedge, when are you posting pics of the new Juke?

Juke pics will be up this afternoon. We have to go get it in a few hours.

Happy Z day everyone.

Happy Juke day also.

Alchemy · 03-10-2012, 09:24 AM

Quote:

Originally Posted by onzedge

Juke pics will be up this afternoon. We have to go get it in a few hours.

Happy Z day everyone.

Happy Juke day also.

Happy Juke Day.

Quick question regarding the painting of my StopTechs. Im masking them off and I know that I left a bigger section than needed exposed for painting. The first time I drive it the pads should take the excess off without any negative side effects correct?? Im using high temp rotor/caliper paint.

onzedge · 03-10-2012, 09:52 AM

Quote:

Originally Posted by Alchemy

Happy Juke Day.

Quick question regarding the painting of my StopTechs. Im masking them off and I know that I left a bigger section than needed exposed for painting. The first time I drive it the pads should take the excess off without any negative side effects correct?? Im using high temp rotor/caliper paint.

Yep. The pads will take care of the excess paint.

Alchemy · 03-10-2012, 10:08 AM

Quote:

Originally Posted by Skeeterbop

Nice! I had a XR10 but never really got into it much. Some of the money I got selling it is what paid for the new car. The rest will go into a new servo and esc since the stuff i have on hand doesn't fit very well. I also plan on trying to make a quasi mini-me of my car lol, I'm going to be ordering a 370Z body for my TC6

370z body

XR10 is a serious rig. The guy with the red truck above is building a XR10 from the ground up right now. I love crawling, its so much fun. Its AMAZING the terrain it can conquer.

Quote:

Originally Posted by onzedge

Yep. The pads will take care of the excess paint.

Excellent.

Fire · 03-10-2012, 07:49 AM

Morning guys. Have to pick up my pick up LOL Have a good drive Kenman. I'm kinda glad that I'm working this weekend cause yesterday it snowed and the plows where back out spreading salt

Maybe Sun it will rain really hard here and wash that crap off and then we can have a few nice days to

ZeeingAround · 03-10-2012, 08:56 AM

Got the car out of storage yesterday. Even thought it was 31deg, the roads are dry and clear. took a 60mi trip to get gas (4.09 ouch) and pick up some brewing supplies. Going to make some Irish stout today.

Nick911sc · 03-10-2012, 08:58 AM

Quote:

Originally Posted by ZeeingAround

Got the car out of storage yesterday. Even thought it was 31deg, the roads are dry and clear. took a 60mi trip to get gas (4.09 ouch) and pick up some brewing supplies. Going to make some Irish stout today.

Once you got home was it time to go get gas again? j/k

Have fun with your brew!

Srenity · 03-10-2012, 12:54 PM

Quote:

Originally Posted by ZeeingAround

Got the car out of storage yesterday. Even thought it was 31deg, the roads are dry and clear. took a 60mi trip to get gas (4.09 ouch) and pick up some brewing supplies. Going to make some Irish stout today.

I have some homebrew bourbon oak Imperial Stout aging as we speak. I think I am going to let it age for about 6 months or so. I only helped my buddy with the brew he is the brewing mastermind. He actually works for Mendocino brewing and makes some really good brews.

03-10-2012, 12:10 PM	#6 (permalink)
Streetlife Enthusiast Member Join Date: Aug 2009 Location: Texas Posts: 467 Drives: 2012 370z Mont/sport Rep Power: 17	Wiped her down with my Four star spray wax, wiped wheels and polished the stainless steel canisters underneath her on my Tanabe exhaust, forgot to do that when i did the tips on a full detail last week. __________________ Tanabe Medalion Exhaust + Tanabe Y-Pipe, Baker Tuning, K&N Drop-Ins, Z1 Post MAF Tubes, GT-R Button, Nismo Magnetic Oil Drain Plug, CeramiKool Tint 35%, Solar Gard Clearshield Clearbra

03-10-2012, 07:41 AM	#7 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	Good morning fellow Z'ers. Have a safe drive Mr.Kenchan Mr.Onzedge, when are you posting pics of the new Juke? __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-10-2012, 07:49 AM	#12 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Morning guys. Have to pick up my pick up LOL Have a good drive Kenman. I'm kinda glad that I'm working this weekend cause yesterday it snowed and the plows where back out spreading salt Maybe Sun it will rain really hard here and wash that crap off and then we can have a few nice days to __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

03-10-2012, 08:56 AM	#13 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86624	Got the car out of storage yesterday. Even thought it was 31deg, the roads are dry and clear. took a 60mi trip to get gas (4.09 ouch) and pick up some brewing supplies. Going to make some Irish stout today. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

03-10-2012, 07:14 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Hi zforce! Glad to hear your bro is doing well. Hope you find the solution to the Z issues noted above. Morning everyone! I'm off to my first drive in 45. . Ordered up a new impact 18v milwaukee last night along with full impact set for 3/8 drive. Got tired of chunky 1/2 corded or breaker bar to do clumsy smaller projects.