What did you do with your Z today II

kenchan · 01-11-2012, 03:32 PM

dang...!

SPOHN · 01-11-2012, 04:19 PM

Already looking at a chip that adds 60 HP.

brucelidat · 01-11-2012, 04:58 PM

Quote:

Originally Posted by SPOHN

Already looking at a chip that adds 60 HP.

Read this and thought it was some incredible new Z mod before I backtracked and realized it is not, haha.

370ZilverZ · 01-11-2012, 07:06 PM

I put my Z on jackstands and removed the stock air intake system, cats and exhaust system. I was prepared for the Demon Bolt with WD-40 I sprayed on after I removed the air intake tubes and let it soak while I removed the stock exhaust. I bought a set of grip lock sockets and used an array of 1/2" extentions connected to a 1/2" - 3/4" adapter and 3/4" drive ratchet to make sure I wasn't lacking in torque to remove it. I beat the demon bolt, but seemed to have more trouble with the one below it.

onzedge · 01-11-2012, 07:13 PM

Quote:

Originally Posted by daemon1957

I put my Z on jackstands and removed the stock air intake system, cats and exhaust system. I was prepared for the Demon Bolt with WD-40 I sprayed on after I removed the air intake tubes and let it soak while I removed the stock exhaust. I bought a set of grip lock sockets and used an array of 1/2" extentions connected to a 1/2" - 3/4" adapter and 3/4" drive ratchet to make sure I wasn't lacking in torque to remove it. I beat the demon bolt, but seemed to have more trouble with the one below it.

brucelidat · 01-11-2012, 07:13 PM

that's a productive Z day for sure

MJB · 01-11-2012, 07:15 PM

daemon1957, I think a penetrating spray like PB Blaster would be alittle more effective then WD-40 IMO. How long did it take to get the bottom bolt out?

370ZilverZ · 01-11-2012, 07:36 PM

Quote:

Originally Posted by MJB

daemon1957, I think a penetrating spray like PB Blaster would be alittle more effective then WD-40 IMO. How long did it take to get the bottom bolt out?

About 10 minutes after I figured out the correct combination of extention lengths, wobblers and universal joints to run down the left side. About 90 minutes all together. Tomorrow I tackle the crank pulley. I don't know for sure where to start, but this is a great way to get to know and learn the ins and outs of your car.

happytheman · 01-11-2012, 07:36 PM

Quote:

Originally Posted by kenchan

gafternoon, mr. happy. sorry to hear about your garage door.

hope all is okay now.

my garage door spring is probably due for repairs in the coming years. while i didnt open the garage door much the first 10yrs of ownership since my dd's were parked outside, i think in the next 5yrs the spring will give away since im using the garage door every day since last June...

I replaced the spring on mine last summer. It took the spring replacer garage repair dude all of 10 minutes to do. He made it look so easy!

Garage Door springs is something I do not eff with!

onzedge · 01-11-2012, 07:37 PM

Quote:

Originally Posted by happytheman

I replaced the spring on mine last summer. It took the spring replacer garage repair dude all of 10 minutes to do. He made it look so easy!

I tried one once on my own. That was the day when I decided that some things are better left to the people who do them over and over again.

happytheman · 01-11-2012, 07:38 PM

Quote:

Originally Posted by onzedge

I tried one once on my own. That was the day when I decided that some things are better left to the people who do them over and over again.

Haha! I just edited my post to say as much!

onzedge · 01-11-2012, 08:15 PM

Quote:

Originally Posted by happytheman

Haha! I just edited my post to say as much!

SPOHN · 01-11-2012, 08:23 PM

Ordered this. I love simple mods.

NISSAN INFINITI MOBIL 1 CARBON FIBER OIL CAP GUNMETAL | eBay

happytheman · 01-11-2012, 08:52 PM

That's a sweet cap! Hmmmm, simple mods.... Ideas!

brucelidat · 01-11-2012, 09:06 PM

Maybe someone should start a simple mods thread. It'll help us getting our modding fix without blowing the bank for a FI kit, haha.

01-11-2012, 04:19 PM	#137 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Already looking at a chip that adds 60 HP. __________________

01-11-2012, 07:06 PM	#139 (permalink)
370ZilverZ A True Z Fanatic Join Date: Dec 2011 Location: DFW, TX Age: 66 Posts: 2,321 Drives: '11 BMW Z4 Rep Power: 18	I put my Z on jackstands and removed the stock air intake system, cats and exhaust system. I was prepared for the Demon Bolt with WD-40 I sprayed on after I removed the air intake tubes and let it soak while I removed the stock exhaust. I bought a set of grip lock sockets and used an array of 1/2" extentions connected to a 1/2" - 3/4" adapter and 3/4" drive ratchet to make sure I wasn't lacking in torque to remove it. I beat the demon bolt, but seemed to have more trouble with the one below it. __________________ 370ZilverZ Journal BMW Z4

01-11-2012, 07:13 PM	#141 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	that's a productive Z day for sure __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

01-11-2012, 08:23 PM	#148 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Ordered this. I love simple mods. NISSAN INFINITI MOBIL 1 CARBON FIBER OIL CAP GUNMETAL \| eBay __________________

01-11-2012, 08:52 PM	#149 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	That's a sweet cap! Hmmmm, simple mods.... Ideas! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

01-11-2012, 03:32 PM	#136 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	dang...!

01-11-2012, 07:15 PM	#142 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 40 Posts: 1,498 Drives: a POS truck Rep Power: 495	daemon1957, I think a penetrating spray like PB Blaster would be alittle more effective then WD-40 IMO. How long did it take to get the bottom bolt out?

01-11-2012, 09:06 PM	#150 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	Maybe someone should start a simple mods thread. It'll help us getting our modding fix without blowing the bank for a FI kit, haha. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
PSA for today	USMCASA	Nissan 370Z General Discussions	6	08-29-2011 07:08 PM
New Z today!	dbvato	Introduction	16	10-06-2010 05:13 PM
look what I got today!!! :)	irishboy	Australia/New Zealand	16	07-31-2009 12:54 AM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM