Questions about wash & wax

semtex · 05-20-2009, 06:13 PM

Quote:

Originally Posted by edeeZee

What do those run? I'm planning on other things with my funds e.g. Volk wheels and Sparco seats. Uhh, but anysway, my friend got a RX-7 R1 new back in '94. And that thing was notorious for rock chips on the paint. That car was so fragile. I think after the 1st month he owned it, you could see the primer (if it used it) or bare metal beneath the paint.

Might want to review this thread for some good info: What do people think of Clear Bra Paint Protection?

edeeZee · 05-20-2009, 06:25 PM

Quote:

Originally Posted by semtex

Might want to review this thread for some good info: What do people think of Clear Bra Paint Protection?

Already seen it, thanks. I'll stick with traditional black bras probably.

dalparadise · 05-20-2009, 10:28 PM

Bad idea. A vinyl bra will move around in the wind and scratch your car. It's also so 1988.

ocfoilist · 05-21-2009, 02:40 AM

I don't know about other cars, but mine sat in a sea of cars that had been sitting out in a back lot, in the hot sun, with bird crap and abrasive dirt swirling around. Before that, it sat on a dock for a while. Fortunately, a new car is given over to a minimum wage worker to "detail" your car for you when you buy it. For mine, they used a very abrasive wheel cleaner, which stained the clearcoat around the wheel wells. As I ran my hand over the paint, I could feel the fine grit and it didn't just wipe off with a microfibre cloth. The whole "detailing" process took 15 minutes while I waited in the office.

So, to me, the best option was to start from the beginning with a full detailing process. That way I know that I'm not just waxing over months of dirt, tar, bird poop and so forth. Unfortunately, I don't have a lot of faith that the quick water rinse that the minimum wage worker uses once a week while on the lot...

DarinFred · 05-21-2009, 07:46 AM

Get a Zaino kit and follow the directions...nuff said.

SiXK · 05-21-2009, 12:51 PM

Quote:

Originally Posted by DarinFred

Get a Zaino kit and follow the directions...nuff said.

+1

b534202 · 05-22-2009, 03:14 AM

Quote:

Originally Posted by ocfoilist

I don't know about other cars, but mine sat in a sea of cars that had been sitting out in a back lot, in the hot sun, with bird crap and abrasive dirt swirling around. Before that, it sat on a dock for a while. Fortunately, a new car is given over to a minimum wage worker to "detail" your car for you when you buy it. For mine, they used a very abrasive wheel cleaner, which stained the clearcoat around the wheel wells. As I ran my hand over the paint, I could feel the fine grit and it didn't just wipe off with a microfibre cloth. The whole "detailing" process took 15 minutes while I waited in the office.

So, to me, the best option was to start from the beginning with a full detailing process. That way I know that I'm not just waxing over months of dirt, tar, bird poop and so forth. Unfortunately, I don't have a lot of faith that the quick water rinse that the minimum wage worker uses once a week while on the lot...

That's why when you buy a car, you need to special order it, and then specifically them them not to wash/detail the car. Otherwise the paint would be ruined forever.

VCuomo · 05-22-2009, 03:41 PM

Quote:

Originally Posted by b534202

That's why when you buy a car, you need to special order it, and then specifically them them not to wash/detail the car. Otherwise the paint would be ruined forever.

Please...

05-21-2009, 02:40 AM	#4 (permalink)
ocfoilist Base Member Join Date: Apr 2009 Location: Orange County, CA Posts: 202 Drives: 09 Blue 6m 370zT/S/N Rep Power: 18	I don't know about other cars, but mine sat in a sea of cars that had been sitting out in a back lot, in the hot sun, with bird crap and abrasive dirt swirling around. Before that, it sat on a dock for a while. Fortunately, a new car is given over to a minimum wage worker to "detail" your car for you when you buy it. For mine, they used a very abrasive wheel cleaner, which stained the clearcoat around the wheel wells. As I ran my hand over the paint, I could feel the fine grit and it didn't just wipe off with a microfibre cloth. The whole "detailing" process took 15 minutes while I waited in the office. So, to me, the best option was to start from the beginning with a full detailing process. That way I know that I'm not just waxing over months of dirt, tar, bird poop and so forth. Unfortunately, I don't have a lot of faith that the quick water rinse that the minimum wage worker uses once a week while on the lot... __________________ Proud owner of a new 167.2 inch, 3278 lb baby Z! Stillen CBE & G3 Intake // Stillen Lightweight pulley // Stillen Oil Cooler // Goodridge Braided Stainless Steel Brake Lines // ACT HDSS Clutch& Alum Flywheel

05-21-2009, 07:46 AM	#5 (permalink)
DarinFred Base Member Join Date: Mar 2009 Location: Tucson, AZ Posts: 30 Drives: 09 Nissan 370Z MB M6 Rep Power: 18	Zaino Get a Zaino kit and follow the directions...nuff said.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Hand Auto Wash & Detailing Spot in NJ	zcoupe09	North East Region	1	06-14-2009 09:40 PM
My new hand wash and detailing center...	zcoupe09	Nissan 370Z General Discussions	0	05-12-2009 01:09 PM
Couple of questions.	alvinmathew88	Nissan 370Z General Discussions	2	03-15-2009 04:10 PM
Aftermarket Nav Questions	DarinFred	Audio & Video	6	03-08-2009 05:30 PM
New Order Questions	streetrod	Nissan 370Z Pricing / Ordering Discussions	5	03-06-2009 07:00 PM

05-20-2009, 10:28 PM	#3 (permalink)
dalparadise The370Z.com Sponsor Join Date: May 2009 Location: Houston Posts: 354 Drives: 2010 Z Roadster T/S Rep Power: 18	Bad idea. A vinyl bra will move around in the wind and scratch your car. It's also so 1988.