Question about Rhino Ramps

nmjaxx9 · 10-29-2012, 11:56 AM

I use rhino ramps as well, no probs, just put something in front of them to support and it should be all good.

wdkwang · 10-30-2012, 09:31 PM

I have the fatter Rhino ramps and they work great. I'm on stock height and for you to clear the bumper, you have to keep the ramps a bit off-center so it just rubs the rubber flaps.

RUFFSTUFF · 04-28-2014, 09:19 AM

Operator error.

mab864 · 04-28-2014, 10:05 AM

As a different option... I tried the rhino ramps too but they scooted across my garage floor so I bagged that idea and invested in a really high quality set of jack stands. They are ESCO brand and have a rubber pad on the top, really heavy pin locks, and have a 6K capacity per pair. They were expensive but the car is extremely stable on them. I put my floor jack with a modified hockey puck under the front jack point and lift one side of the car. I set both jack stands on that side, then go to the other side of the car, lift and set both jack stands on that side of the car. It takes me about 5 minutes and the entire car is off the ground. And it's rock solid... I'd have no problem sleeping under there. Just another option.

onzedge · 04-28-2014, 10:08 AM

Quote:

Originally Posted by mab864

As a different option... I tried the rhino ramps too but they scooted across my garage floor so I bagged that idea and invested in a really high quality set of jack stands. They are ESCO brand and have a rubber pad on the top, really heavy pin locks, and have a 6K capacity each. They were expensive but the car is extremely stable on them. I put my floor jack with a modified hockey puck under the front jack point and lift one side of the car. I set both jack stands on that side, then go to the other side of the car, lift and set both jack stands on that side of the car. It takes me about 5 minutes and the entire car is off the ground. And it's rock solid... I'd have no problem sleeping under there. Just another option.

10-30-2012, 09:31 PM	#2 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 21	I have the fatter Rhino ramps and they work great. I'm on stock height and for you to clear the bumper, you have to keep the ramps a bit off-center so it just rubs the rubber flaps. __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

04-28-2014, 09:19 AM	#3 (permalink)
RUFFSTUFF Base Member Join Date: Apr 2012 Location: GEORGIA Posts: 233 Drives: 2012 370Z TOURING Rep Power: 14	Operator error. Chuck33079 likes this. __________________ 2012 370Z Touring w/ NAV, Black Powdercoat, aFe Takeda CAI, Invidia Gemini Ti-tip Catback Exhaust, DVD/NAV bypass

04-28-2014, 10:05 AM	#4 (permalink)
mab864 Enthusiast Member Join Date: Nov 2013 Location: Oregon Posts: 482 Drives: 13 Sport 6MT Rep Power: 12	As a different option... I tried the rhino ramps too but they scooted across my garage floor so I bagged that idea and invested in a really high quality set of jack stands. They are ESCO brand and have a rubber pad on the top, really heavy pin locks, and have a 6K capacity per pair. They were expensive but the car is extremely stable on them. I put my floor jack with a modified hockey puck under the front jack point and lift one side of the car. I set both jack stands on that side, then go to the other side of the car, lift and set both jack stands on that side of the car. It takes me about 5 minutes and the entire car is off the ground. And it's rock solid... I'd have no problem sleeping under there. Just another option. __________________ Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R, 324 whp & 262 torque Last edited by mab864; 04-28-2014 at 10:17 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Race Ramps 56" 2 piece ramps	Glokwork	Nissan 370Z General Discussions	16	07-08-2011 09:09 AM
DIY Ramps	zzdudaka	DIY Section (Do-It-Yourself)	0	04-18-2011 03:51 PM
Need Race Ramps service ramps and trailer ramps? Save hundreds with this combo deal.	Fred@ReverseLogic	Tools / Ramps	1	03-04-2011 07:13 AM
NEW from Race Ramps - Two-Piece, Two-Stage Incline Race Ramps	Fred@ReverseLogic	Tools / Ramps	2	02-03-2011 09:27 PM
Race Ramps Question	Zeester	Nissan 370Z General Discussions	27	07-12-2010 04:39 PM

10-29-2012, 11:56 AM	#1 (permalink)
nmjaxx9 A True Z Fanatic Join Date: Jul 2011 Location: Middletown, Ct Posts: 5,853 Drives: 2011 Nissan 370z Rep Power: 27	I use rhino ramps as well, no probs, just put something in front of them to support and it should be all good.