Oil Cooler Install Thread

[ResIpsa]

Has anyone considered placing the oil cooler in a different position than two inches in front of the radiator?

I noticed that on the pre-production 370Z’s the oil cooler was positioned in the front driver side wheel wells. The driver side fang cover was removed and large slots were cut into the wheel well to exhaust the hot air.

Another thought was to create a bracket extending the oil cooler farther away from the radiator and removing the fang cover. Then you could cut the portion of the engine bay air divider directly below the bumper allowing a path for air into the wheel well. All that would be left is to cut slots in the driver side wheel well and create a wind baffle between the oil cooler and radiator directing air to the wheel well. The oil cooler would still get air from the main grill and the fang opening should provide some direct air and maybe a venturi effect drawing hot air into the wheel well.

I used my best paint skills to create a crude sketch.