11-13-2010, 04:34 PM
|
#25 (permalink)
|
|
Base Member
Join Date: Nov 2010
Location: Yellowknife
Posts: 9
Drives: 09 370z PG M6
Rep Power: 15
|
Quote:
Originally Posted by TongMan
After thinking about bypassing the clutch pedal, I've come to realize that it would be absurd to bypass it. Bypassing the clutch would mean that the driver can start the car by a push of the start/stop button. But, that would mean that it would be impossible to go into ACC mode and ON mode. So, in summary, DO NOT bypass the clutch in your 370z.
|
To completely bypass it would be not so smart not to mention the fact that all switches are monitored by the BCM and ECM. As soon as the car moves above 40kmh for a certain duration and does not see the switch positions changing(ie shifting gears) the car starts to throw codes. Its all in the service manual.
Yet i think you might have missed the part where i said i was installing a remote start on my 6MT. That being said i am not "bypassing" the clutch switches(you cant without getting codes nonstop) the remote start will send out a signal to a pair of relays to "simulate" the clutch being pressed, and only for the duration of the start cycle. Once the car is up and running the relays go back to normal and all functions as per normal. interfacing with the push button, interlock switch, pedal position switch, as well as neutral switch takes a series of 5 relays. all non functioning when the remote start is not entering the start sequence. You can still use ACC and ON mode in my car. I may post my relay wiring diagram at a later date once i get everything finished up.
cheers
|
|
|
Similar Threads
Threaded Mode
