New toys from the Z store...

PapoZalsa · 10-24-2010, 07:41 PM

I got the front lip EVO-R (three pieces) FRP test fitted(installled) and installed the rear solar hatch wing. More pics later.

Thanks to my friend Sam (Darkpath).

Pretty nice fit for a three piece lip. The center piece has a gap from the side ones. Not too noticeable on the pics.

Now I need to decide the paint sceme for the like with the grill or the front lip only. So many ideas but most of them already taken.

While on jack stand

Kcuba370z · 10-24-2010, 07:42 PM

lookin good

Trips · 10-24-2010, 07:43 PM

Looks Great!

I wouldn't paint it.

PapoZalsa · 10-24-2010, 07:50 PM

Quote:

Originally Posted by Triple's

Looks Great!

I wouldn't paint it.

I will paint it for a little protection, but is going to be matte black, my indecesion in on the sharks, matte black or leave it like they are because they already have clear bra installed.

jaedub · 10-24-2010, 08:36 PM

looks nice but your license plate should be installed somewhere else (though it looks nice). Its blocking half the air that has to go through the vent. Use the factory given plate installation kit

dropped1 · 10-24-2010, 08:44 PM

Looks good! Can't wait to see that lip in person.

PapoZalsa · 10-24-2010, 08:45 PM

Quote:

Originally Posted by jaedub

looks nice but your license plate should be installed somewhere else (though it looks nice). Its blocking half the air that has to go through the vent. Use the factory given plate installation kit

You have not read my thread them from last year. Plus I hate from license plates and here you need to have one and I don't want any holes in my front bumper.

Bumper was replaced. Here are little pics:

PapoZalsa · 10-24-2010, 09:49 PM

Quote:

Originally Posted by dropped1

Looks good! Can't wait to see that lip in person.

The CF would look good for your car.

dropped1 · 10-24-2010, 09:54 PM

That's what the plan was -- the one piece CF lip. I saw the side profile pic in the other thread...didn't like how it looked. But now I get to see it in person!

Also, I don't think the Stillen plate bracket causes that big of a reduction in air flow to be worried about. Friends don't let friends drill bumpers!

Sunsational04 · 10-24-2010, 10:00 PM

looks good!! such a good color

PapoZalsa · 10-24-2010, 10:17 PM

Quote:

Originally Posted by dropped1

That's what the plan was -- the one piece CF lip. I saw the side profile pic in the other thread...didn't like how it looked. But now I get to see it in person!

Also, I don't think the Stillen plate bracket causes that big of a reduction in air flow to be worried about. Friends don't let friends drill bumpers!

But this one is a EVO-R three piece from Motorsport. You are going to be surprise when I tell you how much I paid, compare with the other ones.

PM me your email and I send you the link.

Boost_lee · 10-24-2010, 10:30 PM

bahh u beat me to the install

looks great

djpathfinder · 10-24-2010, 11:05 PM

Quote:

Originally Posted by PapoZalsa

I will paint it for a little protection, but is going to be matte black, my indecesion in on the sharks, matte black or leave it like they are because they already have clear bra installed.

I think you should black out the fangs too...that will look good and go very well with the matte black lip. Also, do you think the lip would look better if you take off the OEM chin spoiler?

BeachZTT · 10-25-2010, 09:43 AM

Looks great Jose!

Talked to Sam briefly yesterday and he told me you guys had been working on it.

doubleG370Z · 10-25-2010, 10:26 AM

Quote:

Originally Posted by PapoZalsa

But this one is a EVO-R three piece from Motorsport. You are going to be surprise when I tell you how much I paid, compare with the other ones.

PM me your email and I send you the link.

I was looking at the CF one b/c it's 3 pieces shipping is cheaper...how was installing it? thxs for pics.

10-24-2010, 07:41 PM	#1 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4499	New toys from the Z store... I got the front lip EVO-R (three pieces) FRP test fitted(installled) and installed the rear solar hatch wing. More pics later. Thanks to my friend Sam (Darkpath). Pretty nice fit for a three piece lip. The center piece has a gap from the side ones. Not too noticeable on the pics. Now I need to decide the paint sceme for the like with the grill or the front lip only. So many ideas but most of them already taken. While on jack stand __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

10-24-2010, 07:43 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Looks Great! I wouldn't paint it. __________________

10-24-2010, 08:44 PM	#6 (permalink)
dropped1 Enthusiast Member Join Date: Dec 2009 Location: VA Beach Posts: 302 Drives: SOLD 40th Z #104 Rep Power: 258	Looks good! Can't wait to see that lip in person. __________________ Aaron Do you own a 40th anniversary? Join the club!

10-24-2010, 09:54 PM	#9 (permalink)
dropped1 Enthusiast Member Join Date: Dec 2009 Location: VA Beach Posts: 302 Drives: SOLD 40th Z #104 Rep Power: 258	That's what the plan was -- the one piece CF lip. I saw the side profile pic in the other thread...didn't like how it looked. But now I get to see it in person! Also, I don't think the Stillen plate bracket causes that big of a reduction in air flow to be worried about. Friends don't let friends drill bumpers! __________________ Aaron Do you own a 40th anniversary? Join the club!

10-25-2010, 09:43 AM	#14 (permalink)
BeachZTT Track Member Join Date: Jul 2009 Location: Colorado Posts: 746 Drives: '10 BC ZR T/S/Nav Rep Power: 16	Looks great Jose! Talked to Sam briefly yesterday and he told me you guys had been working on it. __________________ '10 ZR Black Cherry Sport/Touring/Nav, Swift Springs, Stillen G3s, 15mm-F 20mm-R Spacers, SPC, Spoiler Solutions Rear Wing, Stubby Antenna

10-24-2010, 07:42 PM	#2 (permalink)
Kcuba370z Enthusiast Member Join Date: Aug 2010 Location: New York Posts: 340 Drives: Z34 Rep Power: 14	lookin good

10-24-2010, 08:36 PM	#5 (permalink)
jaedub Track Member Join Date: Aug 2010 Location: Los Angeles Posts: 906 Drives: 2010 Black 370Z MT Rep Power: 304	looks nice but your license plate should be installed somewhere else (though it looks nice). Its blocking half the air that has to go through the vent. Use the factory given plate installation kit

10-24-2010, 10:00 PM	#10 (permalink)
Sunsational04 Administrative Assistant Join Date: Oct 2008 Location: Galloway, NJ Posts: 1,937 Drives: 2019 430xi BMDUBBB Rep Power: 2684373	looks good!! such a good color

10-24-2010, 10:30 PM	#12 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	bahh u beat me to the install looks great

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who's into RC gear? Post up your toys.	Juleous	The Lounge (Off Topic)	20	09-04-2010 01:51 AM
San Antonio Cars, Coffee and Toys 11/28	300twinz	Texas	7	11-29-2009 02:21 PM
New Toys	Shift	Wheels & Tires	12	06-21-2009 04:29 PM
Toys That Happen to Look Like Celebrities	nogoodname	The Lounge (Off Topic)	5	06-20-2009 08:07 PM