New problem after I tinted my windows

JB1

When I got my windows tinted the guy unbolted the door switch, the little push button that is pushed in when the door is closed. When you open the door the button pops out and this activates the interior light and your auto window roll down. My advise is to check this button. If it's loose it won't function properly and your window won't roll down when you open the door. Open the drivers side door, look at the middle of the door frame,'right hand side. Just behind the u shaped clamp that holds the door you'll see a rubber button, that's the one.

__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //

Matt

Try this first. This function is normally disabled by an auto installed so that the window is fully up when the door is open. He may have left it disabled.

Then do the window reset again. Just because they go up and down fine doesn't mean the reset won't fix your problem.

Good luck!

__________________

"Any man who can drive a 370z while kissing a pretty girl is simply not giving the Z the attention it deserves." Albert Einstein....modified.

4r3s

Had the same issue, this was the solution, just had to tighten the screw back down.

Juruki

Thx man! you were right. I confirmed it was that little rubber push button because when my driver door is open the interior lights dont light up.
It still sucks that i have to drive where i got my tints done cuz i dont know how to fix it...

JB1

Glad I could help. Shouldn't be to hard to fix yourself. First check if it's screwed in tight, it's just a Phillips head screw holding the button to the door frame. If it is tight, unscrew it again, take it out and see if the plug in the back is plugged in correctly. It's just a simple switch, can't be to much more wrong with it then those two things. If that doesn't solve it. take the button from the passenger side and put it in the drivers side. If that works you know the button is caput...

__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //