I went with the economical Tru-Cool option, but it seems like a really low quality product. It works, but it's flimsy with a minimal frame/mounting flange and the NPT threads
|
|
LinkBack | Thread Tools | Display Modes |
|
07-19-2010, 03:11 PM | #1 (permalink) |
A True Z Fanatic
|
Anyone use Earl's Oil Coolers?
I went with the economical Tru-Cool option, but it seems like a really low quality product. It works, but it's flimsy with a minimal frame/mounting flange and the NPT threads are an unnecessary PITA. One of the NPT fittings is weeping ever so slightly, and I'm considering swapping the cooler for something of higher quality. The three I've looked at are Earl's, Mocal, and Setrab 25 row coolers. All of them offer AN fittings directly on the cooler which would be very nice. The Setrab runs $260, Mocal $215, and Earl's $160-199. I feel like I've been burned once going the 'cheap' route (the Tru-cool costs $40). Has anyone used the Earl's cooler and been happy with the build quality? Otherwise I'm going to get the Mocal I think.
__________________
2013 Cadillac V-Wagon, RIP Z |
07-19-2010, 03:51 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976 |
Huh? The Tru-cool is inexpensive yes, cheap and flimsy? I'm gonna have to disagree. It is more than substantial enough for this, or any application. I think you need to chalk your troubles up to installer difficulties, not faults with the parts. Lots of guys have put this exact cooler in. I've used one for 8 years on 2 different cars...
If you have a seep it's because you didn't seal things correctly. I had a seep on my first pass too, which is why I recommended the High Temp sealant I did in the DIY. Last edited by Modshack; 07-19-2010 at 04:15 PM. |
07-19-2010, 04:14 PM | #3 (permalink) |
A True Z Fanatic
|
Easy Steve, I'm not knocking the Tru-Cool as a viable option. It's cooling the oil well, and if there wasn't a bit of weeping at the one fitting, I'd be 100% satisfied. The price is certainly right at $40. However, the 'one time' crank down of the NPT fittings to get them pointing in the preferred direction screwed me. After speaking with the company, it looks like a bad batch of Permatex thread sealant is the probably culprit. I emailed Permatex and they believe it could be past its shelf-life. So I have a slight weep from one NPT fitting on the cooler. Having had to crank the fitting to align it properly was, as you noted, a one-timer. I can't just unscrew it and try again. The other cooler options (Earls, Mocal, Setrab) are available with -AN fittings directly on the cooler. This should make it easy to reinstall the fittings if ever necessary. Also, they have more robust mounting brackets.
While the Tru-Cool certainly stands up to the cooling job, I'm amazed you don't find it flimsy. Seriously, one finger is all it takes to push on the mounted cooler and bend its mounting flange.
__________________
2013 Cadillac V-Wagon, RIP Z |
07-19-2010, 06:12 PM | #4 (permalink) | |
A True Z Fanatic
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976 |
Quote:
Sure you can. I think you misunderstood my "one time" statement. Once you get it in position you don't want to move it again and break the seal. Since your seal is not sealing, There's no reason you can't unscrew it, clean and reapply the correct sealant as long as you haven't ripped the threads out of the cooler from over torquing......I re-did mine with no issues, and recently took apart one put together 8 years ago (to my design) because we had to reinstall it on a different side of the car and re-orient the fittings 90 degrees.. No leaks, no problems. And NO, I don't find it flimsy.. Last edited by Modshack; 07-19-2010 at 06:51 PM. |
|
07-19-2010, 10:51 PM | #7 (permalink) |
Track Member
Join Date: May 2009
Location: Las Vegas
Posts: 578
Drives: N/A
Rep Power: 17 |
I agree with modshack, i have the tru-cool as well and I questioned why they made the brackets/tabs so sturdy because it was rock solid. the fins on this thing are stronger than my stock radiator.
are we talking about the same cooler? although in terms of cooling efficiency, i'll admit the setrab or mocal would probably run a bit cooler. Last edited by Cjanik; 07-19-2010 at 10:54 PM. |
07-20-2010, 10:10 AM | #10 (permalink) | |
A True Z Fanatic
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976 |
Quote:
FYI, Not sure you'll get much benefit from that. I had this set-up on my Audi and couldn't really measure any significant changes in Oil temps. Oil temp gauge barely moved. The fans are really noisy (Spal 6.5") and seem to block enough of the natural flow when off to offer no net benefit. Last edited by Modshack; 07-20-2010 at 10:22 AM. |
|
07-20-2010, 10:54 AM | #15 (permalink) | |
A True Z Fanatic
Join Date: Mar 2009
Location: Greenville NC
Posts: 2,883
Drives: 370Z Sport
Rep Power: 976 |
Quote:
That mister setup was triggered based on temp differentials electronically so it didn't trigger a lot or use much fluid... Was for a Turbo Intercooler BTW which has a lot of mass and tends to scrub off heat pretty effectively on it's own. It was a (Mod) science experiment... |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need information about oil coolers | Vegitto-kun | Engine & Drivetrain | 15 | 07-01-2010 05:03 PM |
ARC Oil Coolers for 370z Z34 12.30.08 | AK370Z | Engine & Drivetrain | 27 | 03-03-2010 02:42 AM |
Seat Coolers?? | DooDooBrown | Nissan 370Z General Discussions | 6 | 09-05-2009 11:22 PM |
Engine Oil Coolers | freddiebear | Nissan 370Z General Discussions | 27 | 06-09-2009 10:06 PM |
Oil changes with coolers? | wstar | Engine & Drivetrain | 2 | 04-26-2009 08:07 AM |