What did you do with your Z today

onzedge · 11-25-2011, 01:12 PM

Quote:

Originally Posted by kenchan

pumped up the tires to 42.7psi since a tad over 40F today in my garage and placed my Z on flatstoppers. also cleaned the interior glass and wiped off any remaining water. cleaned the jack points since i saw some salt on there from a few days ago's drive.

will need to let her dry another couple of days before covering her. it's a tad too humid today. i dont plan on taking out my G or Z remaining of the weekend so garage will be closed until monday... not worried about dust.

also cleaned up my garage a little bit... removed space heaters and stuff since i wont be doing any work inside the garage this winter. the heat from the G's engine after the commute will keep the garage warm enough to do some SprayOn CarWash.

also placed my deep-cycle battery (optima yellow) on my regular charger using 2A to see if i can revive it. last winter i tried charging it but the charger kept giving me errors cause it was probably too cold.

Quote:

Originally Posted by ZForce

Pulled the trigger on two oil coolers from Z1 - Black Friday Sale !!

kenchan · 11-25-2011, 01:20 PM

Quote:

Originally Posted by Alchemy

I love the Ings. I just cant justify $500 or whatever it is for a lip Im gonna scrape up. The Stillen would have been a cheap alternative.

yah, i can see that if lowered. ive not scrapped once yet at stock height.

Quote:

Originally Posted by onzedge

hello, mr.onzedge.

thanks to the whole chicken (vs turkey), we ate the rest for lunch (made club sandwiches and stuff) and im not sick of it.

Baer383 · 11-25-2011, 01:21 PM

I got my engine strut brace back from Mike the powder coater.

I welded in some steel in the same place that the Nismo engine brace has it, beats buying it,it came out good satin gray.

LakeShow · 11-25-2011, 06:42 PM

Got it tinted....Sorry car is dirty

SPOHN · 11-25-2011, 07:30 PM

Quote:

Originally Posted by Baer383

I got my engine strut brace back from Mike the powder coater.

I welded in some steel in the same place that the Nismo engine brace has it, beats buying it,it came out good satin gray.

Pics or it didn't happen.

Mike is going to do mine soon, along with the intakes.

Baer383 · 11-25-2011, 07:56 PM

Quote:

Originally Posted by SPOHN

Pics or it didn't happen.

Mike is going to do mine soon, along with the intakes.

here you go

11-25-2011, 01:21 PM	#3 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 32	I got my engine strut brace back from Mike the powder coater. I welded in some steel in the same place that the Nismo engine brace has it, beats buying it,it came out good satin gray. __________________ 2013 ZL1 754 rwhp 747 rwtq

11-25-2011, 06:42 PM	#4 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 27	Got it tinted....Sorry car is dirty __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\| Last edited by LakeShow; 11-25-2011 at 06:48 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM