What did you do with your Z today

kenchan · 09-03-2011, 06:31 PM

Quote:

Originally Posted by LT419

Drove it to Home Depot to get a new Makita impact driver.

sounds good. which one did you get?

i have their little 12v driver and it's powerful for such a small drive.

ive been using my milwaukee 18v compact driver but the makita 12v can pretty much handle most tasks as long as it's not a long project. and it's small so great for car interior projects.

LT419 · 09-03-2011, 06:42 PM

Quote:

Originally Posted by kenchan

sounds good. which one did you get?

i have their little 12v driver and it's powerful for such a small drive.

ive been using my milwaukee 18v compact driver but the makita 12v can pretty much handle most tasks as long as it's not a long project. and it's small so great for car interior projects.

18V. Might be overkill but it wasn't too expensive so I'm happy.

FromG2Z · 09-03-2011, 06:44 PM

Quote:

Originally Posted by kenchan

YAAAAWWN!!!

lol i dont need detailing lessons G2Z.

Lol... I suppose ur right. Preaching to choir I guess. Still I just cringed... Forgive me.

No z for me today... Been raining all day since yesterday

BajaZ · 09-03-2011, 07:29 PM

its finally here !! installing it tomorrow

kenchan · 09-03-2011, 08:18 PM

Quote:

Originally Posted by FromG2Z

Lol... I suppose ur right. Preaching to choir I guess. Still I just cringed... Forgive me.

No z for me today... Been raining all day since yesterday

no sweat!

yah, i am extremely careful with that stuff. there's a special plush MF towel that i use with the no-rinse and i only make one pass while i kinda roll the towel in my hand to ensure only the clean part of the towel makes contact with the grit and dont drag it. if the car drove through rain obviously i wont use this stuff, but if it's only some puddles i use it as a super-lubricity QD.

it's quite safe if one uses it correctly.

Quote:

Originally Posted by Zmaster

its finally here !! installing it tomorrow

cool!

LunaZ · 09-03-2011, 08:51 PM

Motored out to Shakedown BBQ for some ribs.

PapoZalsa · 09-03-2011, 09:14 PM

Not a damn thing today or tomorrow. Post-Hurricane cleaning the backyard and house...I'm freaking tired and still have more to do tomorrow and Monday.

BeachZTT · 09-03-2011, 10:02 PM

Hey everyone!!! Hope everyone had a great Z day. Put almost 500 miles on the roadster today. Perfect top down day but I am exhausted. We went to watch my daughter play vball at GMU. They won both matches today. I am too exhausted to even read the posts above...

I will catch up tomorrow.

FromG2Z · 09-03-2011, 10:26 PM

same here Beach... too many posts too fast!

Tomorrow or maybe labor day, I plan to change her oil for the 2nd time. Amsoil FTW!

kenchan · 09-04-2011, 07:22 AM

Quote:

Originally Posted by LT419

18V. Might be overkill but it wasn't too expensive so I'm happy.

for impacts best to have higher power rating for cordless imo so 18v sounds gooood!

onzedge · 09-04-2011, 08:09 AM

Quote:

Originally Posted by kenchan

for impacts best to have higher power rating for cordless imo so 18v sounds gooood!

18v is the way to go on cordless stuff in general. For impacts, though, I use air tools. Thanks, Harbor Freight.

Good Sunday, Mr. Kenchan!!!

Nick911sc · 09-04-2011, 08:37 AM

So I didn't really get a chance to post at all in depth since I got my exhaust. One thing about it that I'm curious about.

The new Berk units are supposed to be made with adjustable tips. Mine came with tips welded, not adjustable. So did Berk go back after all the complaining about protruding, uneven tips that the owner needs to cut in order to fit properly? Or did I get inventory from the prior batch? Honestly, I don't care, the exhaust sounds amazing and fitment was 100% perfect, tips aren't too tucked and don't stick out too much either.

BeachZTT · 09-04-2011, 09:03 AM

OK guys, here is the deal... I composed and responded to a bunch of posts Friday morning and apparently forgot to submit.

I went back hours later to find that my post hadn't been posted. My day was so hectic that I didn't bet back to it and yesterday we were on the road all day.

Anyway, while we were driving to GMU, we passed a building that I thought would make a great shot background. After about five miles, I couldn't stand it and had to drive back. We were in a hurry cause we were running late as always, but my wife is a great sport. I only took 6 shot with no setup but we will be going back to this place for a proper shoot sometime soon.

FromG2Z · 09-04-2011, 09:25 AM

Nice shots Beach! I wish we had some graffiti like that!!!

What editing tool do you use btw?

Z activities for me today:

Got up at 5:30 am to change my oil! Used Amsoil 5w-30, about 5-1/4 qts, filled to the dot by the "H". Official mileage: 2463. I sure hope Amsoil helps with oil temps. Maybe bring it down to 220 tops? or maybe even 215? Anyone here can vouche for the Amsoil oil temps?

Btw, do you guys remember my post about that strap wrench that worked wonders on my stock shift knob removal? Well, I officially REALLY love that thing... esp for removing the oil filter. Paired with my cordless 18V drill with 10mm socket, plus my 1/2 drive and 14mm, I got my oil change done in about 45 mins! woot woot.

Z is now officially ready for my date with my wife today! Perfect weather here today, 72 for a high, babysitter coming at 12:30! woootwoooooot..... might go watch Apollo 18.

Nick911sc · 09-04-2011, 09:35 AM

G2Z

What temps are you seeing now for normal driving?

I'm using Agip synthetic in my Z and my temps are below 220 for normal driving(lower than original oil from Nissan).

09-03-2011, 09:14 PM	#5977 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4499	Not a damn thing today or tomorrow. Post-Hurricane cleaning the backyard and house...I'm freaking tired and still have more to do tomorrow and Monday. __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

09-03-2011, 10:02 PM	#5978 (permalink)
BeachZTT Track Member Join Date: Jul 2009 Location: Colorado Posts: 746 Drives: '10 BC ZR T/S/Nav Rep Power: 16	Hey everyone!!! Hope everyone had a great Z day. Put almost 500 miles on the roadster today. Perfect top down day but I am exhausted. We went to watch my daughter play vball at GMU. They won both matches today. I am too exhausted to even read the posts above... I will catch up tomorrow. __________________ '10 ZR Black Cherry Sport/Touring/Nav, Swift Springs, Stillen G3s, 15mm-F 20mm-R Spacers, SPC, Spoiler Solutions Rear Wing, Stubby Antenna

09-03-2011, 10:26 PM	#5979 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	same here Beach... too many posts too fast! Tomorrow or maybe labor day, I plan to change her oil for the 2nd time. Amsoil FTW! __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

09-04-2011, 09:03 AM	#5983 (permalink)
BeachZTT Track Member Join Date: Jul 2009 Location: Colorado Posts: 746 Drives: '10 BC ZR T/S/Nav Rep Power: 16	OK guys, here is the deal... I composed and responded to a bunch of posts Friday morning and apparently forgot to submit. I went back hours later to find that my post hadn't been posted. My day was so hectic that I didn't bet back to it and yesterday we were on the road all day. Anyway, while we were driving to GMU, we passed a building that I thought would make a great shot background. After about five miles, I couldn't stand it and had to drive back. We were in a hurry cause we were running late as always, but my wife is a great sport. I only took 6 shot with no setup but we will be going back to this place for a proper shoot sometime soon. __________________ '10 ZR Black Cherry Sport/Touring/Nav, Swift Springs, Stillen G3s, 15mm-F 20mm-R Spacers, SPC, Spoiler Solutions Rear Wing, Stubby Antenna Last edited by BeachZTT; 09-04-2011 at 11:02 AM.

09-04-2011, 09:25 AM	#5984 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	Nice shots Beach! I wish we had some graffiti like that!!! What editing tool do you use btw? Z activities for me today: Got up at 5:30 am to change my oil! Used Amsoil 5w-30, about 5-1/4 qts, filled to the dot by the "H". Official mileage: 2463. I sure hope Amsoil helps with oil temps. Maybe bring it down to 220 tops? or maybe even 215? Anyone here can vouche for the Amsoil oil temps? Btw, do you guys remember my post about that strap wrench that worked wonders on my stock shift knob removal? Well, I officially REALLY love that thing... esp for removing the oil filter. Paired with my cordless 18V drill with 10mm socket, plus my 1/2 drive and 14mm, I got my oil change done in about 45 mins! woot woot. Z is now officially ready for my date with my wife today! Perfect weather here today, 72 for a high, babysitter coming at 12:30! woootwoooooot..... might go watch Apollo 18. __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

09-04-2011, 08:37 AM	#5982 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	So I didn't really get a chance to post at all in depth since I got my exhaust. One thing about it that I'm curious about. The new Berk units are supposed to be made with adjustable tips. Mine came with tips welded, not adjustable. So did Berk go back after all the complaining about protruding, uneven tips that the owner needs to cut in order to fit properly? Or did I get inventory from the prior batch? Honestly, I don't care, the exhaust sounds amazing and fitment was 100% perfect, tips aren't too tucked and don't stick out too much either.

09-04-2011, 09:35 AM	#5985 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	G2Z What temps are you seeing now for normal driving? I'm using Agip synthetic in my Z and my temps are below 220 for normal driving(lower than original oil from Nissan).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM