Originally Posted by happytheman (Post 1439068)

You may need to twist the spring, as it may not be seated properly.

Originally Posted by Srenity (Post 1439171)

Right now I am thinking that it may be the front sway bar endlink. The noise is only at low speeds and seems consitant with some issues I read on other treads. I will check that out when I get some time. Any other potential low speed only clunk causers?

Originally Posted by happytheman (Post 1439174)

Kool, thanks Skeeter! :tup:

Originally Posted by ZForce (Post 1438908)

oh...gotcha. The G must get a winter beating with the weather you have. I would be buying it in bulk (5 gallon plus) if they sell it in that size...shipping would be thru the ceiling though. And I thought I was bad cleaning the Z every weekend 9 months out of the yeaar, but between you and Mr onzedge I think you two should have your our own network detail show. :tiphat:

Originally Posted by Waizzz (Post 1439057)

Freezed my azz off driving home after carpool. Leaving for the gym in an hour :tup:

Loving the mini toolbox kenchan!

Originally Posted by Skeeterbop (Post 1439103)

Found it for you: Desktop Tool Box - Gift Ideas - Griot's Garage

Originally Posted by kenchan (Post 1439292)

hahaha. :D yah, this is the first time in 7yrs im going to be driving the G throughout winter. with the weight and snow tires i think she will do okay... (?)

my buddy in LA mentioned 42F or something today in socaland? that's pretty cold for you guys. :D was 28F on the way home today for me. kinda chilly.

^^ yah, that's the one, happytheman. :tup:

Originally Posted by Srenity (Post 1439058)

No Z action today. But yesterday I wrapped up the Swift Springs, ichiba camber arms and wheel spacer (15mm & 20mm) that I started this weekend. The job is definetly a pain in the butt without an air impact. Looks pretty good and I like the ride of the Swifts on the short test drive I did. Will get some pics up soon. There is some problem with a low speed only suspension noise that I have not been able to identify. I will do a little searching on here and start a post in the suspension section if I do not find an answer.

Originally Posted by happytheman (Post 1439068)

You may need to twist the spring, as it may not be seated properly.

Originally Posted by Footloose301 (Post 1439170)

Tighten the nut on the top hat now that the weight of the car is compressing the springs. Hold the strut with vice grips and use an open ended wrench to tighten the nut. I had similar issues because mine wasn't tight when I installed the spring over the strut. I thought it was tight at the time.

Originally Posted by Srenity (Post 1439171)

Right now I am thinking that it may be the front sway bar endlink. The noise is only at low speeds and seems constant with some issues I read on other treads. I will check that out when I get some time. Any other potential low speed only clunk causers?

Originally Posted by kenchan (Post 1439292)

my buddy in LA mentioned 42F or something today in socaland? that's pretty cold for you guys. :D was 28F on the way home today for me. kinda chilly.

. :tup:

Originally Posted by ZForce (Post 1439354)

35F this morning in NorCal.... a bit nippy :tup:

Originally Posted by Mt Tam I am (Post 1439603)

We better drive slow on those summer tires, this morning.

Originally Posted by onzedge (Post 1439629)

Yep -- it is 30 here in beautiful Loomis, CA.

Originally Posted by SPOHN (Post 1439717)

Setting up a appointment for some powder coating. Woot!

Originally Posted by SPOHN (Post 1439734)

Strut bar and G3's going wrinkle red

Originally Posted by SPOHN (Post 1439734)

Strut bar and G3's going wrinkle red