What did you do with your Z today

PapoZalsa · 09-28-2011, 07:37 AM

Quote:

Originally Posted by happytheman

You may have posted already and I missed it..but what happened Papo? Sorry to hear your ride is decommissioned.

Quote:

Originally Posted by kenchan

not good. wat happened?

It was a freak accident doing like 20 mph, it happened in split second. The freaking SUV in the right lane impacted the car in front of him. I'm in the left lane, the traffic is slow and it seems that when he impact the car in front of him his SUV slighty jump to my lane as I was passing and I clipped his rear driver bumper with my front passenger side.

Of course the SUV suffered minor damage to the bumper and my car got the worst of it. I didn't expected that much damage at that speed. I have been so pissed that I haven't want to talk about it.

BeachZTT · 09-28-2011, 08:19 AM

Quote:

Originally Posted by PapoZalsa

I haven't done a DAMN thing. My f*cking car is in ICU.

What the heck?

I go out of town for a couple of days and.... Very sorry to hear, Jose. Is is going to be done in time for the show?

I won't be there. We planned our entire fall around Ztoberfest... and they f'n changed the date two weeks after we paid for our WV trip. I am still pissed about that.

TypeOne · 09-28-2011, 09:32 AM

Quote:

Originally Posted by kenchan

Uh oh.... did you scuff up the lug bore hole area with a regular socket?

No!

Yes....

They got scratched the second I put them on. I was just tired of dealing with the thin *** weds coatings so I'm doing something about it. Pics coming soon.

kenchan · 09-28-2011, 09:57 AM

Quote:

Originally Posted by onzedge

Birds know better than to drop on the 40th Quartz.

Quote:

Originally Posted by PapoZalsa

It was a freak accident doing like 20 mph, it happened in split second. The freaking SUV in the right lane impacted the car in front of him. I'm in the left lane, the traffic is slow and it seems that when he impact the car in front of him his SUV slighty jump to my lane as I was passing and I clipped his rear driver bumper with my front passenger side.

Of course the SUV suffered minor damage to the bumper and my car got the worst of it. I didn't expected that much damage at that speed. I have been so pissed that I haven't want to talk about it.

That sucks.

sorry to hear. Wishing you a speedy repair.

Quote:

Originally Posted by TypeOne

No!

Yes....

They got scratched the second I put them on. I was just tired of dealing with the thin *** weds coatings so I'm doing something about it. Pics coming soon.

The paint on the weds is about as good as it gets though. Same thing happens to other wheels too unless you use special sockets or wrap your socket with masking tape where you leverage the bore hole. I just give it 3-4 layers of tape if my protective sockets are in use on another ratchet. No scratches.

. Another reason why I usually roll in my wheels loose than bring the car to the tire store (unless tirerack cause they know how to handle wheels not to scuff them).

onzedge · 09-28-2011, 10:05 AM

I always wrap my socket with painter's tape before I get it near my wheeld.

PapoZalsa · 09-28-2011, 10:18 AM

Quote:

Originally Posted by BeachZTT

What the heck?

I go out of town for a couple of days and.... Very sorry to hear, Jose. Is is going to be done in time for the show?

I won't be there. We planned our entire fall around Ztoberfest... and they f'n changed the date two weeks after we paid for our WV trip. I am still pissed about that.

NOPE, I'm going to miss the Car Show and Fall Foilage Cruise.

Russ we will talk more about it later, I'm still f'nking pissed about it.

kenchan · 09-28-2011, 10:20 AM

Quote:

Originally Posted by onzedge

I always wrap my socket with painter's tape before I get it near my wheeld.

Good morning mr.onzedge.

I have a set of these... but masking tape works good too.

Protective Socket Set - Specialty Tools - Tools - Griot's Garage

onzedge · 09-28-2011, 10:32 AM

Quote:

Originally Posted by kenchan

Good morning mr.onzedge.

I have a set of these... but masking tape works good too.

Protective Socket Set - Specialty Tools - Tools - Griot's Garage

Good morning, Mr. Kenchan.

Those are very nice sockets.

No Z action today, again. Spending today and tomorrow with Microsoft folks and then heading to San Diego/Coronado for goofing off and a convention. I am going to Coronado where I spent Jr High and High School years -- for the first time in many years. Look for pics in the DSLR thread next week.

TypeOne · 09-28-2011, 10:34 AM

Quote:

Originally Posted by kenchan

The paint on the weds is about as good as it gets though. Same thing happens to other wheels too unless you use special sockets or wrap your socket with masking tape where you leverage the bore hole. I just give it 3-4 layers of tape if my protective sockets are in use on another ratchet. No scratches.

. Another reason why I usually roll in my wheels loose than bring the car to the tire store (unless tirerack cause they know how to handle wheels not to scuff them).

True... although the rear 10.5 +15 wheel does have an extremely sunk face which makes it harder than most wheels to bolt lugs on. The coating is great for resisting dust and stains, but I could chip it off with my fingernail.

Oh well, hopefully won't have much of an issue from now on.

kenchan · 09-28-2011, 10:46 AM

Quote:

Originally Posted by onzedge

Good morning, Mr. Kenchan.

Those are very nice sockets.

No Z action today, again. Spending today and tomorrow with Microsoft folks and then heading to San Diego/Coronado for goofing off and a convention. I am going to Coronado where I spent Jr High and High School years -- for the first time in many years. Look for pics in the DSLR thread next week.

sounds like fun.

I too would like to visit areas I grew up in.

Quote:

Originally Posted by TypeOne

True... although the rear 10.5 +15 wheel does have an extremely sunk face which makes it harder than most wheels to bolt lugs on. The coating is great for resisting dust and stains, but I could chip it off with my fingernail.

Oh well, hopefully won't have much of an issue from now on.

I have the same rear wheels as you with the the RR face. No issue on mine. Hope your new paint goes unscuffed.

BeachZTT · 09-29-2011, 08:04 AM

Quote:

Originally Posted by PapoZalsa

NOPE, I'm going to miss the Car Show and Fall Foilage Cruise.

Russ we will talk more about it later, I'm still f'nking pissed about it.

I understand! Hang in there pal. Glad you are ok and it wasn't worse!

onzedge · 09-29-2011, 08:07 AM

Quote:

Originally Posted by BeachZTT

I understand! Hang in there pal. Glad you are ok and it wasn't worse!

Alchemy · 09-29-2011, 08:56 AM

Painted my fob last night.

kenchan · 09-29-2011, 10:26 AM

No Z action today. Need to wash my G later on tonight. Got leaves and worms caught in the wheel well
Ewww.

SPOHN · 09-29-2011, 10:39 AM

Trying to find someone more local to give my car a alignment. Out of 8 shops no one will touch it. Guess I'll have to just drive 70 miles one way back to where it originally was done.

09-28-2011, 10:05 AM	#6890 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 63 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	I always wrap my socket with painter's tape before I get it near my wheeld. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

09-29-2011, 08:56 AM	#6898 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 44 Posts: 4,855 Drives: to acquire tickets Rep Power: 3524	Painted my fob last night. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

09-29-2011, 10:39 AM	#6900 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Trying to find someone more local to give my car a alignment. Out of 8 shops no one will touch it. Guess I'll have to just drive 70 miles one way back to where it originally was done. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM

09-29-2011, 10:26 AM	#6899 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	No Z action today. Need to wash my G later on tonight. Got leaves and worms caught in the wheel well Ewww.