Those with AT, what do you use for MT mode?

dszombiex · 03-11-2010, 04:37 PM

Quote:

Originally Posted by KaienZ34

I also would like to see what the car is doing (gear wise) when it's in the D mode, and why not. It can't be so hard to have programed it in the car from the factory now can it, over site i guess or just to damm lazzzzzzzzzzy !

It wasn't oversight, it was a deliberate design decision so you can tell if you're in auto or manual mode without looking down at the stick.

KaienZ34 · 03-11-2010, 07:34 PM

When in M mode it shows you M and the gear number, I was just wanting it to do the same in D, but when it's displays D the number part that is blank and when in M it shows you what gear you're in that's all why no gear number in both modes is all I was woundering

Vegitto-kun · 03-12-2010, 04:16 AM

has anybody noticed the revs dropping down to 1000ish when you let go of the throttle.

say im in 4th at 3000revs and I let go of the throttle. it just drops down to 1000ish revs and the moment I hit the throttle again it jumps back up to 3000

this is annoying if I need to downshift because I look at the revs says its 1000 I shift but the actual was 3000 BAM 4000 RPM

dszombiex · 03-12-2010, 03:19 PM

Quote:

Originally Posted by Vegitto-kun

has anybody noticed the revs dropping down to 1000ish when you let go of the throttle.

say im in 4th at 3000revs and I let go of the throttle. it just drops down to 1000ish revs and the moment I hit the throttle again it jumps back up to 3000

this is annoying if I need to downshift because I look at the revs says its 1000 I shift but the actual was 3000 BAM 4000 RPM

Yeah I get the same, let go of the throttle and the rpm drops to a bit below 1000.

Vegitto-kun · 03-12-2010, 06:47 PM

I guess it has to do with saving gas?

but it not fun when you cant see when to downshift unless you touch the throttle to see the real revs

romoore14 · 03-13-2010, 01:45 PM

I use both but more the stick than paddles. When I do use the paddles, usually it's when I'm driving in a straight line.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Limp mode @ 3.5k rpm; no cel	zilent_jay	Nissan 370Z General Discussions	56	08-28-2012 09:44 AM
DS mode on the 7at ?	08g37	Nissan 370Z General Discussions	13	02-05-2010 07:28 PM
On to ACC mode	theDreamer	Nissan 370Z General Discussions	6	02-02-2010 04:47 PM
Possible limp mode?	DinoJ	Nissan 370Z General Discussions	21	09-04-2009 04:17 PM
A/C mode	FricFrac	Nissan 370Z General Discussions	12	07-17-2009 06:19 PM

03-11-2010, 07:34 PM	#47 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	When in M mode it shows you M and the gear number, I was just wanting it to do the same in D, but when it's displays D the number part that is blank and when in M it shows you what gear you're in that's all why no gear number in both modes is all I was woundering

03-12-2010, 04:16 AM	#48 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 263	has anybody noticed the revs dropping down to 1000ish when you let go of the throttle. say im in 4th at 3000revs and I let go of the throttle. it just drops down to 1000ish revs and the moment I hit the throttle again it jumps back up to 3000 this is annoying if I need to downshift because I look at the revs says its 1000 I shift but the actual was 3000 BAM 4000 RPM

03-12-2010, 06:47 PM	#50 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 263	I guess it has to do with saving gas? but it not fun when you cant see when to downshift unless you touch the throttle to see the real revs

03-13-2010, 01:45 PM	#51 (permalink)
romoore14 Base Member Join Date: Feb 2010 Location: Baytown, TX Posts: 53 Drives: 10',370Z,Red,A/T,SPk Rep Power: 16	I use both but more the stick than paddles. When I do use the paddles, usually it's when I'm driving in a straight line.