Injected Performance 370Z dyno video, 258whp DD

Crash · 01-23-2009, 02:33 PM

OK... Then those numbers make sense.

caj77 · 01-23-2009, 04:35 PM

Im not able to see the video?

Skaterbasist · 01-23-2009, 04:36 PM

Quote:

Originally Posted by Dreamin'Z

i thought someone else posted a dyno at like 290 rwhp, I guess they were just blowin smoke

No, you (along with a majority of car enthusiast) just don't seem to understand how dyno's work

258 whp is great for a Dyno Dynamics aka "The Heart Breaker"

Skaterbasist · 01-23-2009, 04:38 PM

Quote:

Originally Posted by shumby

this dyno is more in line wth what the G37 is getting.

G37's and 370Z's make the same numbers... they have the same engine to begin with.

Skaterbasist · 01-23-2009, 04:42 PM

Quote:

Originally Posted by Crash

Are dyno dynamics generally lower than the other dynos?

Only lower one I can think of is a Mustang Dyno (iirc).

In terms of output, this is what the typical order usually looks like:

Dynapacks <-- Dynojets <-- Dyno Dynamics <-- Mustang Dyno

Ofcourse, this can always very since calibration might be to one extreme in a few cases.

shumby · 01-23-2009, 04:48 PM

well nissan says the Z has 2 more HP lol

Skaterbasist · 01-23-2009, 05:00 PM

Quote:

Originally Posted by shumby

well nissan says the Z has 2 more HP lol

They must be hiding a JDM sticker somewhere around the engine bay

1stNissan · 01-23-2009, 05:43 PM

This comes out to 22% drivetrain lose? I always thought the rull of thumb was 15%. Is this because of low TQ or the IRS?

Skaterbasist · 01-23-2009, 05:49 PM

Quote:

Originally Posted by 1stNissan

This comes out to 22% drivetrain lose? I always thought the rull of thumb was 15%. Is this because of low TQ or the IRS?

Read post 7, 18, and 20...

Crash · 01-23-2009, 07:22 PM

Interesting. I'll get a few dyno pulls done at HMS and post the results as soon as mine is broken in.

Ryephile · 01-23-2009, 11:14 PM

The AFR's are a whiff rich for N/A. The chart shows mainly in the upper 11's:1, which would be perfect for a boosted port injected engine, but perhaps a tiny bit too rich for N/A. Taking into account E10 we all run, 12.7:1 to 12.3:1 should yield peak torque.

Thanks for posting the video and tidbits!

370z2 · 01-24-2009, 11:25 AM

This Dyno is pointless. Its the only dyno of its kind the puts down such low numbers. Not even a mustang dyno will give numbers like that. There are numerous dynos showing the Z putting down almost 290whp, that is consistant to what the crank 332hp is putting out. If the Z was a 332hp car that only put down 250whp then the Z would 80+ hp to drivetrain loss and that is not the reality.

LiquidZ · 01-24-2009, 11:32 AM

Man, I love that color.

Great sound!

Cown3d · 01-24-2009, 01:24 PM

Quote:

Originally Posted by 370z2

This Dyno is pointless. Its the only dyno of its kind the puts down such low numbers. Not even a mustang dyno will give numbers like that. There are numerous dynos showing the Z putting down almost 290whp, that is consistant to what the crank 332hp is putting out. If the Z was a 332hp car that only put down 250whp then the Z would 80+ hp to drivetrain loss and that is not the reality.

o but so wrong you are

see the thing is this dyno dynamics and mustang dyno's are 'loaded' dyno
they simulate the weight of having to move the car also!
so when you on a dyno jet and get your 290whp, thats just how much you can make to the wheels
when you make that power on a loaded dyno thats the power you actually HAVE moving the car.
also they are alot better for tuning because they simulate actual load on the motor and drivetrain better, providing more accurate tuning

RCZ · 01-24-2009, 05:41 PM

Quote:

Originally Posted by Cown3d

o but so wrong you are

see the thing is this dyno dynamics and mustang dyno's are 'loaded' dyno
they simulate the weight of having to move the car also!
so when you on a dyno jet and get your 290whp, thats just how much you can make to the wheels
when you make that power on a loaded dyno thats the power you actually HAVE moving the car.
also they are alot better for tuning because they simulate actual load on the motor and drivetrain better, providing more accurate tuning

+1

Both of these are excellent when it comes to tuning. If I could, I would only get tuned on these. It may read lower, but I don't care about numbers; I care about accuracy, consistency and real usable power.

01-23-2009, 02:33 PM	#16 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 590	OK... Then those numbers make sense. __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

01-23-2009, 04:48 PM	#21 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	well nissan says the Z has 2 more HP lol __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

01-23-2009, 07:22 PM	#25 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 590	Interesting. I'll get a few dyno pulls done at HMS and post the results as soon as mine is broken in. __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

01-23-2009, 11:14 PM	#26 (permalink)
Ryephile Base Member Join Date: Nov 2008 Location: Metro-Detroit Posts: 23 Drives: '02 Cooper S Rep Power: 17	The AFR's are a whiff rich for N/A. The chart shows mainly in the upper 11's:1, which would be perfect for a boosted port injected engine, but perhaps a tiny bit too rich for N/A. Taking into account E10 we all run, 12.7:1 to 12.3:1 should yield peak torque. Thanks for posting the video and tidbits! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any guestimates on performance?	sbsmoov	Nissan 370Z General Discussions	24	03-23-2017 06:14 PM
Forged Performance: 370Z Volk Wheel fitments are coming now!!!	Sharif@Forged	Wheels & Tires	121	06-19-2009 08:38 AM
GT Motorsports Dyno the First 370Z in the US: 290 RWHP!!! (Approx.)	AK370Z	Nissan 370Z General Discussions	39	01-24-2009 07:00 PM
Howard's 2009 Corvette ZR1 on the Dyno	AK370Z	Other Vehicles	1	11-15-2008 01:38 PM

01-23-2009, 04:35 PM	#17 (permalink)
caj77 Base Member Join Date: Dec 2008 Location: St Pete FL Posts: 30 Drives: 911 Rep Power: 17	Im not able to see the video?

01-23-2009, 05:43 PM	#23 (permalink)
1stNissan Base Member Join Date: Jan 2009 Location: FL Posts: 7 Drives: 98 TransAm LSwon Rep Power: 17	This comes out to 22% drivetrain lose? I always thought the rull of thumb was 15%. Is this because of low TQ or the IRS?

01-24-2009, 11:25 AM	#27 (permalink)
370z2 Base Member Join Date: Jan 2009 Location: Miami Fl Posts: 15 Drives: GTI Turbo Rep Power: 291	This Dyno is pointless. Its the only dyno of its kind the puts down such low numbers. Not even a mustang dyno will give numbers like that. There are numerous dynos showing the Z putting down almost 290whp, that is consistant to what the crank 332hp is putting out. If the Z was a 332hp car that only put down 250whp then the Z would 80+ hp to drivetrain loss and that is not the reality.

01-24-2009, 11:32 AM	#28 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	Man, I love that color. Great sound!