Why Did My Z, Keep Revving? Video.

MightyBobo

As long as the clutch is pressed in, SRM will try to blip the throttle when the shifter is moved around. The 3 "major" positions are 1/2, 3/4, and 5/6 of course. If you shift to neutral, clutch pressed in, and release the shifter to its dead-center position, SRM will automatically blip to the MINIMUM amount for the highest gear in that position. That'd be 4th gear. If you decide to go into 3rd, it will of course, blip higher. Same goes for 1/2....it will rev to 2nd gear as soon as you slide to the left, but if you go into 1st instead, it will go higher.

Purpose for this is because its not going to assume you want to rev to the LOWER gear automatically, more than likely to save gas Im sure. Its obviously fast enough to catch if you decide to go higher, and blip accordingly.

If you dont want SRM mucking with your RPM's when you move the shifter in the positions, just release your clutch...SRM stops blipping at that point.

__________________
I don't own a car anymore.

JB1

OK, that makes sense, thanks for the explanation.

But I did notice that, if you leave the shifter in neutral and you release the clutch, SRM will still hold the RPMs up for a few seconds. Not that is matters though, just an observation.

__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //