07-16-2018, 09:02 AM
|
#1 (permalink)
|
|
Base Member
Join Date: Aug 2017
Location: Dayton
Posts: 65
Drives: 90 300zx TT
Rep Power: 8
|
Quote:
Originally Posted by Rusty
Will it fit with a 34 row oil cooler? I have the Z1 cooler and it's tall. My oil lines run across the top of the crash bar.
|
Rusty,
The V2 was made with the Z1 Setrab 34 row oil cooler kit installed. It will fit, but not with the lines located and ran the original way Z1 has in their installation manual, I have a PDF manual that addresses this issue and shows you how to reroute the lines. It is fairly simple.. You just have to take the lines behind the vertical core support bar opposed to in front of the bar and over the air filter.
There is a little V at the top of the vertical core support bar, the two lines just have to run behind that relief and in front of the condenser to clear. This particularly pertains to those who are running a 34 row oil cooler and an aftermarket radiator.
If need be, you can always call me and I can walk you through it in a few minutes.
Let me know if you have anymore questions.
Last edited by Joe@DewlaDez; 07-16-2018 at 09:23 AM.
Reason: typo
|
|
|
Similar Threads
13Likes
Hybrid Mode
