Nissan 370Z Forum
Page 360 of 435 « First 260310350358359 360 361362370410 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today V (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/122002-what-did-you-do-your-z-today-v-topic-discussion-only.html)

Spooler 06-11-2021 01:06 PM
Quote:
Originally Posted by redondoaveb (Post 3998030)
I'm going to have Specialty Z drill about a 2" hole in the Z1 undershroud so I can pop the drain hose out of the hole to make draining easier
Have him hole saw where the filter is so you don't have to take the under shroud off when changing oil.

Averying 06-11-2021 01:45 PM
Installed AEM oil pressure sensor
 
2 Attachment(s)
Finally got my AEM oil pressure gauge installed. Mounting this with the GTM oil filter relocation kit meant I couldn’t put the sensor at the stock location with a tee fitting. Had to purchase a -8an male/fem fitting with a 1/8” npt port. Tee’d the sensor on the oil line right before the oil goes into the filter.

Sitting at around ~35 psi at hot idle... thankfully the gallery gaskets on my ‘09 are still hanging in there.

sportsman2003 06-11-2021 01:51 PM
Quote:
Originally Posted by Averying (Post 3998380)
Finally got my AEM oil pressure gauge installed. Mounting this with the GTM oil filter relocation kit meant I couldn’t put the sensor at the stock location with a tee fitting. Had to purchase a -8an male/fem fitting with a 1/8” npt port. Tee’d the sensor on the oil line right before the oil goes into the filter.

Sitting at around ~35 psi at hot idle... thankfully the gallery gaskets on my ‘09 are still hanging in there.
What are you running? 40wt oil?

redondoaveb 06-11-2021 02:30 PM
Quote:
Originally Posted by Spooler (Post 3998371)
Have him hole saw where the filter is so you don't have to take the under shroud off when changing oil.
It would have to be one big hole

Zingston 06-11-2021 03:54 PM
Quote:
Originally Posted by redondoaveb (Post 3998384)
It would have to one big hole

Ahhhh, he's used to those kinds of holes.

Rusty 06-11-2021 06:04 PM
Quote:
Originally Posted by Averying (Post 3998380)
Finally got my AEM oil pressure gauge installed. Mounting this with the GTM oil filter relocation kit meant I couldn’t put the sensor at the stock location with a tee fitting. Had to purchase a -8an male/fem fitting with a 1/8” npt port. Tee’d the sensor on the oil line right before the oil goes into the filter.

Sitting at around ~35 psi at hot idle... thankfully the gallery gaskets on my ‘09 are still hanging in there.
That's where mine runs at.

bensnaidero 06-11-2021 06:32 PM
2 Attachment(s)
Added touring pedals to my sport model

Attachment 147332

And a custom garage door opener button

Attachment 147333

redondoaveb 06-11-2021 07:11 PM
2 Attachment(s)
I had an extra set of tail lights so I said what the hell and had them lightly smoked

Ventruck 06-11-2021 08:08 PM
1 Attachment(s)
Finally got the elusive Calsonic 2nd cup holder.
Sorry for dirty pic.

I have an ST but never use the input ports. This actually doesn't help me at all lol. I lose space and the cupholder is only good for wide midget drinks at best. I was just peeved I never had it.

Averying 06-15-2021 04:10 PM
Quote:
Originally Posted by sportsman2003 (Post 3998382)
What are you running? 40wt oil?
Nope, running 5w-30

TreeSemdyZee 06-15-2021 04:18 PM
Quote:
Originally Posted by Ventruck (Post 3998407)
Finally got the elusive Calsonic 2nd cup holder.
Sorry for dirty pic.

I have an ST but never use the input ports. This actually doesn't help me at all lol. I lose space and the cupholder is only good for wide midget drinks at best. I was just peeved I never had it.
Hey! Now that you found one, I've got one in a drawer that I don't use. :icon18:

TreeSemdyZee 06-15-2021 04:20 PM
Quote:
Originally Posted by redondoaveb (Post 3998404)
I had an extra set of tail lights so I said what the hell and had them lightly smoked
Hickory or oak?
(Sorry. I'm in a goofy mood.) :excited:

redondoaveb 06-15-2021 05:02 PM
Quote:
Originally Posted by TreeSemdyZee (Post 3998783)
Hickory or oak?
(Sorry. I'm in a goofy mood.) :excited:
Bong, too hard to roll :rofl2:

Ventruck 06-15-2021 07:44 PM
Quote:
Originally Posted by TreeSemdyZee (Post 3998782)
Hey! Now that you found one, I've got one in a drawer that I don't use. :icon18:
Danggit.

:icon17:

Rusty 06-15-2021 08:09 PM
Quote:
Originally Posted by TreeSemdyZee (Post 3998783)
Hickory or oak?
(Sorry. I'm in a goofy mood.) :excited:
Quote:
Originally Posted by redondoaveb (Post 3998788)
Bong, too hard to roll :rofl2:
I was going to say Hawaiian Gold, or Mexican Dirt cover with paraquat with a THC kicker. :icon14:


All times are GMT -5. The time now is 06:11 PM.
Page 360 of 435 « First 260310350358359 360 361362370410 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2