Shout out to ryan @ rjm

fantaZ · 07-06-2016, 06:56 PM

Quote:

Originally Posted by dvboy

Mishuko your illustration perfectly matches my thoughts on this pedal.Got mine this morning,took me 2 hours with the installation taking my time.I left it at the recommended 75%,feels much better,why Nissan couldn't do this from the start is beyond stupid.My car is a 2016,and another motivation for me to get this pedal is Ryan claims it will help(solve) the csc issues,that certainly is a nice side effect.

go a little further like i did 90. Ryan said it was fine for stock clutch made the car as easy to drive as a 4 speed honda civic lol.

dvboy · 07-06-2016, 09:34 PM

I might play with it with a bit and bump it up to 80,but wow,what a nice improvement to the drivability of the car.

mishuko · 07-07-2016, 05:29 AM

it will help prevent it but no guarantees it won't fail.

I would still upgrade your csc and replace the master when the time comes

fantaZ · 07-07-2016, 10:24 AM

Quote:

Originally Posted by dvboy

I might play with it with a bit and bump it up to 80,but wow,what a nice improvement to the drivability of the car.

Fact thats why i started this shout out for a great product. Changes the drivability from one of the worst clutch feel's i have ever felt I.E.>and i have driven many. former valet parker here and stick car owner since the 80's. To a very smooth driving feel.

Zthirty4NISMO · 07-07-2016, 03:17 PM

Anyone find that this pedal also helps with downshifting when using rev match? I find that with the stock pedal, it's hard to get a fully dampened downshift (no jerk/lunging) in the low-mid rpm range. The downshift seems to get fully dampened at a higher rpm.

Just wondering.

dvboy · 07-07-2016, 07:40 PM

I will be installing another pedal for a buddy of mine,this time I will spend the extra 5 min to remove the drivers seat.No doubt it will be well worth the time for bigger guys.

fantaZ · 07-08-2016, 01:03 PM

Quote:

Originally Posted by dvboy

I will be installing another pedal for a buddy of mine,this time I will spend the extra 5 min to remove the drivers seat.No doubt it will be well worth the time for bigger guys.

I here that I am 5'11'' 212lbs and the install tweaked every bone i have. If i had to do it again the seat would have been removed.

ChaseZ · 07-08-2016, 02:16 PM

That's a good idea, I'll have to do that.
My pedal is out for delivery in the brown truck as we speak

dvboy · 07-08-2016, 07:25 PM

I have tinkered around with different settings,for me the 75% setting Ryan ships it out with is the best.Great product!!!!!

fantaZ · 07-08-2016, 11:00 PM

Yea Ryan did his homework on the unit 75% is great setting.

night blade · 07-09-2016, 05:31 PM

Just got back from Ryan installing the new 3.1 clutch, I got used to 75% pretty quickly, just dead on in my books.

fantaZ · 07-09-2016, 08:45 PM

Quote:

Originally Posted by night blade

Just got back from Ryan installing the new 3.1 clutch, I got used to 75% pretty quickly, just dead on in my books.

How do you like it compared to the stock unit?

night blade · 07-10-2016, 08:30 AM

Quote:

Originally Posted by fantaZ

How do you like it compared to the stock unit?

First off much more smoother shifts, not as much jerkiness from 1 - 2, longer engage means more play with throttle, all equals happy me

WELL ZED · 07-12-2016, 11:22 AM

Just for clarification, is 75% a lower engagement point than 50% or higher? What is the OEM %?

Akinari · 07-12-2016, 12:01 PM

Stock = 0, which engages quite high off the floor.
75 ~ 80 is where I have mine, makes a world of difference to the car.
Usually I take things off the internet with a grain of salt, but I bite the bullet after so many positive reviews, and seriously this assembly is what everyone claims it to be!

I initially had the helper spring removed, but rjm changes everything!

07-06-2016, 09:34 PM	#32 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	I might play with it with a bit and bump it up to 80,but wow,what a nice improvement to the drivability of the car. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

07-07-2016, 07:40 PM	#36 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	I will be installing another pedal for a buddy of mine,this time I will spend the extra 5 min to remove the drivers seat.No doubt it will be well worth the time for bigger guys. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

07-08-2016, 07:25 PM	#39 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	I have tinkered around with different settings,for me the 75% setting Ryan ships it out with is the best.Great product!!!!! __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

07-09-2016, 05:31 PM	#41 (permalink)
night blade Base Member Join Date: Apr 2015 Location: Pickering, Ontario Posts: 131 Drives: 2016 Nissan 370Z Rep Power: 9	Just got back from Ryan installing the new 3.1 clutch, I got used to 75% pretty quickly, just dead on in my books. __________________ 2016 Nissan 370z Base 6MT Pearl White \| RJM Performance 2012 Kia Sportage 6AT (the short bus)

07-12-2016, 12:01 PM	#45 (permalink)
Akinari Base Member Join Date: Jun 2015 Location: Markham,ON Posts: 42 Drives: 10 370z Mont Blue M6 Rep Power: 9	Stock = 0, which engages quite high off the floor. 75 ~ 80 is where I have mine, makes a world of difference to the car. Usually I take things off the internet with a grain of salt, but I bite the bullet after so many positive reviews, and seriously this assembly is what everyone claims it to be! I initially had the helper spring removed, but rjm changes everything! fantaZ and WELL ZED like this.

07-07-2016, 05:29 AM	#33 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9434	it will help prevent it but no guarantees it won't fail. I would still upgrade your csc and replace the master when the time comes

07-07-2016, 03:17 PM	#35 (permalink)
Zthirty4NISMO Base Member Join Date: Oct 2014 Location: South Dakota Posts: 214 Drives: DRKNITE Rep Power: 10	Anyone find that this pedal also helps with downshifting when using rev match? I find that with the stock pedal, it's hard to get a fully dampened downshift (no jerk/lunging) in the low-mid rpm range. The downshift seems to get fully dampened at a higher rpm. Just wondering.

07-08-2016, 02:16 PM	#38 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94682	That's a good idea, I'll have to do that. My pedal is out for delivery in the brown truck as we speak

07-08-2016, 11:00 PM	#40 (permalink)
fantaZ Enthusiast Member Join Date: Mar 2016 Location: FL Posts: 273 Drives: 2013 370z nismo Rep Power: 9	Yea Ryan did his homework on the unit 75% is great setting.

07-12-2016, 11:22 AM	#44 (permalink)
WELL ZED Base Member Join Date: May 2016 Location: Northern Virginia Posts: 83 Drives: #822 40th Rep Power: 8	Just for clarification, is 75% a lower engagement point than 50% or higher? What is the OEM %?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ryan Lochte is now one of us!	enkei2k	Nissan 370Z General Discussions	17	07-06-2012 08:24 AM
Ryan Seacrest hosting the Olympics WTF!? TERRIBLE	brucelidat	Sports	8	04-14-2012 10:13 PM
Ryan Gates EVO	ct63084	Other Vehicles	0	05-30-2010 08:29 PM
Hi, IM Ryan I am new to the Forum....	Ryno1980	New Forum Member	10	03-29-2010 06:21 PM
New Member - Ryan@MR Works	Ryan@MRWorks	New Forum Member	5	12-01-2009 08:04 AM