Good first projects for a beginner

Joe1561 · 06-14-2016, 12:37 PM

I couldn't find a thread like this so post some first things to do to your car such as cold air intakes, Sound deadners etc

Sent from my iPhone using Tapatalk

TerribleONE · 06-14-2016, 12:40 PM

Stillen G3
Replace map lights/hatch/license plate lights with LED bulbs
Shift knob

All I can really think of right now

Joe1561 · 06-14-2016, 12:42 PM

Are muffs not considered?

Sent from my iPhone using Tapatalk

TerribleONE · 06-14-2016, 12:43 PM

Quote:

Originally Posted by Joe1561

Are muffs not considered?

Sent from my iPhone using Tapatalk

They are not hard to change with the proper tools/equipment.

Joe1561 · 06-14-2016, 12:51 PM

Thanks for the input, let's see what other people think

Sent from my iPhone using Tapatalk

gomer_110 · 06-14-2016, 12:55 PM

This all depends on what the car is going to be used for.

For performance driving:
Front sway bar (as stiff as you can get)
Clutch-type LSD

and most importantly...

tighten the nut behind the wheel.

Joe1561 · 06-14-2016, 12:57 PM

Hmm DD and going to meets so aesthetics and comfortable driving

Sent from my iPhone using Tapatalk

sgosh · 06-14-2016, 01:18 PM

Quote:

Originally Posted by gomer_110

... and most importantly...

tighten the nut behind the wheel.

Solid advice!

sgosh · 06-14-2016, 01:21 PM

Your first week behind the wheel, and your DIY chops, will likely dictate your first project.

For me, it was a swap of the factory audio head-unit, followed by sound-deadening the trunk.

Exhaust work is way out of my league, but I'm currently working towards replacing the anemic-sounding stock exhaust.

So far, I find the Z has more than enough power to keep me entertained, so upping torque is something I will likely leave until much later, if ever.

As has been said, it's all about your personal priorities.

Joe1561 · 06-14-2016, 01:26 PM

Quote:

Originally Posted by sgosh

Your first week behind the wheel, and your DIY chops, will likely dictate your first project.

For me, it was a swap of the factory audio head-unit, followed by sound-deadening the trunk.

Exhaust work is way out of my league, but I'm currently working towards replacing the anemic-sounding stock exhaust.

So far, I find the Z has more than enough power to keep me entertained, so upping torque is something I will likely leave until much later, if ever.

As has been said, it's all about your personal priorities.

Deadening the trunk? Only? Why not all the wheel wells and all that jazz

Sent from my iPhone using Tapatalk

Duc_Z09 · 06-14-2016, 01:31 PM

Mine was a new shift knob. A buddy of mine has a lathe...

DeliriousClam · 06-14-2016, 01:55 PM

I did the stereo, exhaust, cats, and intakes all at the same time when I first got it

Slartibartfas · 06-14-2016, 02:14 PM

Quote:

Originally Posted by TerribleONE

[Muffs] are not hard to change with the proper tools/equipment.

Such as lawyers and cubic yards of money?

Chuck33079 · 06-14-2016, 02:19 PM

Quote:

Originally Posted by Joe1561

I couldn't find a thread like this so post some first things to do to your car such as cold air intakes, Sound deadners etc

Sent from my iPhone using Tapatalk

[Official] Which 1st mod(s) for my Z thread.

It's a sticky, dude. Read threads before making new ones. This forum has been around long enough to already have the answers to your questions. We don't need a new thread for each instance of a new member asking an old question.

SouthArk370Z · 06-14-2016, 02:23 PM

Quote:

Originally Posted by Joe1561

Deadening the trunk? Only? Why not all the wheel wells and all that jazz

The rear area is where most of the road noise comes from. The rear wheel wells are usually considered part of the job. The rear is also pretty easy to access - not so much the doors, &c.

06-14-2016, 12:37 PM	#1 (permalink)
Joe1561 Base Member Join Date: Jun 2016 Location: Denver, Colorado Posts: 78 Drives: 370z Rep Power: 8	Good first projects for a beginner I couldn't find a thread like this so post some first things to do to your car such as cold air intakes, Sound deadners etc Sent from my iPhone using Tapatalk

06-14-2016, 12:40 PM	#2 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Stillen G3 Replace map lights/hatch/license plate lights with LED bulbs Shift knob All I can really think of right now __________________ 638WHP 541WTQ @ 13.5PSI Build thread Last edited by TerribleONE; 06-14-2016 at 03:00 PM.

06-14-2016, 12:55 PM	#6 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	This all depends on what the car is going to be used for. For performance driving: Front sway bar (as stiff as you can get) Clutch-type LSD and most importantly... tighten the nut behind the wheel. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

06-14-2016, 01:21 PM	#9 (permalink)
sgosh Base Member Join Date: Dec 2015 Location: New Westminster, BC Age: 54 Posts: 234 Drives: 16 370Z 14 X6 12 TL Rep Power: 10	Your first week behind the wheel, and your DIY chops, will likely dictate your first project. For me, it was a swap of the factory audio head-unit, followed by sound-deadening the trunk. Exhaust work is way out of my league, but I'm currently working towards replacing the anemic-sounding stock exhaust. So far, I find the Z has more than enough power to keep me entertained, so upping torque is something I will likely leave until much later, if ever. As has been said, it's all about your personal priorities. __________________ History: Pontiac-> Honda-> Datsun-> Toyota-> Chevy-> Acura. Currently: Acura, BMW and Nissan.

06-14-2016, 01:31 PM	#11 (permalink)
Duc_Z09 Track Member Join Date: Jan 2014 Location: Frederick MD Posts: 876 Drives: With the blinker on. Rep Power: 23	Mine was a new shift knob. A buddy of mine has a lathe... __________________ 2009 370z #206 (all mods are Home Depot) 2009 Ducati 848 (full Ohlins, Termignoni, etc) 2003 Grand Cherokee (long arms, big tires, 4.56, lockers)

06-14-2016, 12:42 PM	#3 (permalink)
Joe1561 Base Member Join Date: Jun 2016 Location: Denver, Colorado Posts: 78 Drives: 370z Rep Power: 8	Are muffs not considered? Sent from my iPhone using Tapatalk

06-14-2016, 12:51 PM	#5 (permalink)
Joe1561 Base Member Join Date: Jun 2016 Location: Denver, Colorado Posts: 78 Drives: 370z Rep Power: 8	Thanks for the input, let's see what other people think Sent from my iPhone using Tapatalk

06-14-2016, 12:57 PM	#7 (permalink)
Joe1561 Base Member Join Date: Jun 2016 Location: Denver, Colorado Posts: 78 Drives: 370z Rep Power: 8	Hmm DD and going to meets so aesthetics and comfortable driving Sent from my iPhone using Tapatalk

06-14-2016, 01:55 PM	#12 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 30 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54271	I did the stereo, exhaust, cats, and intakes all at the same time when I first got it __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Beginner HP increase build	iElliott v2	Engine & Drivetrain	16	01-14-2016 12:57 PM
Audio help for a beginner?	StanceZ37	Audio & Video	127	05-31-2015 09:58 PM
Beginner help please	Naum16	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	17	03-28-2013 01:07 PM
Beginner Motorcycle	delusional	Other Vehicles	37	06-13-2012 08:12 AM
Beginner needs advice!	Autobahn	Intake/Exhaust	25	06-18-2009 05:58 AM